Implement the COPY operator within the builder

Make sure the destination directory exists when using docker insert
Add insert command in order to insert external files within an image
2026-01-12 11:11:44 +00:00 · 2013-04-24 14:28:51 -07:00 · 2013-04-24 13:51:28 -07:00 · 2013-04-24 13:37:00 -07:00 · 2013-04-24 13:35:57 -07:00 · 2013-04-24 12:31:20 -07:00
201 changed files with 3985 additions and 13198 deletions
--- a/.mailmap
+++ b/.mailmap
@@ -2,7 +2,7 @@
 <charles.hooper@dotcloud.com> <chooper@plumata.com> 
 <daniel.mizyrycki@dotcloud.com> <daniel@dotcloud.com>
 <daniel.mizyrycki@dotcloud.com> <mzdaniel@glidelink.net>
-Guillaume J. Charmes <guillaume.charmes@dotcloud.com> <charmes.guillaume@gmail.com>
+Guillaume J. Charmes <guillaume.charmes@dotcloud.com> creack <charmes.guillaume@gmail.com>
 <guillaume.charmes@dotcloud.com> <guillaume@dotcloud.com>
 <kencochrane@gmail.com> <KenCochrane@gmail.com>
 <sridharr@activestate.com> <github@srid.name>
@@ -16,6 +16,4 @@ Tim Terhorst <mynamewastaken+git@gmail.com>
 Andy Smith <github@anarkystic.com>
 <kalessin@kalessin.fr> <louis@dotcloud.com>
 <victor.vieux@dotcloud.com> <victor@dotcloud.com>
-<victor.vieux@dotcloud.com> <dev@vvieux.com>
 <dominik@honnef.co> <dominikh@fork-bomb.org>
-Thatcher Peskens <thatcher@dotcloud.com>
--- a/21
+++ b/21
@@ -1,40 +1,24 @@
-# This file lists all individuals having contributed content to the repository.
-# If you're submitting a patch, please add your name here in alphabetical order as part of the patch.
-#
-# For a list of active project maintainers, see the MAINTAINERS file.
-#
-Al Tobey <al@ooyala.com>
-Alexey Shamrin <shamrin@gmail.com>
 Andrea Luzzardi <aluzzardi@gmail.com>
 Andy Rothfusz <github@metaliveblog.com>
 Andy Smith <github@anarkystic.com>
 Antony Messerli <amesserl@rackspace.com>
-Barry Allard <barry.allard@gmail.com>
-Brandon Liu <bdon@bdon.org>
 Brian McCallister <brianm@skife.org>
-Bruno Bigras <bigras.bruno@gmail.com>
 Caleb Spare <cespare@gmail.com>
 Charles Hooper <charles.hooper@dotcloud.com>
-Daniel Gasienica <daniel@gasienica.ch>
 Daniel Mizyrycki <daniel.mizyrycki@dotcloud.com>
 Daniel Robinson <gottagetmac@gmail.com>
-Daniel Von Fange <daniel@leancoder.com>
 Dominik Honnef <dominik@honnef.co>
 Don Spaulding <donspauldingii@gmail.com>
-Dr Nic Williams <drnicwilliams@gmail.com>
-Evan Wies <evan@neomantra.net>
 ezbercih <cem.ezberci@gmail.com>
 Flavio Castelli <fcastelli@suse.com>
 Francisco Souza <f@souza.cc>
 Frederick F. Kautz IV <fkautz@alumni.cmu.edu>
 Guillaume J. Charmes <guillaume.charmes@dotcloud.com>
-Harley Laue <losinggeneration@gmail.com>
 Hunter Blanks <hunter@twilio.com>
 Jeff Lindsay <progrium@gmail.com>
 Jeremy Grosser <jeremy@synack.me>
 Joffrey F <joffrey@dotcloud.com>
 John Costa <john.costa@gmail.com>
-Jonas Pfenniger <jonas@pfenniger.name>
 Jonathan Rudenberg <jonathan@titanous.com>
 Julien Barbier <write0@gmail.com>
 Jérôme Petazzoni <jerome.petazzoni@dotcloud.com>
@@ -43,11 +27,8 @@ Kevin J. Lynagh <kevin@keminglabs.com>
 Louis Opter <kalessin@kalessin.fr>
 Maxim Treskin <zerthurd@gmail.com>
 Mikhail Sobolev <mss@mawhrin.net>
-Nate Jones <nate@endot.org>
 Nelson Chen <crazysim@gmail.com>
 Niall O'Higgins <niallo@unworkable.org>
-odk- <github@odkurzacz.org>
-Paul Bowsher <pbowsher@globalpersonals.co.uk>
 Paul Hammond <paul@paulhammond.org>
 Piotr Bogdan <ppbogdan@gmail.com>
 Robert Obryk <robryk@gmail.com>
@@ -57,8 +38,6 @@ Silas Sewell <silas@sewell.org>
 Solomon Hykes <solomon@dotcloud.com>
 Sridhar Ratnakumar <sridharr@activestate.com>
 Thatcher Peskens <thatcher@dotcloud.com>
-Thomas Bikeev <thomas.bikeev@mac.com>
-Tianon Gravi <admwiggin@gmail.com>
 Tim Terhorst <mynamewastaken+git@gmail.com>
 Troy Howard <thoward37@gmail.com>
 unclejack <unclejacksons@gmail.com>
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -1,82 +1,6 @@
 # Changelog

-## 0.4.0 (2013-06-03)
- + Introducing Builder: 'docker build' builds a container, layer by layer, from a source repository containing a Dockerfile
- + Introducing Remote API: control Docker programmatically using a simple HTTP/json API
- * Runtime: various reliability and usability improvements
-
-## 0.3.4 (2013-05-30)
- + Builder: 'docker build' builds a container, layer by layer, from a source repository containing a Dockerfile
- + Builder: 'docker build -t FOO' applies the tag FOO to the newly built container.
- + Runtime: interactive TTYs correctly handle window resize
- * Runtime: fix how configuration is merged between layers
- + Remote API: split stdout and stderr on 'docker run'
- + Remote API: optionally listen on a different IP and port (use at your own risk)
- * Documentation: improved install instructions.
-
-## 0.3.3 (2013-05-23)
- - Registry: Fix push regression
- - Various bugfixes
-
-## 0.3.2 (2013-05-09)
- * Runtime: Store the actual archive on commit
- * Registry: Improve the checksum process
- * Registry: Use the size to have a good progress bar while pushing
- * Registry: Use the actual archive if it exists in order to speed up the push
- - Registry: Fix error 400 on push
-
-## 0.3.1 (2013-05-08)
- + Builder: Implement the autorun capability within docker builder
- + Builder: Add caching to docker builder
- + Builder: Add support for docker builder with native API as top level command
- + Runtime: Add go version to debug infos
- + Builder: Implement ENV within docker builder
- + Registry: Add docker search top level command in order to search a repository
- + Images: output graph of images to dot (graphviz)
- + Documentation: new introduction and high-level overview
- + Documentation: Add the documentation for docker builder
- + Website: new high-level overview
- - Makefile: Swap "go get" for "go get -d", especially to compile on go1.1rc
- - Images: fix ByParent function
- - Builder: Check the command existance prior create and add Unit tests for the case
- - Registry: Fix pull for official images with specific tag
- - Registry: Fix issue when login in with a different user and trying to push
- - Documentation: CSS fix for docker documentation to make REST API docs look better.
- - Documentation: Fixed CouchDB example page header mistake
- - Documentation: fixed README formatting
- * Registry: Improve checksum - async calculation
- * Runtime: kernel version - don't show the dash if flavor is empty
- * Documentation: updated www.docker.io website.
- * Builder: use any whitespaces instead of tabs
- * Packaging: packaging ubuntu; issue #510: Use goland-stable PPA package to build docker
-
-## 0.3.0 (2013-05-06)
- + Registry: Implement the new registry
- + Documentation: new example: sharing data between 2 couchdb databases
- - Runtime: Fix the command existance check
- - Runtime: strings.Split may return an empty string on no match
- - Runtime: Fix an index out of range crash if cgroup memory is not
- * Documentation: Various improvments
- * Vagrant: Use only one deb line in /etc/apt
-
-## 0.2.2 (2013-05-03)
- + Support for data volumes ('docker run -v=PATH')
- + Share data volumes between containers ('docker run -volumes-from')
- + Improved documentation
- * Upgrade to Go 1.0.3
- * Various upgrades to the dev environment for contributors
-
-## 0.2.1 (2013-05-01)
- + 'docker commit -run' bundles a layer with default runtime options: command, ports etc.
- * Improve install process on Vagrant
- + New Dockerfile operation: "maintainer"
- + New Dockerfile operation: "expose"
- + New Dockerfile operation: "cmd"
- + Contrib script to build a Debian base layer
- + 'docker -d -r': restart crashed containers at daemon startup
- * Runtime: improve test coverage
-
-## 0.2.0 (2013-04-23)
+## 0.2.0 (2012-04-23)
 - Runtime: ghost containers can be killed and waited for
 * Documentation: update install intructions
 - Packaging: fix Vagrantfile
@@ -84,12 +8,13 @@
 + Add a changelog
 - Various bugfixes

+
 ## 0.1.8 (2013-04-22)
 - Dynamically detect cgroup capabilities
 - Issue stability warning on kernels <3.8
 - 'docker push' buffers on disk instead of memory
 - Fix 'docker diff' for removed files
- - Fix 'docker stop' for ghost containers
+ - Fix 'docker stop' for ghost containers 
 - Fix handling of pidfile
 - Various bugfixes and stability improvements

@@ -110,7 +35,7 @@
 - Improve diagnosis of missing system capabilities
 - Allow disabling memory limits at compile time
 - Add debian packaging
- - Documentation: installing on Arch Linux
+ - Documentation: installing on Arch Linux 
 - Documentation: running Redis on docker
 - Fixed lxc 0.9 compatibility
 - Automatically load aufs module
--- a/CONTRIBUTING.md
+++ b/CONTRIBUTING.md
@@ -1,6 +1,9 @@
 # Contributing to Docker

-Want to hack on Docker? Awesome! Here are instructions to get you started. They are probably not perfect, please let us know if anything feels
+Want to hack on Docker? Awesome! There are instructions to get you
+started on the website: http://docker.io/gettingstarted.html
+
+They are probably not perfect, please let us know if anything feels
 wrong or incomplete.

 ## Contribution guidelines
@@ -88,73 +91,3 @@ Add your name to the AUTHORS file, but make sure the list is sorted and your
 name and email address match your git configuration. The AUTHORS file is
 regenerated occasionally from the git commit history, so a mismatch may result
 in your changes being overwritten.
-
-
-## Decision process
-
-### How are decisions made?
-
-Short answer: with pull requests to the docker repository.
-
-Docker is an open-source project with an open design philosophy. This means that the repository is the source of truth for EVERY aspect of the project,
-including its philosophy, design, roadmap and APIs. *If it's part of the project, it's in the repo. It's in the repo, it's part of the project.*
-
-As a result, all decisions can be expressed as changes to the repository. An implementation change is a change to the source code. An API change is a change to
-the API specification. A philosophy change is a change to the philosophy manifesto. And so on.
-
-All decisions affecting docker, big and small, follow the same 3 steps:
-
-* Step 1: Open a pull request. Anyone can do this.
-
-* Step 2: Discuss the pull request. Anyone can do this.
-
-* Step 3: Accept or refuse a pull request. The relevant maintainer does this (see below "Who decides what?")
-
-
-### Who decides what?
-
-So all decisions are pull requests, and the relevant maintainer makes the decision by accepting or refusing the pull request.
-But how do we identify the relevant maintainer for a given pull request?
-
-Docker follows the timeless, highly efficient and totally unfair system known as [Benevolent dictator for life](http://en.wikipedia.org/wiki/Benevolent_Dictator_for_Life),
-with yours truly, Solomon Hykes, in the role of BDFL.
-This means that all decisions are made by default by me. Since making every decision myself would be highly unscalable, in practice decisions are spread across multiple maintainers.
-
-The relevant maintainer for a pull request is assigned in 3 steps:
-
-* Step 1: Determine the subdirectory affected by the pull request. This might be src/registry, docs/source/api, or any other part of the repo.
-
-* Step 2: Find the MAINTAINERS file which affects this directory. If the directory itself does not have a MAINTAINERS file, work your way up the the repo hierarchy until you find one.
-
-* Step 3: The first maintainer listed is the primary maintainer. The pull request is assigned to him. He may assign it to other listed maintainers, at his discretion.
-
-
-### I'm a maintainer, should I make pull requests too?
-
-Primary maintainers are not required to create pull requests when changing their own subdirectory, but secondary maintainers are.
-
-### Who assigns maintainers?
-
-Solomon.
-
-### How can I become a maintainer?
-
-* Step 1: learn the component inside out
-* Step 2: make yourself useful by contributing code, bugfixes, support etc.
-* Step 3: volunteer on the irc channel (#docker@freenode)
-
-Don't forget: being a maintainer is a time investment. Make sure you will have time to make yourself available.
-You don't have to be a maintainer to make a difference on the project!
-
-### What are a maintainer's responsibility?
-
-It is every maintainer's responsibility to:
-
-* 1) Expose a clear roadmap for improving their component.
-* 2) Deliver prompt feedback and decisions on pull requests.
-* 3) Be available to anyone with questions, bug reports, criticism etc. on their component. This includes irc, github requests and the mailing list.
-* 4) Make sure their component respects the philosophy, design and roadmap of the project.
-
-### How is this process changed?
-
-Just like everything else: by making a pull request :)
--- a/5
+++ b/5
@@ -1,5 +0,0 @@
-Solomon Hykes <solomon@dotcloud.com>
-Guillaume Charmes <guillaume@dotcloud.com>
-Victor Vieux <victor@dotcloud.com>
-api.go: Victor Vieux <victor@dotcloud.com>
-Vagrantfile: Daniel Mizyrycki <daniel@dotcloud.com>
--- a/12
+++ b/12
@@ -38,15 +38,14 @@ $(DOCKER_BIN): $(DOCKER_DIR)

