mirror of
https://github.com/moby/moby.git
synced 2026-01-11 18:51:37 +00:00
76417bf763
Commit 0546d90 introduced the use of ipset to reduce the number
of rules that need to be processed per-packet, and make the code
a bit simpler.
But, docker's used on embedded kernels compiled without support
for ipset, so the change is too disruptive.
Replace the two ipset rules with a new chain that writes out the
rule's actions long-hand. So ..
This rule:
-A FORWARD -m set --match-set docker-ext-bridges-v4 dst \
-m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
Is transformed into a per-bridge rule in new chain DOCKER-CT:
-A DOCKER-FORWARD -j DOCKER-CT
-A DOCKER-CT -o docker0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A DOCKER-CT -o bridge1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
And:
-A FORWARD -m set --match-set docker-ext-bridges-v4 dst -j DOCKER
Is transformed into a per-bridge rule in new chain DOCKER-BRIDGE:
-A DOCKER-FORWARD -j DOCKER-BRIDGE
-A DOCKER-BRIDGE -o docker0 -j DOCKER
-A DOCKER-BRIDGE -o bridge1 -j DOCKER
Signed-off-by: Rob Murray <rob.murray@docker.com>
8.2 KiB
8.2 KiB
Container on a user-defined network, with a port published on a loopback address
Adding a network running a container with a port mapped on a loopback address, equivalent to:
docker network create \
-o com.docker.network.bridge.name=bridge1 \
--subnet 192.0.2.0/24 --gateway 192.0.2.1 bridge1
docker run --network bridge1 -p 127.0.0.1:8080:80 --name c1 busybox
The filter and nat tables are identical to nat mode:
filter table
Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
1 0 0 DOCKER-USER 0 -- * * 0.0.0.0/0 0.0.0.0/0
2 0 0 DOCKER-FORWARD 0 -- * * 0.0.0.0/0 0.0.0.0/0
Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
Chain DOCKER (2 references)
num pkts bytes target prot opt in out source destination
1 0 0 ACCEPT 6 -- !bridge1 bridge1 0.0.0.0/0 192.0.2.2 tcp dpt:80
2 0 0 DROP 0 -- !docker0 docker0 0.0.0.0/0 0.0.0.0/0
3 0 0 DROP 0 -- !bridge1 bridge1 0.0.0.0/0 0.0.0.0/0
Chain DOCKER-BRIDGE (1 references)
num pkts bytes target prot opt in out source destination
1 0 0 DOCKER 0 -- * docker0 0.0.0.0/0 0.0.0.0/0
2 0 0 DOCKER 0 -- * bridge1 0.0.0.0/0 0.0.0.0/0
Chain DOCKER-CT (1 references)
num pkts bytes target prot opt in out source destination
1 0 0 ACCEPT 0 -- * docker0 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED
2 0 0 ACCEPT 0 -- * bridge1 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED
Chain DOCKER-FORWARD (1 references)
num pkts bytes target prot opt in out source destination
1 0 0 DOCKER-CT 0 -- * * 0.0.0.0/0 0.0.0.0/0
2 0 0 DOCKER-ISOLATION-STAGE-1 0 -- * * 0.0.0.0/0 0.0.0.0/0
3 0 0 DOCKER-BRIDGE 0 -- * * 0.0.0.0/0 0.0.0.0/0
4 0 0 ACCEPT 0 -- docker0 * 0.0.0.0/0 0.0.0.0/0
5 0 0 ACCEPT 0 -- bridge1 * 0.0.0.0/0 0.0.0.0/0
Chain DOCKER-ISOLATION-STAGE-1 (1 references)
num pkts bytes target prot opt in out source destination
1 0 0 DOCKER-ISOLATION-STAGE-2 0 -- docker0 !docker0 0.0.0.0/0 0.0.0.0/0
2 0 0 DOCKER-ISOLATION-STAGE-2 0 -- bridge1 !bridge1 0.0.0.0/0 0.0.0.0/0
Chain DOCKER-ISOLATION-STAGE-2 (2 references)