 $(DOCKER_DIR):
 	@mkdir -p $(dir $@)
-	@if [ -h $@ ]; then rm -f $@; fi; ln -sf $(CURDIR)/ $@
-	@(cd $(DOCKER_MAIN); go get -d $(GO_OPTIONS))
+	@rm -f $@
+	@ln -sf $(CURDIR)/ $@
+	@(cd $(DOCKER_MAIN); go get $(GO_OPTIONS))

 whichrelease:
 	echo $(RELEASE_VERSION)

 release: $(BINRELEASE)
-	s3cmd -P put $(BINRELEASE) s3://get.docker.io/builds/`uname -s`/`uname -m`/docker-$(RELEASE_VERSION).tgz
-
 srcrelease: $(SRCRELEASE)
 deps: $(DOCKER_DIR)

@@ -76,7 +75,4 @@ fmt:
 	@gofmt -s -l -w .

 hack:
-	cd $(CURDIR)/hack && vagrant up
-
-ssh-dev:
-	cd $(CURDIR)/hack && vagrant ssh
+	cd $(CURDIR)/buildbot && vagrant up
--- a/README.md
+++ b/README.md
@@ -1,94 +1,37 @@
-Docker: the Linux container engine
-==================================
+Docker: the Linux container runtime
+===================================

-Docker is an open-source engine which automates the deployment of applications as highly portable, self-sufficient containers.
+Docker complements LXC with a high-level API which operates at the process level. It runs unix processes with strong guarantees of isolation and repeatability across servers.

-Docker containers are both *hardware-agnostic* and *platform-agnostic*. This means that they can run anywhere, from your
-laptop to the largest EC2 compute instance and everything in between - and they don't require that you use a particular
-language, framework or packaging system. That makes them great building blocks for deploying and scaling web apps, databases
-and backend services without depending on a particular stack or provider.
+Docker is a great building block for automating distributed systems: large-scale web deployments, database clusters, continuous deployment systems, private PaaS, service-oriented architectures, etc.

-Docker is an open-source implementation of the deployment engine which powers [dotCloud](http://dotcloud.com), a popular Platform-as-a-Service.
-It benefits directly from the experience accumulated over several years of large-scale operation and support of hundreds of thousands
-of applications and databases.
+![Docker L](docs/sources/static_files/lego_docker.jpg "Docker")

-![Docker L](docs/sources/concepts/images/lego_docker.jpg "Docker")
+* *Heterogeneous payloads*: any combination of binaries, libraries, configuration files, scripts, virtualenvs, jars, gems, tarballs, you name it. No more juggling between domain-specific tools. Docker can deploy and run them all.

-## Better than VMs
+* *Any server*: docker can run on any x64 machine with a modern linux kernel - whether it's a laptop, a bare metal server or a VM. This makes it perfect for multi-cloud deployments.

-A common method for distributing applications and sandbox their execution is to use virtual machines, or VMs. Typical VM formats
-are VMWare's vmdk, Oracle Virtualbox's vdi, and Amazon EC2's ami. In theory these formats should allow every developer to
-automatically package their application into a "machine" for easy distribution and deployment. In practice, that almost never
-happens, for a few reasons:
+* *Isolation*: docker isolates processes from each other and from the underlying host, using lightweight containers.

-  * *Size*: VMs are very large which makes them impractical to store and transfer.
-  * *Performance*: running VMs consumes significant CPU and memory, which makes them impractical in many scenarios, for example local development of multi-tier applications, and
-  	large-scale deployment of cpu and memory-intensive applications on large numbers of machines.
-  * *Portability*: competing VM environments don't play well with each other. Although conversion tools do exist, they are limited and add even more overhead.
-  * *Hardware-centric*: VMs were designed with machine operators in mind, not software developers. As a result, they offer very limited tooling for what developers need most:
-  	building, testing and running their software. For example, VMs offer no facilities for application versioning, monitoring, configuration, logging or service discovery.
-
-By contrast, Docker relies on a different sandboxing method known as *containerization*. Unlike traditional virtualization,
-containerization takes place at the kernel level. Most modern operating system kernels now support the primitives necessary
-for containerization, including Linux with [openvz](http://openvz.org), [vserver](http://linux-vserver.org) and more recently [lxc](http://lxc.sourceforge.net),
-	Solaris with [zones](http://docs.oracle.com/cd/E26502_01/html/E29024/preface-1.html#scrolltoc) and FreeBSD with [Jails](http://www.freebsd.org/doc/handbook/jails.html).
-
-Docker builds on top of these low-level primitives to offer developers a portable format and runtime environment that solves
-all 4 problems. Docker containers are small (and their transfer can be optimized with layers), they have basically zero memory and cpu overhead,
-they are completely portable and are designed from the ground up with an application-centric design.
-
-The best part: because docker operates at the OS level, it can still be run inside a VM!
-
-## Plays well with others
-
-Docker does not require that you buy into a particular programming language, framework, packaging system or configuration language.
-
-Is your application a unix process? Does it use files, tcp connections, environment variables, standard unix streams and command-line
-arguments as inputs and outputs? Then docker can run it.
-
-Can your application's build be expressed as a sequence of such commands? Then docker can build it.
+* *Repeatability*: because containers are isolated in their own filesystem, they behave the same regardless of where, when, and alongside what they run.


-## Escape dependency hell
+Notable features
+-----------------

-A common problem for developers is the difficulty of managing all their application's dependencies in a simple and automated way.
+* Filesystem isolation: each process container runs in a completely separate root filesystem.

-This is usually difficult for several reasons:
+* Resource isolation: system resources like cpu and memory can be allocated differently to each process container, using cgroups.

-  * *Cross-platform dependencies*. Modern applications often depend on a combination of system libraries and binaries, language-specific packages, framework-specific modules,
-  	internal components developed for another project, etc. These dependencies live in different "worlds" and require different tools - these tools typically don't work
-	well with each other, requiring awkward custom integrations.
+* Network isolation: each process container runs in its own network namespace, with a virtual interface and IP address of its own.

-  * Conflicting dependencies. Different applications may depend on different versions of the same dependency. Packaging tools handle these situations with various degrees of ease -
-  	but they all handle them in different and incompatible ways, which again forces the developer to do extra work.
-  
-  * Custom dependencies. A developer may need to prepare a custom version of his application's dependency. Some packaging systems can handle custom versions of a dependency,
-  	others can't - and all of them handle it differently.
+* Copy-on-write: root filesystems are created using copy-on-write, which makes deployment extremely fast, memory-cheap and disk-cheap.

+* Logging: the standard streams (stdout/stderr/stdin) of each process container are collected and logged for real-time or batch retrieval.

-Docker solves dependency hell by giving the developer a simple way to express *all* his application's dependencies in one place,
-and streamline the process of assembling them. If this makes you think of [XKCD 927](http://xkcd.com/927/), don't worry. Docker doesn't
-*replace* your favorite packaging systems. It simply orchestrates their use in a simple and repeatable way. How does it do that? With layers.
-
-Docker defines a build as running a sequence of unix commands, one after the other, in the same container. Build commands modify the contents of the container
-(usually by installing new files on the filesystem), the next command modifies it some more, etc. Since each build command inherits the result of the previous
-commands, the *order* in which the commands are executed expresses *dependencies*.
-
-Here's a typical docker build process:
-
-```bash
-from ubuntu:12.10
-run apt-get update
-run DEBIAN_FRONTEND=noninteractive apt-get install -q -y python
-run DEBIAN_FRONTEND=noninteractive apt-get install -q -y python-pip
-run pip install django
-run DEBIAN_FRONTEND=noninteractive apt-get install -q -y curl
-run curl -L https://github.com/shykes/helloflask/archive/master.tar.gz | tar -xzv
-run cd helloflask-master && pip install -r requirements.txt
-```
-
-Note that Docker doesn't care *how* dependencies are built - as long as they can be built by running a unix command in a container.
+* Change management: changes to a container's filesystem can be committed into a new image and re-used to create more containers. No templating or manual configuration required.

+* Interactive shell: docker can allocate a pseudo-tty and attach to the standard input of any container, for example to run a throwaway interactive shell.

 Install instructions
 ==================
@@ -293,7 +236,7 @@ a format that is self-describing and portable, so that any compliant runtime can

 The spec for Standard Containers is currently a work in progress, but it is very straightforward. It mostly defines 1) an image format, 2) a set of standard operations, and 3) an execution environment.

-A great analogy for this is the shipping container. Just like how Standard Containers are a fundamental unit of software delivery, shipping containers (http://bricks.argz.com/ins/7823-1/12) are a fundamental unit of physical delivery.
+A great analogy for this is the shipping container. Just like Standard Containers are a fundamental unit of software delivery, shipping containers (http://bricks.argz.com/ins/7823-1/12) are a fundamental unit of physical delivery.

 ### 1. STANDARD OPERATIONS

@@ -321,7 +264,7 @@ Similarly, before Standard Containers, by the time a software component ran in p

 ### 5. INDUSTRIAL-GRADE DELIVERY

-There are 17 million shipping containers in existence, packed with every physical good imaginable. Every single one of them can be loaded onto the same boats, by the same cranes, in the same facilities, and sent anywhere in the World with incredible efficiency. It is embarrassing to think that a 30 ton shipment of coffee can safely travel half-way across the World in *less time* than it takes a software team to deliver its code from one datacenter to another sitting 10 miles away.
+There are 17 million shipping containers in existence, packed with every physical good imaginable. Every single one of them can be loaded on the same boats, by the same cranes, in the same facilities, and sent anywhere in the World with incredible efficiency. It is embarrassing to think that a 30 ton shipment of coffee can safely travel half-way across the World in *less time* than it takes a software team to deliver its code from one datacenter to another sitting 10 miles away.

 With Standard Containers we can put an end to that embarrassment, by making INDUSTRIAL-GRADE DELIVERY of software a reality.

--- a/SPECS/data-volumes.md
+++ b/SPECS/data-volumes.md
@@ -0,0 +1,71 @@
+
+## Spec for data volumes
+
+Spec owner: Solomon Hykes <solomon@dotcloud.com>
+
+Data volumes (issue #111) are a much-requested feature which trigger much discussion and debate. Below is the current authoritative spec for implementing data volumes.
+This spec will be deprecated once the feature is fully implemented.
+
+Discussion, requests, trolls, demands, offerings, threats and other forms of supplications concerning this spec should be addressed to Solomon here: https://github.com/dotcloud/docker/issues/111
+
+
+### 1. Creating data volumes
+
+At container creation, parts of a container's filesystem can be mounted as separate data volumes. Volumes are defined with the -v flag.
+
+For example:
+
+```bash
+$ docker run -v /var/lib/postgres -v /var/log postgres /usr/bin/postgres
+```
+
+In this example, a new container is created from the 'postgres' image. At the same time, docker creates 2 new data volumes: one will be mapped to the container at /var/lib/postgres, the other at /var/log.
+
+2 important notes:
+
+1) Volumes don't have top-level names. At no point does the user provide a name, or is a name given to him. Volumes are identified by the path at which they are mounted inside their container.
+
+2) The user doesn't choose the source of the volume. Docker only mounts volumes it created itself, in the same way that it only runs containers that it created itself. That is by design.
+
+
+### 2. Sharing data volumes
+
+Instead of creating its own volumes, a container can share another container's volumes. For example:
+
+```bash
+$ docker run --volumes-from $OTHER_CONTAINER_ID postgres /usr/local/bin/postgres-backup
+```
+
+In this example, a new container is created from the 'postgres' example. At the same time, docker will *re-use* the 2 data volumes created in the previous example. One volume will be mounted on the /var/lib/postgres of *both* containers, and the other will be mounted on the /var/log of both containers.
+
+### 3. Under the hood
+
+Docker stores volumes in /var/lib/docker/volumes. Each volume receives a globally unique ID at creation, and is stored at /var/lib/docker/volumes/ID.
+
+At creation, volumes are attached to a single container - the source of truth for this mapping will be the container's configuration.
+
+Mounting a volume consists of calling "mount --bind" from the volume's directory to the appropriate sub-directory of the container mountpoint. This may be done by Docker itself, or farmed out to lxc (which supports mount-binding) if possible.
+
+
+### 4. Backups, transfers and other volume operations
+
+Volumes sometimes need to be backed up, transfered between hosts, synchronized, etc. These operations typically are application-specific or site-specific, eg. rsync vs. S3 upload vs. replication vs...
+
+Rather than attempting to implement all these scenarios directly, Docker will allow for custom implementations using an extension mechanism.
+
+### 5. Custom volume handlers
+
+Docker allows for arbitrary code to be executed against a container's volumes, to implement any custom action: backup, transfer, synchronization across hosts, etc.
+
+Here's an example:
+
+```bash
+$ DB=$(docker run -d -v /var/lib/postgres -v /var/log postgres /usr/bin/postgres)
+
+$ BACKUP_JOB=$(docker run -d --volumes-from $DB shykes/backuper /usr/local/bin/backup-postgres --s3creds=$S3CREDS)
+
+$ docker wait $BACKUP_JOB
+```
+
+Congratulations, you just implemented a custom volume handler, using Docker's built-in ability to 1) execute arbitrary code and 2) share volumes between containers.
+
--- a/104
+++ b/104
@@ -1,62 +1,40 @@
 # -*- mode: ruby -*-
 # vi: set ft=ruby :

-BOX_NAME = ENV['BOX_NAME'] || "ubuntu"
-BOX_URI = ENV['BOX_URI'] || "http://files.vagrantup.com/precise64.box"
-AWS_REGION = ENV['AWS_REGION'] || "us-east-1"
-AWS_AMI    = ENV['AWS_AMI']    || "ami-d0f89fb9"
+def v10(config)
+  config.vm.box = 'precise64'
+  config.vm.box_url = 'http://files.vagrantup.com/precise64.box'

-Vagrant::Config.run do |config|
-  # Setup virtual machine box. This VM configuration code is always executed.
-  config.vm.box = BOX_NAME
-  config.vm.box_url = BOX_URI
-
-  # Provision docker and new kernel if deployment was not done
-  if Dir.glob("#{File.dirname(__FILE__)}/.vagrant/machines/default/*/id").empty?
-    # Add lxc-docker package
-    pkg_cmd = "apt-get update -qq; apt-get install -q -y python-software-properties; " \
-      "add-apt-repository -y ppa:dotcloud/lxc-docker; apt-get update -qq; " \
-      "apt-get install -q -y lxc-docker; "
-    # Add X.org Ubuntu backported 3.8 kernel
-    pkg_cmd << "add-apt-repository -y ppa:ubuntu-x-swat/r-lts-backport; " \
-      "apt-get update -qq; apt-get install -q -y linux-image-3.8.0-19-generic; "
-    # Add guest additions if local vbox VM
-    is_vbox = true
-    ARGV.each do |arg| is_vbox &&= !arg.downcase.start_with?("--provider") end
-    if is_vbox
-      pkg_cmd << "apt-get install -q -y linux-headers-3.8.0-19-generic dkms; " \
-        "echo 'Downloading VBox Guest Additions...'; " \
-        "wget -q http://dlc.sun.com.edgesuite.net/virtualbox/4.2.12/VBoxGuestAdditions_4.2.12.iso; "
-      # Prepare the VM to add guest additions after reboot
-      pkg_cmd << "echo -e 'mount -o loop,ro /home/vagrant/VBoxGuestAdditions_4.2.12.iso /mnt\n" \
-        "echo yes | /mnt/VBoxLinuxAdditions.run\numount /mnt\n" \
-          "rm /root/guest_additions.sh; ' > /root/guest_additions.sh; " \
-        "chmod 700 /root/guest_additions.sh; " \
-        "sed -i -E 's#^exit 0#[ -x /root/guest_additions.sh ] \\&\\& /root/guest_additions.sh#' /etc/rc.local; " \
-        "echo 'Installation of VBox Guest Additions is proceeding in the background.'; " \
-        "echo '\"vagrant reload\" can be used in about 2 minutes to activate the new guest additions.'; "
-    end
-    # Activate new kernel
-    pkg_cmd << "shutdown -r +1; "
-    config.vm.provision :shell, :inline => pkg_cmd
-  end
+  # Install ubuntu packaging dependencies and create ubuntu packages
+  config.vm.provision :shell, :inline => "echo 'deb http://ppa.launchpad.net/dotcloud/lxc-docker/ubuntu precise main' >>/etc/apt/sources.list"
+  config.vm.provision :shell, :inline => 'export DEBIAN_FRONTEND=noninteractive; apt-get -qq update; apt-get install -qq -y --force-yes lxc-docker'
 end

+Vagrant::VERSION < "1.1.0" and Vagrant::Config.run do |config|
+  v10(config)
+end
+
+Vagrant::VERSION >= "1.1.0" and Vagrant.configure("1") do |config|
+  v10(config)
+end

-# Providers were added on Vagrant >= 1.1.0
 Vagrant::VERSION >= "1.1.0" and Vagrant.configure("2") do |config|
-  config.vm.provider :aws do |aws, override|
+  config.vm.provider :aws do |aws|
+    config.vm.box = "dummy"
+    config.vm.box_url = "https://github.com/mitchellh/vagrant-aws/raw/master/dummy.box"
    aws.access_key_id = ENV["AWS_ACCESS_KEY_ID"]
-    aws.secret_access_key = ENV["AWS_SECRET_ACCESS_KEY"]
+    aws.secret_access_key =     ENV["AWS_SECRET_ACCESS_KEY"]
    aws.keypair_name = ENV["AWS_KEYPAIR_NAME"]
-    override.ssh.private_key_path = ENV["AWS_SSH_PRIVKEY"]
-    override.ssh.username = "ubuntu"
-    aws.region = AWS_REGION
-    aws.ami    = AWS_AMI
+    aws.ssh_private_key_path = ENV["AWS_SSH_PRIVKEY"]
+    aws.region = "us-east-1"
+    aws.ami = "ami-d0f89fb9"
+    aws.ssh_username = "ubuntu"
    aws.instance_type = "t1.micro"
  end

  config.vm.provider :rackspace do |rs|
+    config.vm.box = "dummy"
+    config.vm.box_url = "https://github.com/mitchellh/vagrant-rackspace/raw/master/dummy.box"
    config.ssh.private_key_path = ENV["RS_PRIVATE_KEY"]
    rs.username = ENV["RS_USERNAME"]
    rs.api_key  = ENV["RS_API_KEY"]
@@ -66,7 +44,39 @@ Vagrant::VERSION >= "1.1.0" and Vagrant.configure("2") do |config|
  end