num pkts bytes target prot opt in out source destination
1 0 0 DROP 0 -- * bridge1 0.0.0.0/0 0.0.0.0/0
2 0 0 DROP 0 -- * docker0 0.0.0.0/0 0.0.0.0/0
Chain DOCKER-USER (1 references)
num pkts bytes target prot opt in out source destination
1 0 0 RETURN 0 -- * * 0.0.0.0/0 0.0.0.0/0
-P INPUT ACCEPT
-P FORWARD ACCEPT
-P OUTPUT ACCEPT
-N DOCKER
-N DOCKER-BRIDGE
-N DOCKER-CT
-N DOCKER-FORWARD
-N DOCKER-ISOLATION-STAGE-1
-N DOCKER-ISOLATION-STAGE-2
-N DOCKER-USER
-A FORWARD -j DOCKER-USER
-A FORWARD -j DOCKER-FORWARD
-A DOCKER -d 192.0.2.2/32 ! -i bridge1 -o bridge1 -p tcp -m tcp --dport 80 -j ACCEPT
-A DOCKER ! -i docker0 -o docker0 -j DROP
-A DOCKER ! -i bridge1 -o bridge1 -j DROP
-A DOCKER-BRIDGE -o docker0 -j DOCKER
-A DOCKER-BRIDGE -o bridge1 -j DOCKER
-A DOCKER-CT -o docker0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A DOCKER-CT -o bridge1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A DOCKER-FORWARD -j DOCKER-CT
-A DOCKER-FORWARD -j DOCKER-ISOLATION-STAGE-1
-A DOCKER-FORWARD -j DOCKER-BRIDGE
-A DOCKER-FORWARD -i docker0 -j ACCEPT
-A DOCKER-FORWARD -i bridge1 -j ACCEPT
-A DOCKER-ISOLATION-STAGE-1 -i docker0 ! -o docker0 -j DOCKER-ISOLATION-STAGE-2
-A DOCKER-ISOLATION-STAGE-1 -i bridge1 ! -o bridge1 -j DOCKER-ISOLATION-STAGE-2
-A DOCKER-ISOLATION-STAGE-2 -o bridge1 -j DROP
-A DOCKER-ISOLATION-STAGE-2 -o docker0 -j DROP
-A DOCKER-USER -j RETURN
nat table
Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
1 0 0 DOCKER 0 -- * * 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL
Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
1 0 0 DOCKER 0 -- * * 0.0.0.0/0 !127.0.0.0/8 ADDRTYPE match dst-type LOCAL
Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
1 0 0 MASQUERADE 0 -- * !bridge1 192.0.2.0/24 0.0.0.0/0
2 0 0 MASQUERADE 0 -- * !docker0 172.17.0.0/16 0.0.0.0/0
Chain DOCKER (2 references)
num pkts bytes target prot opt in out source destination
1 0 0 RETURN 0 -- bridge1 * 0.0.0.0/0 0.0.0.0/0
2 0 0 RETURN 0 -- docker0 * 0.0.0.0/0 0.0.0.0/0
3 0 0 DNAT 6 -- !bridge1 * 0.0.0.0/0 127.0.0.1 tcp dpt:8080 to:192.0.2.2:80
-P PREROUTING ACCEPT
-P INPUT ACCEPT
-P OUTPUT ACCEPT
-P POSTROUTING ACCEPT
-N DOCKER
-A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER
-A OUTPUT ! -d 127.0.0.0/8 -m addrtype --dst-type LOCAL -j DOCKER
-A POSTROUTING -s 192.0.2.0/24 ! -o bridge1 -j MASQUERADE
-A POSTROUTING -s 172.17.0.0/16 ! -o docker0 -j MASQUERADE
-A DOCKER -i bridge1 -j RETURN
-A DOCKER -i docker0 -j RETURN
-A DOCKER -d 127.0.0.1/32 ! -i bridge1 -p tcp -m tcp --dport 8080 -j DNAT --to-destination 192.0.2.2:80
Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
1 0 0 DROP 6 -- !lo * 0.0.0.0/0 127.0.0.1 tcp dpt:8080
2 0 0 DROP 6 -- !bridge1 * 0.0.0.0/0 192.0.2.2 tcp dpt:80
Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
iptables commands
-P PREROUTING ACCEPT
-P OUTPUT ACCEPT
-A PREROUTING -d 127.0.0.1/32 ! -i lo -p tcp -m tcp --dport 8080 -j DROP
-A PREROUTING -d 192.0.2.2/32 ! -i bridge1 -p tcp -m tcp --dport 80 -j DROP
filterPortMappedOnLoopback adds an extra rule in the raw-PREROUTING chain to DROP remote traffic destined to the port mapped on the loopback address.