  config.vm.provider :virtualbox do |vb|
-    config.vm.box = BOX_NAME
-    config.vm.box_url = BOX_URI
+    config.vm.box = 'precise64'
+    config.vm.box_url = 'http://files.vagrantup.com/precise64.box'
  end
 end
+
+Vagrant::VERSION >= "1.2.0" and Vagrant.configure("2") do |config|
+  config.vm.provider :aws do |aws, override|
+    config.vm.box = "dummy"
+    config.vm.box_url = "https://github.com/mitchellh/vagrant-aws/raw/master/dummy.box"
+    aws.access_key_id = ENV["AWS_ACCESS_KEY_ID"]
+    aws.secret_access_key = ENV["AWS_SECRET_ACCESS_KEY"]
+    aws.keypair_name = ENV["AWS_KEYPAIR_NAME"]
+    override.ssh.private_key_path = ENV["AWS_SSH_PRIVKEY"]
+    override.ssh.username = "ubuntu"
+    aws.region = "us-east-1"
+    aws.ami = "ami-d0f89fb9"
+    aws.instance_type = "t1.micro"
+  end
+
+  config.vm.provider :rackspace do |rs|
+    config.vm.box = "dummy"
+    config.vm.box_url = "https://github.com/mitchellh/vagrant-rackspace/raw/master/dummy.box"
+    config.ssh.private_key_path = ENV["RS_PRIVATE_KEY"]
+    rs.username = ENV["RS_USERNAME"]
+    rs.api_key  = ENV["RS_API_KEY"]
+    rs.public_key_path = ENV["RS_PUBLIC_KEY"]
+    rs.flavor   = /512MB/
+    rs.image    = /Ubuntu/
+  end
+
+  config.vm.provider :virtualbox do |vb|
+    config.vm.box = 'precise64'
+    config.vm.box_url = 'http://files.vagrantup.com/precise64.box'
+  end
+
+end
--- a/api.go
+++ b/api.go
@@ -1,785 +0,0 @@
-package docker
-
-import (
-	"encoding/json"
-	"fmt"
-	"github.com/dotcloud/docker/auth"
-	"github.com/dotcloud/docker/utils"
-	"github.com/gorilla/mux"
-	"io"
-	"log"
-	"net/http"
-	"strconv"
-	"strings"
-)
-
-const API_VERSION = 1.1
-
-func hijackServer(w http.ResponseWriter) (io.ReadCloser, io.Writer, error) {
-	conn, _, err := w.(http.Hijacker).Hijack()
-	if err != nil {
-		return nil, nil, err
-	}
-	// Flush the options to make sure the client sets the raw mode
-	conn.Write([]byte{})
-	return conn, conn, nil
-}
-
-//If we don't do this, POST method without Content-type (even with empty body) will fail
-func parseForm(r *http.Request) error {
-	if err := r.ParseForm(); err != nil && !strings.HasPrefix(err.Error(), "mime:") {
-		return err
-	}
-	return nil
-}
-
-func parseMultipartForm(r *http.Request) error {
-	if err := r.ParseMultipartForm(4096); err != nil && !strings.HasPrefix(err.Error(), "mime:") {
-		return err
-	}
-	return nil
-}
-
-func httpError(w http.ResponseWriter, err error) {
-	if strings.HasPrefix(err.Error(), "No such") {
-		http.Error(w, err.Error(), http.StatusNotFound)
-	} else if strings.HasPrefix(err.Error(), "Bad parameter") {
-		http.Error(w, err.Error(), http.StatusBadRequest)
-	} else if strings.HasPrefix(err.Error(), "Impossible") {
-		http.Error(w, err.Error(), http.StatusNotAcceptable)
-	} else {
-		http.Error(w, err.Error(), http.StatusInternalServerError)
-	}
-}
-
-func writeJson(w http.ResponseWriter, b []byte) {
-	w.Header().Set("Content-Type", "application/json")
-	w.Write(b)
-}
-
-// FIXME: Use stvconv.ParseBool() instead?
-func getBoolParam(value string) (bool, error) {
-	if value == "1" || strings.ToLower(value) == "true" {
-		return true, nil
-	}
-	if value == "" || value == "0" || strings.ToLower(value) == "false" {
-		return false, nil
-	}
-	return false, fmt.Errorf("Bad parameter")
-}
-
-func getAuth(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	// FIXME: Handle multiple login at once
-	// FIXME: return specific error code if config file missing?
-	authConfig, err := auth.LoadConfig(srv.runtime.root)
-	if err != nil {
-		if err != auth.ErrConfigFileMissing {
-			return err
-		}
-		authConfig = &auth.AuthConfig{}
-	}
-	b, err := json.Marshal(&auth.AuthConfig{Username: authConfig.Username, Email: authConfig.Email})
-	if err != nil {
-		return err
-	}
-	writeJson(w, b)
-	return nil
-}
-
-func postAuth(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	// FIXME: Handle multiple login at once
-	config := &auth.AuthConfig{}
-	if err := json.NewDecoder(r.Body).Decode(config); err != nil {
-		return err
-	}
-
-	authConfig, err := auth.LoadConfig(srv.runtime.root)
-	if err != nil {
-		if err != auth.ErrConfigFileMissing {
-			return err
-		}
-		authConfig = &auth.AuthConfig{}
-	}
-	if config.Username == authConfig.Username {
-		config.Password = authConfig.Password
-	}
-
-	newAuthConfig := auth.NewAuthConfig(config.Username, config.Password, config.Email, srv.runtime.root)
-	status, err := auth.Login(newAuthConfig)
-	if err != nil {
-		return err
-	}
-
-	if status != "" {
-		b, err := json.Marshal(&ApiAuth{Status: status})
-		if err != nil {
-			return err
-		}
-		writeJson(w, b)
-		return nil
-	}
-	w.WriteHeader(http.StatusNoContent)
-	return nil
-}
-
-func getVersion(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	m := srv.DockerVersion()
-	b, err := json.Marshal(m)
-	if err != nil {
-		return err
-	}
-	writeJson(w, b)
-	return nil
-}
-
-func postContainersKill(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-	if err := srv.ContainerKill(name); err != nil {
-		return err
-	}
-	w.WriteHeader(http.StatusNoContent)
-	return nil
-}
-
-func getContainersExport(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-
-	if err := srv.ContainerExport(name, w); err != nil {
-		utils.Debugf("%s", err.Error())
-		return err
-	}
-	return nil
-}
-
-func getImagesJson(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if err := parseForm(r); err != nil {
-		return err
-	}
-
-	all, err := getBoolParam(r.Form.Get("all"))
-	if err != nil {
-		return err
-	}
-	filter := r.Form.Get("filter")
-
-	outs, err := srv.Images(all, filter)
-	if err != nil {
-		return err
-	}
-	b, err := json.Marshal(outs)
-	if err != nil {
-		return err
-	}
-	writeJson(w, b)
-	return nil
-}
-
-func getImagesViz(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if err := srv.ImagesViz(w); err != nil {
-		return err
-	}
-	return nil
-}
-
-func getInfo(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	out := srv.DockerInfo()
-	b, err := json.Marshal(out)
-	if err != nil {
-		return err
-	}
-	writeJson(w, b)
-	return nil
-}
-
-func getImagesHistory(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-	outs, err := srv.ImageHistory(name)
-	if err != nil {
-		return err
-	}
-	b, err := json.Marshal(outs)
-	if err != nil {
-		return err
-	}
-	writeJson(w, b)
-	return nil
-}
-
-func getContainersChanges(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-	changesStr, err := srv.ContainerChanges(name)
-	if err != nil {
-		return err
-	}
-	b, err := json.Marshal(changesStr)
-	if err != nil {
-		return err
-	}
-	writeJson(w, b)
-	return nil
-}
-
-func getContainersJson(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if err := parseForm(r); err != nil {
-		return err
-	}
-	all, err := getBoolParam(r.Form.Get("all"))
-	if err != nil {
-		return err
-	}
-	since := r.Form.Get("since")
-	before := r.Form.Get("before")
-	n, err := strconv.Atoi(r.Form.Get("limit"))
-	if err != nil {
-		n = -1
-	}
-
-	outs := srv.Containers(all, n, since, before)
-	b, err := json.Marshal(outs)
-	if err != nil {
-		return err
-	}
-	writeJson(w, b)
-	return nil
-}
-
-func postImagesTag(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if err := parseForm(r); err != nil {
-		return err
-	}
-	repo := r.Form.Get("repo")
-	tag := r.Form.Get("tag")
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-	force, err := getBoolParam(r.Form.Get("force"))
-	if err != nil {
-		return err
-	}
-
-	if err := srv.ContainerTag(name, repo, tag, force); err != nil {
-		return err
-	}
-	w.WriteHeader(http.StatusCreated)
-	return nil
-}
-
-func postCommit(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if err := parseForm(r); err != nil {
-		return err
-	}
-	config := &Config{}
-	if err := json.NewDecoder(r.Body).Decode(config); err != nil {
-		utils.Debugf("%s", err.Error())
-	}
-	repo := r.Form.Get("repo")
-	tag := r.Form.Get("tag")
-	container := r.Form.Get("container")
-	author := r.Form.Get("author")
-	comment := r.Form.Get("comment")
-	id, err := srv.ContainerCommit(container, repo, tag, author, comment, config)
-	if err != nil {
-		return err
-	}
-	b, err := json.Marshal(&ApiId{id})
-	if err != nil {
-		return err
-	}
-	w.WriteHeader(http.StatusCreated)
-	writeJson(w, b)
-	return nil
-}
-
-// Creates an image from Pull or from Import
-func postImagesCreate(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if err := parseForm(r); err != nil {
-		return err
-	}
-
-	src := r.Form.Get("fromSrc")
-	image := r.Form.Get("fromImage")
-	tag := r.Form.Get("tag")
-	repo := r.Form.Get("repo")
-
-	if version > 1.0 {
-		w.Header().Set("Content-Type", "application/json")
-	}
-	sf := utils.NewStreamFormatter(version > 1.0)
-	if image != "" { //pull
-		registry := r.Form.Get("registry")
-		if err := srv.ImagePull(image, tag, registry, w, sf); err != nil {
-			if sf.Used() {
-				w.Write(sf.FormatError(err))
-				return nil
-			}
-			return err
-		}
-	} else { //import
-		if err := srv.ImageImport(src, repo, tag, r.Body, w, sf); err != nil {
-			if sf.Used() {
-				w.Write(sf.FormatError(err))
-				return nil
-			}
-			return err
-		}
-	}
-	return nil
-}
-
-func getImagesSearch(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if err := parseForm(r); err != nil {
-		return err
-	}
-
-	term := r.Form.Get("term")
-	outs, err := srv.ImagesSearch(term)
-	if err != nil {
-		return err
-	}
-	b, err := json.Marshal(outs)
-	if err != nil {
-		return err
-	}
-	writeJson(w, b)
-	return nil
-}
-
-func postImagesInsert(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if err := parseForm(r); err != nil {
-		return err
-	}
-
-	url := r.Form.Get("url")
-	path := r.Form.Get("path")
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-	if version > 1.0 {
-		w.Header().Set("Content-Type", "application/json")
-	}
-	sf := utils.NewStreamFormatter(version > 1.0)
-	imgId, err := srv.ImageInsert(name, url, path, w, sf)
-	if err != nil {
-		if sf.Used() {
-			w.Write(sf.FormatError(err))
-			return nil
-		}
-	}
-	b, err := json.Marshal(&ApiId{Id: imgId})
-	if err != nil {
-		return err
-	}
-	writeJson(w, b)
-	return nil
-}
-
-func postImagesPush(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if err := parseForm(r); err != nil {
-		return err
-	}
-	registry := r.Form.Get("registry")
-
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-	if version > 1.0 {
-		w.Header().Set("Content-Type", "application/json")
-	}
-	sf := utils.NewStreamFormatter(version > 1.0)
-	if err := srv.ImagePush(name, registry, w, sf); err != nil {
-		if sf.Used() {
-			w.Write(sf.FormatError(err))
-			return nil
-		}
-		return err
-	}
-	return nil
-}
-
-func postContainersCreate(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	config := &Config{}
-	if err := json.NewDecoder(r.Body).Decode(config); err != nil {
-		return err
-	}
-	id, err := srv.ContainerCreate(config)
-	if err != nil {
-		return err
-	}
-
-	out := &ApiRun{
-		Id: id,
-	}
-	if config.Memory > 0 && !srv.runtime.capabilities.MemoryLimit {
-		log.Println("WARNING: Your kernel does not support memory limit capabilities. Limitation discarded.")
-		out.Warnings = append(out.Warnings, "Your kernel does not support memory limit capabilities. Limitation discarded.")
-	}
-	if config.Memory > 0 && !srv.runtime.capabilities.SwapLimit {
-		log.Println("WARNING: Your kernel does not support swap limit capabilities. Limitation discarded.")
-		out.Warnings = append(out.Warnings, "Your kernel does not support memory swap capabilities. Limitation discarded.")
-	}
-	b, err := json.Marshal(out)
-	if err != nil {
-		return err
-	}
-	w.WriteHeader(http.StatusCreated)
-	writeJson(w, b)
-	return nil
-}
-
-func postContainersRestart(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if err := parseForm(r); err != nil {
-		return err
-	}
-	t, err := strconv.Atoi(r.Form.Get("t"))
-	if err != nil || t < 0 {
-		t = 10
-	}
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-	if err := srv.ContainerRestart(name, t); err != nil {
-		return err
-	}
-	w.WriteHeader(http.StatusNoContent)
-	return nil
-}
-
-func deleteContainers(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if err := parseForm(r); err != nil {
-		return err
-	}
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-	removeVolume, err := getBoolParam(r.Form.Get("v"))
-	if err != nil {
-		return err
-	}
-
-	if err := srv.ContainerDestroy(name, removeVolume); err != nil {
-		return err
-	}
-	w.WriteHeader(http.StatusNoContent)
-	return nil
-}
-
-func deleteImages(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-	if err := srv.ImageDelete(name); err != nil {
-		return err
-	}
-	w.WriteHeader(http.StatusNoContent)
-	return nil
-}
-
-func postContainersStart(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-	if err := srv.ContainerStart(name); err != nil {
-		return err
-	}
-	w.WriteHeader(http.StatusNoContent)
-	return nil
-}
-
-func postContainersStop(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if err := parseForm(r); err != nil {
-		return err
-	}
-	t, err := strconv.Atoi(r.Form.Get("t"))
-	if err != nil || t < 0 {
-		t = 10
-	}
-
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-
-	if err := srv.ContainerStop(name, t); err != nil {
-		return err
-	}
-	w.WriteHeader(http.StatusNoContent)
-	return nil
-}
-
-func postContainersWait(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-	status, err := srv.ContainerWait(name)
-	if err != nil {
-		return err
-	}
-	b, err := json.Marshal(&ApiWait{StatusCode: status})
-	if err != nil {
-		return err
-	}
-	writeJson(w, b)
-	return nil
-}
-
-func postContainersResize(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if err := parseForm(r); err != nil {
-		return err
-	}
-	height, err := strconv.Atoi(r.Form.Get("h"))
-	if err != nil {
-		return err
-	}
-	width, err := strconv.Atoi(r.Form.Get("w"))
-	if err != nil {
-		return err
-	}
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-	if err := srv.ContainerResize(name, height, width); err != nil {
-		return err
-	}
-	return nil
-}
-
-func postContainersAttach(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if err := parseForm(r); err != nil {
-		return err
-	}
-	logs, err := getBoolParam(r.Form.Get("logs"))
-	if err != nil {
-		return err
-	}
-	stream, err := getBoolParam(r.Form.Get("stream"))
-	if err != nil {
-		return err
-	}
-	stdin, err := getBoolParam(r.Form.Get("stdin"))
-	if err != nil {
-		return err
-	}
-	stdout, err := getBoolParam(r.Form.Get("stdout"))
-	if err != nil {
-		return err
-	}
-	stderr, err := getBoolParam(r.Form.Get("stderr"))
-	if err != nil {
-		return err
-	}
-
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-
-	if _, err := srv.ContainerInspect(name); err != nil {
-		return err
-	}
-
-	in, out, err := hijackServer(w)
-	if err != nil {
-		return err
-	}
-	defer in.Close()
-
-	fmt.Fprintf(out, "HTTP/1.1 200 OK\r\nContent-Type: application/vnd.docker.raw-stream\r\n\r\n")
-	if err := srv.ContainerAttach(name, logs, stream, stdin, stdout, stderr, in, out); err != nil {
-		fmt.Fprintf(out, "Error: %s\n", err)
-	}
-	return nil
-}
-
-func getContainersByName(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-
-	container, err := srv.ContainerInspect(name)
-	if err != nil {
-		return err
-	}
-	b, err := json.Marshal(container)
-	if err != nil {
-		return err
-	}
-	writeJson(w, b)
-	return nil
-}
-
-func getImagesByName(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if vars == nil {
-		return fmt.Errorf("Missing parameter")
-	}
-	name := vars["name"]
-
-	image, err := srv.ImageInspect(name)
-	if err != nil {
-		return err
-	}
-	b, err := json.Marshal(image)
-	if err != nil {
-		return err
-	}
-	writeJson(w, b)
-	return nil
-}
-
-func postImagesGetCache(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	apiConfig := &ApiImageConfig{}
-	if err := json.NewDecoder(r.Body).Decode(apiConfig); err != nil {
-		return err
-	}
-
-	image, err := srv.ImageGetCached(apiConfig.Id, apiConfig.Config)
-	if err != nil {
-		return err
-	}
-	if image == nil {
-		w.WriteHeader(http.StatusNotFound)
-		return nil
-	}
-	apiId := &ApiId{Id: image.Id}
-	b, err := json.Marshal(apiId)
-	if err != nil {
-		return err
-	}
-	writeJson(w, b)
-	return nil
-}
-
-func postBuild(srv *Server, version float64, w http.ResponseWriter, r *http.Request, vars map[string]string) error {
-	if err := r.ParseMultipartForm(4096); err != nil {
-		return err
-	}
-	remote := r.FormValue("t")
-	tag := ""
-	if strings.Contains(remote, ":") {
-		remoteParts := strings.Split(remote, ":")
-		tag = remoteParts[1]
-		remote = remoteParts[0]
-	}
-
-	dockerfile, _, err := r.FormFile("Dockerfile")
-	if err != nil {
-		return err
-	}
-
-	context, _, err := r.FormFile("Context")
-	if err != nil {
-		if err != http.ErrMissingFile {
-			return err
-		}
-	}
-
-	b := NewBuildFile(srv, utils.NewWriteFlusher(w))
-	if id, err := b.Build(dockerfile, context); err != nil {
-		fmt.Fprintf(w, "Error build: %s\n", err)
-	} else if remote != "" {
-		srv.runtime.repositories.Set(remote, tag, id, false)
-	}
-	return nil
-}
-
-func ListenAndServe(addr string, srv *Server, logging bool) error {
-	r := mux.NewRouter()
-	log.Printf("Listening for HTTP on %s\n", addr)
-
-	m := map[string]map[string]func(*Server, float64, http.ResponseWriter, *http.Request, map[string]string) error{
-		"GET": {
-			"/auth":                         getAuth,
-			"/version":                      getVersion,
-			"/info":                         getInfo,
-			"/images/json":                  getImagesJson,
-			"/images/viz":                   getImagesViz,
-			"/images/search":                getImagesSearch,
-			"/images/{name:.*}/history":     getImagesHistory,
-			"/images/{name:.*}/json":        getImagesByName,
-			"/containers/ps":                getContainersJson,
-			"/containers/json":              getContainersJson,
-			"/containers/{name:.*}/export":  getContainersExport,
-			"/containers/{name:.*}/changes": getContainersChanges,
-			"/containers/{name:.*}/json":    getContainersByName,
-		},
-		"POST": {
-			"/auth":                         postAuth,
-			"/commit":                       postCommit,
-			"/build":                        postBuild,
-			"/images/create":                postImagesCreate,
-			"/images/{name:.*}/insert":      postImagesInsert,
-			"/images/{name:.*}/push":        postImagesPush,
-			"/images/{name:.*}/tag":         postImagesTag,
-			"/images/getCache":              postImagesGetCache,
-			"/containers/create":            postContainersCreate,
-			"/containers/{name:.*}/kill":    postContainersKill,
-			"/containers/{name:.*}/restart": postContainersRestart,
-			"/containers/{name:.*}/start":   postContainersStart,
-			"/containers/{name:.*}/stop":    postContainersStop,
-			"/containers/{name:.*}/wait":    postContainersWait,
-			"/containers/{name:.*}/resize":  postContainersResize,
-			"/containers/{name:.*}/attach":  postContainersAttach,
-		},
-		"DELETE": {
-			"/containers/{name:.*}": deleteContainers,
-			"/images/{name:.*}":     deleteImages,
-		},
-	}
-
-	for method, routes := range m {
-		for route, fct := range routes {
-			utils.Debugf("Registering %s, %s", method, route)
-			// NOTE: scope issue, make sure the variables are local and won't be changed
-			localRoute := route
-			localMethod := method
-			localFct := fct
-			f := func(w http.ResponseWriter, r *http.Request) {
-				utils.Debugf("Calling %s %s", localMethod, localRoute)
-				if logging {
-					log.Println(r.Method, r.RequestURI)
-				}
-				if strings.Contains(r.Header.Get("User-Agent"), "Docker-Client/") {
-					userAgent := strings.Split(r.Header.Get("User-Agent"), "/")
-					if len(userAgent) == 2 && userAgent[1] != VERSION {
-						utils.Debugf("Warning: client and server don't have the same version (client: %s, server: %s)", userAgent[1], VERSION)
-					}
-				}
-				version, err := strconv.ParseFloat(mux.Vars(r)["version"], 64)
-				if err != nil {
-					version = API_VERSION
-				}
-				if version == 0 || version > API_VERSION {
-					w.WriteHeader(http.StatusNotFound)
-					return
-				}
-				if err := localFct(srv, version, w, r, mux.Vars(r)); err != nil {
-					httpError(w, err)
-				}
-			}
-			r.Path("/v{version:[0-9.]+}" + localRoute).Methods(localMethod).HandlerFunc(f)
-			r.Path(localRoute).Methods(localMethod).HandlerFunc(f)
-		}
-	}
-	return http.ListenAndServe(addr, r)
-}
--- a/api_params.go
+++ b/api_params.go
@@ -1,70 +0,0 @@
-package docker
-
-type ApiHistory struct {
-	Id        string
-	Created   int64
-	CreatedBy string `json:",omitempty"`
-}
-
-type ApiImages struct {
-	Repository string `json:",omitempty"`
-	Tag        string `json:",omitempty"`
-	Id         string
-	Created    int64
-}
-
-type ApiInfo struct {
-	Debug       bool
-	Containers  int
-	Images      int
-	NFd         int  `json:",omitempty"`
-	NGoroutines int  `json:",omitempty"`
-	MemoryLimit bool `json:",omitempty"`
-	SwapLimit   bool `json:",omitempty"`
-}
-
-type ApiContainers struct {
-	Id      string
-	Image   string
-	Command string
-	Created int64
-	Status  string
-	Ports   string
-}
-
-type ApiSearch struct {
-	Name        string
-	Description string
-}
-
-type ApiId struct {
-	Id string
-}
-
-type ApiRun struct {
-	Id       string
-	Warnings []string `json:",omitempty"`
-}
-
-type ApiPort struct {
-	Port string
-}
-
-type ApiVersion struct {
-	Version   string
-	GitCommit string `json:",omitempty"`
-	GoVersion string `json:",omitempty"`
-}
-
-type ApiWait struct {
-	StatusCode int
-}
-
-type ApiAuth struct {
-	Status string
-}
-
-type ApiImageConfig struct {
-	Id string
-	*Config
-}
--- a/api_test.go
+++ b/api_test.go
--- a/archive.go
+++ b/archive.go
@@ -2,7 +2,6 @@ package docker

 import (
 	"errors"
-	"fmt"
 	"io"
 	"io/ioutil"
 	"os"
@@ -32,20 +31,6 @@ func (compression *Compression) Flag() string {
 	return ""
 }

-func (compression *Compression) Extension() string {
-	switch *compression {
-	case Uncompressed:
-		return "tar"
-	case Bzip2:
-		return "tar.bz2"
-	case Gzip:
-		return "tar.gz"
-	case Xz:
-		return "tar.xz"
-	}
-	return ""
-}
-
 func Tar(path string, compression Compression) (io.Reader, error) {
 	cmd := exec.Command("bsdtar", "-f", "-", "-C", path, "-c"+compression.Flag(), ".")
 	return CmdStream(cmd)
@@ -54,12 +39,9 @@ func Tar(path string, compression Compression) (io.Reader, error) {
 func Untar(archive io.Reader, path string) error {
 	cmd := exec.Command("bsdtar", "-f", "-", "-C", path, "-x")
 	cmd.Stdin = archive
-	// Hardcode locale environment for predictable outcome regardless of host configuration.
-	//   (see https://github.com/dotcloud/docker/issues/355)
-	cmd.Env = []string{"LANG=en_US.utf-8", "LC_ALL=en_US.utf-8"}
 	output, err := cmd.CombinedOutput()
 	if err != nil {
-		return fmt.Errorf("%s: %s", err, output)
+		return errors.New(err.Error() + ": " + string(output))
 	}
 	return nil
 }
--- a/auth/MAINTAINERS
+++ b/auth/MAINTAINERS
@@ -1 +0,0 @@
-../registry/MAINTAINERS
--- a/auth/auth.go
+++ b/auth/auth.go
@@ -16,19 +16,13 @@ import (
 const CONFIGFILE = ".dockercfg"

 // the registry server we want to login against
-const INDEX_SERVER = "https://index.docker.io/v1"
-
-//const INDEX_SERVER = "http://indexstaging-docker.dotcloud.com/"
-
-var (
-	ErrConfigFileMissing error = errors.New("The Auth config file is missing")
-)
+const REGISTRY_SERVER = "https://registry.docker.io"

 type AuthConfig struct {
 	Username string `json:"username"`
 	Password string `json:"password"`
 	Email    string `json:"email"`
-	rootPath string
+	rootPath string `json:-`
 }

 func NewAuthConfig(username, password, email, rootPath string) *AuthConfig {
@@ -40,13 +34,6 @@ func NewAuthConfig(username, password, email, rootPath string) *AuthConfig {
 	}
 }

-func IndexServerAddress() string {
-	if os.Getenv("DOCKER_INDEX_URL") != "" {
-		return os.Getenv("DOCKER_INDEX_URL") + "/v1"
-	}
-	return INDEX_SERVER
-}
-
 // create a base64 encoded auth string to store in config
 func EncodeAuth(authConfig *AuthConfig) string {
 	authStr := authConfig.Username + ":" + authConfig.Password
@@ -82,16 +69,13 @@ func DecodeAuth(authStr string) (*AuthConfig, error) {
 func LoadConfig(rootPath string) (*AuthConfig, error) {
 	confFile := path.Join(rootPath, CONFIGFILE)
 	if _, err := os.Stat(confFile); err != nil {
-		return nil, ErrConfigFileMissing
+		return &AuthConfig{}, fmt.Errorf("The Auth config file is missing")
 	}
 	b, err := ioutil.ReadFile(confFile)
 	if err != nil {
 		return nil, err
 	}
 	arr := strings.Split(string(b), "\n")
-	if len(arr) < 2 {
-		return nil, fmt.Errorf("The Auth config file is empty")
-	}
 	origAuth := strings.Split(arr[0], " = ")
 	origEmail := strings.Split(arr[1], " = ")
 	authConfig, err := DecodeAuth(origAuth[1])
@@ -104,15 +88,10 @@ func LoadConfig(rootPath string) (*AuthConfig, error) {
 }

 // save the auth config
-func SaveConfig(rootPath, authStr string, email string) error {
-	confFile := path.Join(rootPath, CONFIGFILE)
-	if len(email) == 0 {
-		os.Remove(confFile)
-		return nil
-	}
+func saveConfig(rootPath, authStr string, email string) error {
 	lines := "auth = " + authStr + "\n" + "email = " + email + "\n"
 	b := []byte(lines)
-	err := ioutil.WriteFile(confFile, b, 0600)
+	err := ioutil.WriteFile(path.Join(rootPath, CONFIGFILE), b, 0600)
 	if err != nil {
 		return err
 	}
@@ -122,38 +101,40 @@ func SaveConfig(rootPath, authStr string, email string) error {
 // try to register/login to the registry server
 func Login(authConfig *AuthConfig) (string, error) {
 	storeConfig := false
-	client := &http.Client{}
 	reqStatusCode := 0
 	var status string
+	var errMsg string
 	var reqBody []byte
 	jsonBody, err := json.Marshal(authConfig)
 	if err != nil {
-		return "", fmt.Errorf("Config Error: %s", err)
+		errMsg = fmt.Sprintf("Config Error: %s", err)
+		return "", errors.New(errMsg)
 	}

 	// using `bytes.NewReader(jsonBody)` here causes the server to respond with a 411 status.
 	b := strings.NewReader(string(jsonBody))
-	req1, err := http.Post(IndexServerAddress()+"/users/", "application/json; charset=utf-8", b)
+	req1, err := http.Post(REGISTRY_SERVER+"/v1/users", "application/json; charset=utf-8", b)
 	if err != nil {
-		return "", fmt.Errorf("Server Error: %s", err)
+		errMsg = fmt.Sprintf("Server Error: %s", err)
+		return "", errors.New(errMsg)
 	}
+
 	reqStatusCode = req1.StatusCode
 	defer req1.Body.Close()
 	reqBody, err = ioutil.ReadAll(req1.Body)
 	if err != nil {
-		return "", fmt.Errorf("Server Error: [%#v] %s", reqStatusCode, err)
+		errMsg = fmt.Sprintf("Server Error: [%#v] %s", reqStatusCode, err)
+		return "", errors.New(errMsg)
 	}

 	if reqStatusCode == 201 {
-		status = "Account created. Please use the confirmation link we sent" +
-			" to your e-mail to activate it.\n"
+		status = "Account Created\n"
 		storeConfig = true
-	} else if reqStatusCode == 403 {
-		return "", fmt.Errorf("Login: Your account hasn't been activated. " +
-			"Please check your e-mail for a confirmation link.")
 	} else if reqStatusCode == 400 {
-		if string(reqBody) == "\"Username or email already exists\"" {
-			req, err := http.NewRequest("GET", IndexServerAddress()+"/users/", nil)
+		// FIXME: This should be 'exists', not 'exist'. Need to change on the server first.
+		if string(reqBody) == "Username or email already exist" {
+			client := &http.Client{}
+			req, err := http.NewRequest("GET", REGISTRY_SERVER+"/v1/users", nil)
 			req.SetBasicAuth(authConfig.Username, authConfig.Password)
 			resp, err := client.Do(req)
 			if err != nil {
@@ -167,26 +148,21 @@ func Login(authConfig *AuthConfig) (string, error) {
 			if resp.StatusCode == 200 {
 				status = "Login Succeeded\n"
 				storeConfig = true
-			} else if resp.StatusCode == 401 {
-				if err := SaveConfig(authConfig.rootPath, "", ""); err != nil {
-					return "", err
-				}
-				return "", fmt.Errorf("Wrong login/password, please try again")
 			} else {
-				return "", fmt.Errorf("Login: %s (Code: %d; Headers: %s)", body,
-					resp.StatusCode, resp.Header)
+				status = fmt.Sprintf("Login: %s", body)
+				return "", errors.New(status)
 			}
 		} else {
-			return "", fmt.Errorf("Registration: %s", reqBody)
+			status = fmt.Sprintf("Registration: %s", reqBody)
+			return "", errors.New(status)
 		}
 	} else {
-		return "", fmt.Errorf("Unexpected status code [%d] : %s", reqStatusCode, reqBody)
+		status = fmt.Sprintf("[%s] : %s", reqStatusCode, reqBody)
+		return "", errors.New(status)
 	}
 	if storeConfig {
 		authStr := EncodeAuth(authConfig)
-		if err := SaveConfig(authConfig.rootPath, authStr, authConfig.Email); err != nil {
-			return "", err
-		}
+		saveConfig(authConfig.rootPath, authStr, authConfig.Email)
 	}
 	return status, nil
 }
--- a/auth/auth_test.go
+++ b/auth/auth_test.go
@@ -1,10 +1,6 @@
 package auth

 import (
-	"crypto/rand"
-	"encoding/hex"
-	"os"
-	"strings"
 	"testing"
 )

@@ -25,49 +21,3 @@ func TestEncodeAuth(t *testing.T) {
 		t.Fatal("AuthString encoding isn't correct.")
 	}
 }
-
-func TestLogin(t *testing.T) {
-	os.Setenv("DOCKER_INDEX_URL", "https://indexstaging-docker.dotcloud.com")
-	defer os.Setenv("DOCKER_INDEX_URL", "")
-	authConfig := NewAuthConfig("unittester", "surlautrerivejetattendrai", "noise+unittester@dotcloud.com", "/tmp")
-	status, err := Login(authConfig)
-	if err != nil {
-		t.Fatal(err)
-	}
-	if status != "Login Succeeded\n" {
-		t.Fatalf("Expected status \"Login Succeeded\", found \"%s\" instead", status)
-	}
-}
-
-func TestCreateAccount(t *testing.T) {
-	os.Setenv("DOCKER_INDEX_URL", "https://indexstaging-docker.dotcloud.com")
-	defer os.Setenv("DOCKER_INDEX_URL", "")
-	tokenBuffer := make([]byte, 16)
-	_, err := rand.Read(tokenBuffer)
-	if err != nil {
-		t.Fatal(err)
-	}
-	token := hex.EncodeToString(tokenBuffer)[:12]
-	username := "ut" + token
-	authConfig := NewAuthConfig(username, "test42", "docker-ut+"+token+"@example.com", "/tmp")
-	status, err := Login(authConfig)
-	if err != nil {
-		t.Fatal(err)
-	}
-	expectedStatus := "Account created. Please use the confirmation link we sent" +
-		" to your e-mail to activate it.\n"
-	if status != expectedStatus {
-		t.Fatalf("Expected status: \"%s\", found \"%s\" instead.", expectedStatus, status)
-	}
-
-	status, err = Login(authConfig)
-	if err == nil {
-		t.Fatalf("Expected error but found nil instead")
-	}
-
-	expectedError := "Login: Account is not Active"
-
-	if !strings.Contains(err.Error(), expectedError) {
-		t.Fatalf("Expected message \"%s\" but found \"%s\" instead", expectedError, err.Error())
-	}
-}
--- a/buildbot/README.rst
+++ b/buildbot/README.rst
@@ -1,19 +1,5 @@
-This directory contains material helpful for hacking on docker.
-
-make hack
-=========
-
-Set up an Ubuntu 13.04 virtual machine for developers including kernel 3.8
-and buildbot. The environment is setup in a way that can be used through
-the usual go workflow and/or the root Makefile. You can either edit on
-your host, or inside the VM (using make ssh-dev) and run and test docker
-inside the VM.
-
-dependencies: vagrant, virtualbox packages and python package requests
-
-
 Buildbot
-~~~~~~~~
+========

 Buildbot is a continuous integration system designed to automate the
 build/test cycle. By automatically rebuilding and testing the tree each time
@@ -25,3 +11,10 @@ machine in the background running a buildbot instance and adds a git
 post-commit hook that automatically run docker tests for you.

 You can check your buildbot instance at http://192.168.33.21:8010/waterfall
+
+
+Buildbot dependencies
+---------------------
+
+vagrant, virtualbox packages and python package requests
+
--- a/buildbot/Vagrantfile
+++ b/buildbot/Vagrantfile
@@ -0,0 +1,28 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+$BUILDBOT_IP = '192.168.33.21'
+
+def v10(config)
+  config.vm.box = "quantal64_3.5.0-25"
+  config.vm.box_url = "http://get.docker.io/vbox/ubuntu/12.10/quantal64_3.5.0-25.box"
+  config.vm.share_folder 'v-data', '/data/docker', File.dirname(__FILE__) + '/..'
+  config.vm.network :hostonly, $BUILDBOT_IP
+
+  # Ensure puppet is installed on the instance
+  config.vm.provision :shell, :inline => 'apt-get -qq update; apt-get install -y puppet'
+
+  config.vm.provision :puppet do |puppet|
+    puppet.manifests_path = '.'
+    puppet.manifest_file  = 'buildbot.pp'
+    puppet.options = ['--templatedir','.']
+  end
+end
+
+Vagrant::VERSION < '1.1.0' and Vagrant::Config.run do |config|
+  v10(config)
+end
+
+Vagrant::VERSION >= '1.1.0' and Vagrant.configure('1') do |config|
+  v10(config)
+end
--- a/buildbot/buildbot-cfg/buildbot-cfg.sh
+++ b/buildbot/buildbot-cfg/buildbot-cfg.sh
@@ -0,0 +1,43 @@
+#!/bin/bash
+
+# Auto setup of buildbot configuration. Package installation is being done
+# on buildbot.pp
+# Dependencies: buildbot, buildbot-slave, supervisor
+
+SLAVE_NAME='buildworker'
+SLAVE_SOCKET='localhost:9989'
+BUILDBOT_PWD='pass-docker'
+USER='vagrant'
+ROOT_PATH='/data/buildbot'
+DOCKER_PATH='/data/docker'
+BUILDBOT_CFG="$DOCKER_PATH/buildbot/buildbot-cfg"
+IP=$(grep BUILDBOT_IP /data/docker/buildbot/Vagrantfile | awk -F "'" '{ print $2; }')
+
+function run { su $USER -c "$1"; }
+
+export PATH=/bin:sbin:/usr/bin:/usr/sbin:/usr/local/bin
+
+# Exit if buildbot has already been installed
+[ -d "$ROOT_PATH" ] && exit 0
+
+# Setup buildbot
+run "mkdir -p ${ROOT_PATH}"
+cd ${ROOT_PATH}
+run "buildbot create-master master"
+run "cp $BUILDBOT_CFG/master.cfg master"
+run "sed -i 's/localhost/$IP/' master/master.cfg"
+run "buildslave create-slave slave $SLAVE_SOCKET $SLAVE_NAME $BUILDBOT_PWD"
+
+# Allow buildbot subprocesses (docker tests) to properly run in containers,
+# in particular with docker -u
+run "sed -i 's/^umask = None/umask = 000/' ${ROOT_PATH}/slave/buildbot.tac"
+
+# Setup supervisor
+cp $BUILDBOT_CFG/buildbot.conf /etc/supervisor/conf.d/buildbot.conf
+sed -i "s/^chmod=0700.*0700./chmod=0770\nchown=root:$USER/" /etc/supervisor/supervisord.conf
+kill -HUP `pgrep -f "/usr/bin/python /usr/bin/supervisord"`
+
+# Add git hook
+cp $BUILDBOT_CFG/post-commit $DOCKER_PATH/.git/hooks
+sed -i "s/localhost/$IP/" $DOCKER_PATH/.git/hooks/post-commit
+
--- a/buildbot/buildbot-cfg/buildbot.conf
+++ b/buildbot/buildbot-cfg/buildbot.conf
--- a/buildbot/buildbot-cfg/master.cfg
+++ b/buildbot/buildbot-cfg/master.cfg
@@ -13,8 +13,8 @@ TEST_USER = 'buildbot'  # Credential to authenticate build triggers
 TEST_PWD = 'docker'     # Credential to authenticate build triggers
 BUILDER_NAME = 'docker'
 BUILDPASSWORD = 'pass-docker'  # Credential to authenticate buildworkers
-GOPATH = '/data/docker'
-DOCKER_PATH = '{0}/src/github.com/dotcloud/docker'.format(GOPATH)
+DOCKER_PATH = '/data/docker'
+

 c = BuildmasterConfig = {}

@@ -28,7 +28,10 @@ c['slavePortnum'] = PORT_MASTER
 c['schedulers'] = [ForceScheduler(name='trigger',builderNames=[BUILDER_NAME])]

 # Docker test command
-test_cmd = "GOPATH={0} make -C {1} test".format(GOPATH,DOCKER_PATH)
+test_cmd = """(
+    cd {0}/..; rm -rf docker-tmp; git clone docker docker-tmp;
+    cd docker-tmp; make test; exit_status=$?;
+    cd ..; rm -rf docker-tmp; exit $exit_status)""".format(DOCKER_PATH)

 # Builder
 factory = BuildFactory()
--- a/buildbot/buildbot-cfg/post-commit
+++ b/buildbot/buildbot-cfg/post-commit
--- a/buildbot/buildbot.pp
+++ b/buildbot/buildbot.pp
@@ -0,0 +1,32 @@
+node default {
+    $USER = 'vagrant'
+    $ROOT_PATH = '/data/buildbot'
+    $DOCKER_PATH = '/data/docker'
+
+    exec {'apt_update': command => '/usr/bin/apt-get update' }
+    Package { require => Exec['apt_update'] }
+    group {'puppet': ensure => 'present'}
+
+    # Install dependencies
+    Package { ensure => 'installed' }
+    package { ['python-dev','python-pip','supervisor','lxc','bsdtar','git','golang']: }
+
+    file{[ '/data' ]:
+        owner => $USER, group => $USER, ensure => 'directory' }
+
+    file {'/var/tmp/requirements.txt':
+        content => template('requirements.txt') }
+
+    exec {'requirements':
+        require => [ Package['python-dev'], Package['python-pip'],
+            File['/var/tmp/requirements.txt'] ],
+        cwd     => '/var/tmp',
+        command => "/bin/sh -c '(/usr/bin/pip install -r requirements.txt;
+            rm /var/tmp/requirements.txt)'" }
+
+    exec {'buildbot-cfg-sh':
+        require => [ Package['supervisor'], Exec['requirements']],
+        path    => '/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin',
+        cwd     => '/data',
+        command => "$DOCKER_PATH/buildbot/buildbot-cfg/buildbot-cfg.sh" }
+}
--- a/hack/environment/requirements.txt
+++ b/hack/environment/requirements.txt
--- a/builder.go
+++ b/builder.go
@@ -1,118 +1,169 @@
 package docker

 import (
+	"bufio"
 	"fmt"
-	"os"
-	"path"
-	"time"
+	"io"
+	"strings"
 )

 type Builder struct {
-	runtime      *Runtime
-	repositories *TagStore
-	graph        *Graph
-
-	config *Config
-	image  *Image
+	runtime *Runtime
 }

 func NewBuilder(runtime *Runtime) *Builder {
 	return &Builder{
-		runtime:      runtime,
-		graph:        runtime.graph,
-		repositories: runtime.repositories,
+		runtime: runtime,
 	}
 }

-func (builder *Builder) Create(config *Config) (*Container, error) {
-	// Lookup image
-	img, err := builder.repositories.LookupImage(config.Image)
+func (builder *Builder) Run(image *Image, cmd ...string) (*Container, error) {
+	// FIXME: pass a NopWriter instead of nil
+	config, err := ParseRun(append([]string{"-d", image.Id}, cmd...), nil, builder.runtime.capabilities)
+	if config.Image == "" {
+		return nil, fmt.Errorf("Image not specified")
+	}
+	if len(config.Cmd) == 0 {
+		return nil, fmt.Errorf("Command not specified")
+	}
+	if config.Tty {
+		return nil, fmt.Errorf("The tty mode is not supported within the builder")
+	}
+
+	// Create new container
+	container, err := builder.runtime.Create(config)
 	if err != nil {
 		return nil, err
 	}
-
-	if img.Config != nil {
-		MergeConfig(config, img.Config)
-	}
-
-	if config.Cmd == nil || len(config.Cmd) == 0 {
-		return nil, fmt.Errorf("No command specified")
-	}
-
-	// Generate id
-	id := GenerateId()
-	// Generate default hostname
-	// FIXME: the lxc template no longer needs to set a default hostname
-	if config.Hostname == "" {
-		config.Hostname = id[:12]
-	}
-
-	container := &Container{
-		// FIXME: we should generate the ID here instead of receiving it as an argument
-		Id:              id,
-		Created:         time.Now(),
-		Path:            config.Cmd[0],
-		Args:            config.Cmd[1:], //FIXME: de-duplicate from config
-		Config:          config,
-		Image:           img.Id, // Always use the resolved image id
-		NetworkSettings: &NetworkSettings{},
-		// FIXME: do we need to store this in the container?
-		SysInitPath: sysInitPath,
-	}
-	container.root = builder.runtime.containerRoot(container.Id)
-	// Step 1: create the container directory.
-	// This doubles as a barrier to avoid race conditions.
-	if err := os.Mkdir(container.root, 0700); err != nil {
-		return nil, err
-	}
-
-	// If custom dns exists, then create a resolv.conf for the container
-	if len(config.Dns) > 0 {
-		container.ResolvConfPath = path.Join(container.root, "resolv.conf")
-		f, err := os.Create(container.ResolvConfPath)
-		if err != nil {
-			return nil, err
-		}
-		defer f.Close()
-		for _, dns := range config.Dns {
-			if _, err := f.Write([]byte("nameserver " + dns + "\n")); err != nil {
-				return nil, err
-			}
-		}
-	} else {
-		container.ResolvConfPath = "/etc/resolv.conf"
-	}
-
-	// Step 2: save the container json
-	if err := container.ToDisk(); err != nil {
-		return nil, err
-	}
-	// Step 3: register the container
-	if err := builder.runtime.Register(container); err != nil {
+	if err := container.Start(); err != nil {
 		return nil, err
 	}
 	return container, nil
 }

-// Commit creates a new filesystem image from the current state of a container.
-// The image can optionally be tagged into a repository
-func (builder *Builder) Commit(container *Container, repository, tag, comment, author string, config *Config) (*Image, error) {
-	// FIXME: freeze the container before copying it to avoid data corruption?
-	// FIXME: this shouldn't be in commands.
-	rwTar, err := container.ExportRw()
-	if err != nil {
-		return nil, err
+func (builder *Builder) Commit(container *Container, repository, tag, comment, author string) (*Image, error) {
+	return builder.runtime.Commit(container.Id, repository, tag, comment, author)
+}
+
+func (builder *Builder) clearTmp(containers, images map[string]struct{}) {
+	for c := range containers {
+		tmp := builder.runtime.Get(c)
+		builder.runtime.Destroy(tmp)
+		Debugf("Removing container %s", c)
 	}
-	// Create a new image from the container's base layers + a new layer from container changes
-	img, err := builder.graph.Create(rwTar, container, comment, author, config)
-	if err != nil {
-		return nil, err
+	for i := range images {
+		builder.runtime.graph.Delete(i)
+		Debugf("Removing image %s", i)
 	}
-	// Register the image if needed
-	if repository != "" {
-		if err := builder.repositories.Set(repository, tag, img.Id, true); err != nil {
-			return img, err
+}
+
+func (builder *Builder) Build(dockerfile io.Reader, stdout io.Writer) error {
+	var (
+		image, base   *Image
+		tmpContainers map[string]struct{} = make(map[string]struct{})
+		tmpImages     map[string]struct{} = make(map[string]struct{})
+	)
+	defer builder.clearTmp(tmpContainers, tmpImages)
+
+	file := bufio.NewReader(dockerfile)
+	for {
+		line, err := file.ReadString('\n')
+		if err != nil {
+			if err == io.EOF {
+				break
+			}
+			return err
+		}
+		line = strings.TrimSpace(line)
+		// Skip comments and empty line
+		if len(line) == 0 || line[0] == '#' {
+			continue
+		}
+		tmp := strings.SplitN(line, "	", 2)
+		if len(tmp) != 2 {
+			return fmt.Errorf("Invalid Dockerfile format")
+		}
+		switch tmp[0] {
+		case "from":
+			fmt.Fprintf(stdout, "FROM %s\n", tmp[1])
+			image, err = builder.runtime.repositories.LookupImage(tmp[1])
+			if err != nil {
+				return err
+			}
+			break
+		case "run":
+			fmt.Fprintf(stdout, "RUN %s\n", tmp[1])
+			if image == nil {
+				return fmt.Errorf("Please provide a source image with `from` prior to run")
+			}
+
+			// Create the container and start it
+			c, err := builder.Run(image, "/bin/sh", "-c", tmp[1])
+			if err != nil {
+				return err
+			}
+			tmpContainers[c.Id] = struct{}{}
+
+			// Wait for it to finish
+			if result := c.Wait(); result != 0 {
+				return fmt.Errorf("!!! '%s' return non-zero exit code '%d'. Aborting.", tmp[1], result)
+			}
+
+			// Commit the container
+			base, err = builder.Commit(c, "", "", "", "")
+			if err != nil {
+				return err
+			}
+			tmpImages[base.Id] = struct{}{}
+
+			fmt.Fprintf(stdout, "===> %s\n", base.ShortId())
+			break
+		case "copy":
+			if image == nil {
+				return fmt.Errorf("Please provide a source image with `from` prior to copy")
+			}
+			tmp2 := strings.SplitN(tmp[1], " ", 2)
+			if len(tmp) != 2 {
+				return fmt.Errorf("Invalid COPY format")
+			}
+			fmt.Fprintf(stdout, "COPY %s to %s in %s\n", tmp2[0], tmp2[1], base.ShortId())
+
+			file, err := Download(tmp2[0], stdout)
+			if err != nil {
+				return err
+			}
+			defer file.Body.Close()
+
+			c, err := builder.Run(base, "echo", "insert", tmp2[0], tmp2[1])
+			if err != nil {
+				return err
+			}
+
+			if err := c.Inject(file.Body, tmp2[1]); err != nil {
+				return err
+			}
+
+			base, err = builder.Commit(c, "", "", "", "")
+			if err != nil {
+				return err
+			}
+			fmt.Fprintf(stdout, "===> %s\n", base.ShortId())
+			break
+		default:
+			fmt.Fprintf(stdout, "Skipping unknown op %s\n", tmp[0])
 		}
 	}
-	return img, nil
+	if base != nil {
+		// The build is successful, keep the temporary containers and images
+		for i := range tmpImages {
+			delete(tmpImages, i)
+		}
+		for i := range tmpContainers {
+			delete(tmpContainers, i)
+		}
+		fmt.Fprintf(stdout, "Build finished. image id: %s\n", base.ShortId())
+	} else {
+		fmt.Fprintf(stdout, "An error occured during the build\n")
+	}
+	return nil
 }
--- a/builder_client.go
+++ b/builder_client.go
@@ -1,314 +0,0 @@
-package docker
-
-import (
-	"bufio"
-	"encoding/json"
-	"fmt"
-	"github.com/dotcloud/docker/utils"
-	"io"
-	"net/url"
-	"os"
-	"reflect"
-	"strings"
-)
-
-type builderClient struct {
-	cli *DockerCli
-
-	image      string
-	maintainer string
-	config     *Config
-
-	tmpContainers map[string]struct{}
-	tmpImages     map[string]struct{}
-
-	needCommit bool
-}
-
-func (b *builderClient) clearTmp(containers, images map[string]struct{}) {
-	for i := range images {
-		if _, _, err := b.cli.call("DELETE", "/images/"+i, nil); err != nil {
-			utils.Debugf("%s", err)
-		}
-		utils.Debugf("Removing image %s", i)
-	}
-}
-
-func (b *builderClient) CmdFrom(name string) error {
-	obj, statusCode, err := b.cli.call("GET", "/images/"+name+"/json", nil)
-	if statusCode == 404 {
-
-		remote := name
-		var tag string
-		if strings.Contains(remote, ":") {
-			remoteParts := strings.Split(remote, ":")
-			tag = remoteParts[1]
-			remote = remoteParts[0]
-		}
-		var out io.Writer
-		if os.Getenv("DEBUG") != "" {
-			out = os.Stdout
-		} else {
-			out = &utils.NopWriter{}
-		}
-		if err := b.cli.stream("POST", "/images/create?fromImage="+remote+"&tag="+tag, nil, out); err != nil {
-			return err
-		}
-		obj, _, err = b.cli.call("GET", "/images/"+name+"/json", nil)
-		if err != nil {
-			return err
-		}
-	}
-	if err != nil {
-		return err
-	}
-
-	img := &ApiId{}
-	if err := json.Unmarshal(obj, img); err != nil {
-		return err
-	}
-	b.image = img.Id
-	utils.Debugf("Using image %s", b.image)
-	return nil
-}
-
-func (b *builderClient) CmdMaintainer(name string) error {
-	b.needCommit = true
-	b.maintainer = name
-	return nil
-}
-
-func (b *builderClient) CmdRun(args string) error {
-	if b.image == "" {
-		return fmt.Errorf("Please provide a source image with `from` prior to run")
-	}
-	config, _, err := ParseRun([]string{b.image, "/bin/sh", "-c", args}, nil)
-	if err != nil {
-		return err
-	}
-
-	cmd, env := b.config.Cmd, b.config.Env
-	b.config.Cmd = nil
-	MergeConfig(b.config, config)
-
-	body, statusCode, err := b.cli.call("POST", "/images/getCache", &ApiImageConfig{Id: b.image, Config: b.config})
-	if err != nil {
-		if statusCode != 404 {
-			return err
-		}
-	}
-	if statusCode != 404 {
-		apiId := &ApiId{}
-		if err := json.Unmarshal(body, apiId); err != nil {
-			return err
-		}
-		utils.Debugf("Use cached version")
-		b.image = apiId.Id
-		return nil
-	}
-	cid, err := b.run()
-	if err != nil {
-		return err
-	}
-	b.config.Cmd, b.config.Env = cmd, env
-	return b.commit(cid)
-}
-
-func (b *builderClient) CmdEnv(args string) error {
-	b.needCommit = true
-	tmp := strings.SplitN(args, " ", 2)
-	if len(tmp) != 2 {
-		return fmt.Errorf("Invalid ENV format")
-	}
-	key := strings.Trim(tmp[0], " ")
-	value := strings.Trim(tmp[1], " ")
-
-	for i, elem := range b.config.Env {
-		if strings.HasPrefix(elem, key+"=") {
-			b.config.Env[i] = key + "=" + value
-			return nil
-		}
-	}
-	b.config.Env = append(b.config.Env, key+"="+value)
-	return nil
-}
-
-func (b *builderClient) CmdCmd(args string) error {
-	b.needCommit = true
-	var cmd []string
-	if err := json.Unmarshal([]byte(args), &cmd); err != nil {
-		utils.Debugf("Error unmarshalling: %s, using /bin/sh -c", err)
-		b.config.Cmd = []string{"/bin/sh", "-c", args}
-	} else {
-		b.config.Cmd = cmd
-	}
-	return nil
-}
-
-func (b *builderClient) CmdExpose(args string) error {
-	ports := strings.Split(args, " ")
-	b.config.PortSpecs = append(ports, b.config.PortSpecs...)
-	return nil
-}
-
-func (b *builderClient) CmdInsert(args string) error {
-	// tmp := strings.SplitN(args, "\t ", 2)
-	// sourceUrl, destPath := tmp[0], tmp[1]
-
-	// v := url.Values{}
-	// v.Set("url", sourceUrl)
-	// v.Set("path", destPath)
-	// body, _, err := b.cli.call("POST", "/images/insert?"+v.Encode(), nil)
-	// if err != nil {
-	// 	return err
-	// }
-
-	// apiId := &ApiId{}
-	// if err := json.Unmarshal(body, apiId); err != nil {
-	// 	return err
-	// }
-
-	// FIXME: Reimplement this, we need to retrieve the resulting Id
-	return fmt.Errorf("INSERT not implemented")
-}
-
-func (b *builderClient) run() (string, error) {
-	if b.image == "" {
-		return "", fmt.Errorf("Please provide a source image with `from` prior to run")
-	}
-	b.config.Image = b.image
-	body, _, err := b.cli.call("POST", "/containers/create", b.config)
-	if err != nil {
-		return "", err
-	}
-
-	apiRun := &ApiRun{}
-	if err := json.Unmarshal(body, apiRun); err != nil {
-		return "", err
-	}
-	for _, warning := range apiRun.Warnings {
-		fmt.Fprintln(os.Stderr, "WARNING: ", warning)
-	}
-
-	//start the container
-	_, _, err = b.cli.call("POST", "/containers/"+apiRun.Id+"/start", nil)
-	if err != nil {
-		return "", err
-	}
-	b.tmpContainers[apiRun.Id] = struct{}{}
-
-	// Wait for it to finish
-	body, _, err = b.cli.call("POST", "/containers/"+apiRun.Id+"/wait", nil)
-	if err != nil {
-		return "", err
-	}
-	apiWait := &ApiWait{}
-	if err := json.Unmarshal(body, apiWait); err != nil {
-		return "", err
-	}
-	if apiWait.StatusCode != 0 {
-		return "", fmt.Errorf("The command %v returned a non-zero code: %d", b.config.Cmd, apiWait.StatusCode)
-	}
-
-	return apiRun.Id, nil
-}
-
-func (b *builderClient) commit(id string) error {
-	if b.image == "" {
-		return fmt.Errorf("Please provide a source image with `from` prior to run")
-	}
-	b.config.Image = b.image
-
-	if id == "" {
-		cmd := b.config.Cmd
-		b.config.Cmd = []string{"true"}
-		if cid, err := b.run(); err != nil {
-			return err
-		} else {
-			id = cid
-		}
-		b.config.Cmd = cmd
-	}
-
-	// Commit the container
-	v := url.Values{}
-	v.Set("container", id)
-	v.Set("author", b.maintainer)
-
-	body, _, err := b.cli.call("POST", "/commit?"+v.Encode(), b.config)
-	if err != nil {
-		return err
-	}
-	apiId := &ApiId{}
-	if err := json.Unmarshal(body, apiId); err != nil {
-		return err
-	}
-	b.tmpImages[apiId.Id] = struct{}{}
-	b.image = apiId.Id
-	b.needCommit = false
-	return nil
-}
-
-func (b *builderClient) Build(dockerfile, context io.Reader) (string, error) {
-	defer b.clearTmp(b.tmpContainers, b.tmpImages)
-	file := bufio.NewReader(dockerfile)
-	for {
-		line, err := file.ReadString('\n')
-		if err != nil {
-			if err == io.EOF {
-				break
-			}
-			return "", err
-		}
-		line = strings.Replace(strings.TrimSpace(line), "	", " ", 1)
-		// Skip comments and empty line
-		if len(line) == 0 || line[0] == '#' {
-			continue
-		}
-		tmp := strings.SplitN(line, " ", 2)
-		if len(tmp) != 2 {
-			return "", fmt.Errorf("Invalid Dockerfile format")
-		}
-		instruction := strings.ToLower(strings.Trim(tmp[0], " "))
-		arguments := strings.Trim(tmp[1], " ")
-
-		fmt.Fprintf(os.Stderr, "%s %s (%s)\n", strings.ToUpper(instruction), arguments, b.image)
-
-		method, exists := reflect.TypeOf(b).MethodByName("Cmd" + strings.ToUpper(instruction[:1]) + strings.ToLower(instruction[1:]))
-		if !exists {
-			fmt.Fprintf(os.Stderr, "Skipping unknown instruction %s\n", strings.ToUpper(instruction))
-		}
-		ret := method.Func.Call([]reflect.Value{reflect.ValueOf(b), reflect.ValueOf(arguments)})[0].Interface()
-		if ret != nil {
-			return "", ret.(error)
-		}
-
-		fmt.Fprintf(os.Stderr, "===> %v\n", b.image)
-	}
-	if b.needCommit {
-		if err := b.commit(""); err != nil {
-			return "", err
-		}
-	}
-	if b.image != "" {
-		// The build is successful, keep the temporary containers and images
-		for i := range b.tmpImages {
-			delete(b.tmpImages, i)
-		}
-		for i := range b.tmpContainers {
-			delete(b.tmpContainers, i)
-		}
-		fmt.Fprintf(os.Stderr, "Build finished. image id: %s\n", b.image)
-		return b.image, nil
-	}
-	return "", fmt.Errorf("An error occured during the build\n")
-}
-
-func NewBuilderClient(addr string, port int) BuildFile {
-	return &builderClient{
-		cli:           NewDockerCli(addr, port),
-		config:        &Config{},
-		tmpContainers: make(map[string]struct{}),
-		tmpImages:     make(map[string]struct{}),
-	}
-}
--- a/buildfile.go
+++ b/buildfile.go
@@ -1,364 +0,0 @@
-package docker
-
-import (
-	"bufio"
-	"encoding/json"
-	"fmt"
-	"github.com/dotcloud/docker/utils"
-	"io"
-	"io/ioutil"
-	"os"
-	"path"
-	"reflect"
-	"strings"
-)
-
-type BuildFile interface {
-	Build(io.Reader, io.Reader) (string, error)
-	CmdFrom(string) error
-	CmdRun(string) error
-}
-
-type buildFile struct {
-	runtime *Runtime
-	builder *Builder
-	srv     *Server
-
-	image      string
-	maintainer string
-	config     *Config
-	context    string
-
-	tmpContainers map[string]struct{}
-	tmpImages     map[string]struct{}
-
-	out io.Writer
-}
-
-func (b *buildFile) clearTmp(containers, images map[string]struct{}) {
-	for c := range containers {
-		tmp := b.runtime.Get(c)
-		b.runtime.Destroy(tmp)
-		utils.Debugf("Removing container %s", c)
-	}
-	for i := range images {
-		b.runtime.graph.Delete(i)
-		utils.Debugf("Removing image %s", i)
-	}
-}
-
-func (b *buildFile) CmdFrom(name string) error {
-	image, err := b.runtime.repositories.LookupImage(name)
-	if err != nil {
-		if b.runtime.graph.IsNotExist(err) {
-
-			var tag, remote string
-			if strings.Contains(name, ":") {
-				remoteParts := strings.Split(name, ":")
-				tag = remoteParts[1]
-				remote = remoteParts[0]
-			} else {
-				remote = name
-			}
-
-			if err := b.srv.ImagePull(remote, tag, "", b.out, utils.NewStreamFormatter(false)); err != nil {
-				return err
-			}
-
-			image, err = b.runtime.repositories.LookupImage(name)
-			if err != nil {
-				return err
-			}
-		} else {
-			return err
-		}
-	}
-	b.image = image.Id
-	b.config = &Config{}
-	return nil
-}
-
-func (b *buildFile) CmdMaintainer(name string) error {
-	b.maintainer = name
-	return b.commit("", b.config.Cmd, fmt.Sprintf("MAINTAINER %s", name))
-}
-
-func (b *buildFile) CmdRun(args string) error {
-	if b.image == "" {
-		return fmt.Errorf("Please provide a source image with `from` prior to run")
-	}
-	config, _, err := ParseRun([]string{b.image, "/bin/sh", "-c", args}, nil)
-	if err != nil {
-		return err
-	}
-
-	cmd := b.config.Cmd
-	b.config.Cmd = nil
-	MergeConfig(b.config, config)
-
-	utils.Debugf("Command to be executed: %v", b.config.Cmd)
-
-	if cache, err := b.srv.ImageGetCached(b.image, b.config); err != nil {
-		return err
-	} else if cache != nil {
-		utils.Debugf("[BUILDER] Use cached version")
-		b.image = cache.Id
-		return nil
-	} else {
-		utils.Debugf("[BUILDER] Cache miss")
-	}
-
-	cid, err := b.run()
-	if err != nil {
-		return err
-	}
-	if err := b.commit(cid, cmd, "run"); err != nil {
-		return err
-	}
-	b.config.Cmd = cmd
-	return nil
-}
-
-func (b *buildFile) CmdEnv(args string) error {
-	tmp := strings.SplitN(args, " ", 2)
-	if len(tmp) != 2 {
-		return fmt.Errorf("Invalid ENV format")
-	}
-	key := strings.Trim(tmp[0], " ")
-	value := strings.Trim(tmp[1], " ")
-
-	for i, elem := range b.config.Env {
-		if strings.HasPrefix(elem, key+"=") {
-			b.config.Env[i] = key + "=" + value
-			return nil
-		}
-	}
-	b.config.Env = append(b.config.Env, key+"="+value)
-	return b.commit("", b.config.Cmd, fmt.Sprintf("ENV %s=%s", key, value))
-}
-
-func (b *buildFile) CmdCmd(args string) error {
-	var cmd []string
-	if err := json.Unmarshal([]byte(args), &cmd); err != nil {
-		utils.Debugf("Error unmarshalling: %s, using /bin/sh -c", err)
-		cmd = []string{"/bin/sh", "-c", args}
-	}
-	if err := b.commit("", cmd, fmt.Sprintf("CMD %v", cmd)); err != nil {
-		return err
-	}
-	b.config.Cmd = cmd
-	return nil
-}
-
-func (b *buildFile) CmdExpose(args string) error {
-	ports := strings.Split(args, " ")
-	b.config.PortSpecs = append(ports, b.config.PortSpecs...)
-	return b.commit("", b.config.Cmd, fmt.Sprintf("EXPOSE %v", ports))
-}
-
-func (b *buildFile) CmdInsert(args string) error {
-	return fmt.Errorf("INSERT has been deprecated. Please use ADD instead")
-}
-
-func (b *buildFile) CmdCopy(args string) error {
-	return fmt.Errorf("COPY has been deprecated. Please use ADD instead")
-}
-
-func (b *buildFile) CmdAdd(args string) error {
-	if b.context == "" {
-		return fmt.Errorf("No context given. Impossible to use ADD")
-	}
-	tmp := strings.SplitN(args, " ", 2)
-	if len(tmp) != 2 {
-		return fmt.Errorf("Invalid ADD format")
-	}
-	orig := strings.Trim(tmp[0], " ")
-	dest := strings.Trim(tmp[1], " ")
-
-	cmd := b.config.Cmd
-	b.config.Cmd = []string{"/bin/sh", "-c", fmt.Sprintf("#(nop) ADD %s in %s", orig, dest)}
-	cid, err := b.run()
-	if err != nil {
-		return err
-	}
-
-	container := b.runtime.Get(cid)
-	if container == nil {
-		return fmt.Errorf("Error while creating the container (CmdAdd)")
-	}
-	if err := container.EnsureMounted(); err != nil {
-		return err
-	}
-	defer container.Unmount()
-
-	origPath := path.Join(b.context, orig)
-	destPath := path.Join(container.RootfsPath(), dest)
-
-	fi, err := os.Stat(origPath)
-	if err != nil {
-		return err
-	}
-	if fi.IsDir() {
-		if err := os.MkdirAll(destPath, 0700); err != nil {
-			return err
-		}
-
-		files, err := ioutil.ReadDir(path.Join(b.context, orig))
-		if err != nil {
-			return err
-		}
-		for _, fi := range files {
-			if err := utils.CopyDirectory(path.Join(origPath, fi.Name()), path.Join(destPath, fi.Name())); err != nil {
-				return err
-			}
-		}
-	} else {
-		if err := os.MkdirAll(path.Dir(destPath), 0700); err != nil {
-			return err
-		}
-		if err := utils.CopyDirectory(origPath, destPath); err != nil {
-			return err
-		}
-	}
-	if err := b.commit(cid, cmd, fmt.Sprintf("ADD %s in %s", orig, dest)); err != nil {
-		return err
-	}
-	b.config.Cmd = cmd
-	return nil
-}
-
-func (b *buildFile) run() (string, error) {
-	if b.image == "" {
-		return "", fmt.Errorf("Please provide a source image with `from` prior to run")
-	}
-	b.config.Image = b.image
-
-	// Create the container and start it
-	c, err := b.builder.Create(b.config)
-	if err != nil {
-		return "", err
-	}
-	b.tmpContainers[c.Id] = struct{}{}
-
-	//start the container
-	if err := c.Start(); err != nil {
-		return "", err
-	}
-
-	// Wait for it to finish
-	if ret := c.Wait(); ret != 0 {
-		return "", fmt.Errorf("The command %v returned a non-zero code: %d", b.config.Cmd, ret)
-	}
-
-	return c.Id, nil
-}
-
-// Commit the container <id> with the autorun command <autoCmd>
-func (b *buildFile) commit(id string, autoCmd []string, comment string) error {
-	if b.image == "" {
-		return fmt.Errorf("Please provide a source image with `from` prior to commit")
-	}
-	b.config.Image = b.image
-	if id == "" {
-		b.config.Cmd = []string{"/bin/sh", "-c", "#(nop) " + comment}
-
-		if cache, err := b.srv.ImageGetCached(b.image, b.config); err != nil {
-			return err
-		} else if cache != nil {
-			utils.Debugf("[BUILDER] Use cached version")
-			b.image = cache.Id
-			return nil
-		} else {
-			utils.Debugf("[BUILDER] Cache miss")
-		}
-
-		if cid, err := b.run(); err != nil {
-			return err
-		} else {
-			id = cid
-		}
-	}
-
-	container := b.runtime.Get(id)
-	if container == nil {
-		return fmt.Errorf("An error occured while creating the container")
-	}
-
-	// Note: Actually copy the struct
-	autoConfig := *b.config
-	autoConfig.Cmd = autoCmd
-	// Commit the container
-	image, err := b.builder.Commit(container, "", "", "", b.maintainer, &autoConfig)
-	if err != nil {
-		return err
-	}
-	b.tmpImages[image.Id] = struct{}{}
-	b.image = image.Id
-	return nil
-}
-
-func (b *buildFile) Build(dockerfile, context io.Reader) (string, error) {
-	if context != nil {
-		name, err := ioutil.TempDir("/tmp", "docker-build")
-		if err != nil {
-			return "", err
-		}
-		if err := Untar(context, name); err != nil {
-			return "", err
-		}
-		defer os.RemoveAll(name)
-		b.context = name
-	}
-	file := bufio.NewReader(dockerfile)
-	for {
-		line, err := file.ReadString('\n')
-		if err != nil {
-			if err == io.EOF {
-				break
-			}
-			return "", err
-		}
-		line = strings.Replace(strings.TrimSpace(line), "	", " ", 1)
-		// Skip comments and empty line
-		if len(line) == 0 || line[0] == '#' {
-			continue
-		}
-		tmp := strings.SplitN(line, " ", 2)
-		if len(tmp) != 2 {
-			return "", fmt.Errorf("Invalid Dockerfile format")
-		}
-		instruction := strings.ToLower(strings.Trim(tmp[0], " "))
-		arguments := strings.Trim(tmp[1], " ")
-
-		fmt.Fprintf(b.out, "%s %s (%s)\n", strings.ToUpper(instruction), arguments, b.image)
-
-		method, exists := reflect.TypeOf(b).MethodByName("Cmd" + strings.ToUpper(instruction[:1]) + strings.ToLower(instruction[1:]))
-		if !exists {
-			fmt.Fprintf(b.out, "Skipping unknown instruction %s\n", strings.ToUpper(instruction))
-			continue
-		}
-		ret := method.Func.Call([]reflect.Value{reflect.ValueOf(b), reflect.ValueOf(arguments)})[0].Interface()
-		if ret != nil {
-			return "", ret.(error)
-		}
-
-		fmt.Fprintf(b.out, "===> %v\n", b.image)
-	}
-	if b.image != "" {
-		fmt.Fprintf(b.out, "Build successful.\n===> %s\n", b.image)
-		return b.image, nil
-	}
-	return "", fmt.Errorf("An error occured during the build\n")
-}
-
-func NewBuildFile(srv *Server, out io.Writer) BuildFile {
-	return &buildFile{
-		builder:       NewBuilder(srv.runtime),
-		runtime:       srv.runtime,
-		srv:           srv,
-		config:        &Config{},
-		out:           out,
-		tmpContainers: make(map[string]struct{}),
-		tmpImages:     make(map[string]struct{}),
-	}
-}
--- a/buildfile_test.go
+++ b/buildfile_test.go
@@ -1,72 +0,0 @@
-package docker
-
-import (
-	"github.com/dotcloud/docker/utils"
-	"strings"
-	"testing"
-)
-
-const Dockerfile = `
-# VERSION		0.1
-# DOCKER-VERSION	0.2
-
-from   ` + unitTestImageName + `
-run    sh -c 'echo root:testpass > /tmp/passwd'
-run    mkdir -p /var/run/sshd
-`
-
-func TestBuild(t *testing.T) {
-	runtime, err := newTestRuntime()
-	if err != nil {
-		t.Fatal(err)
-	}
-	defer nuke(runtime)
-
-	srv := &Server{runtime: runtime}
-
-	buildfile := NewBuildFile(srv, &utils.NopWriter{})
-
-	imgId, err := buildfile.Build(strings.NewReader(Dockerfile), nil)
-	if err != nil {
-		t.Fatal(err)
-	}
-
-	builder := NewBuilder(runtime)
-	container, err := builder.Create(
-		&Config{
-			Image: imgId,
-			Cmd:   []string{"cat", "/tmp/passwd"},
-		},
-	)
-	if err != nil {
-		t.Fatal(err)
-	}
-	defer runtime.Destroy(container)
-
-	output, err := container.Output()
-	if err != nil {
-		t.Fatal(err)
-	}
-	if string(output) != "root:testpass\n" {
-		t.Fatalf("Unexpected output. Read '%s', expected '%s'", output, "root:testpass\n")
-	}
-
-	container2, err := builder.Create(
-		&Config{
-			Image: imgId,
-			Cmd:   []string{"ls", "-d", "/var/run/sshd"},
-		},
-	)
-	if err != nil {
-		t.Fatal(err)
-	}
-	defer runtime.Destroy(container2)
-
-	output, err = container2.Output()
-	if err != nil {
-		t.Fatal(err)
-	}
-	if string(output) != "/var/run/sshd\n" {
-		t.Fatal("/var/run/sshd has not been created")
-	}
-}
--- a/changes.go
+++ b/changes.go
@@ -65,7 +65,7 @@ func Changes(layers []string, rw string) ([]Change, error) {
 		file := filepath.Base(path)
 		// If there is a whiteout, then the file was removed
 		if strings.HasPrefix(file, ".wh.") {
-			originalFile := file[len(".wh."):]
+			originalFile := strings.TrimLeft(file, ".wh.")
 			change.Path = filepath.Join(filepath.Dir(path), originalFile)
 			change.Kind = ChangeDelete
 		} else {
--- a/commands.go
+++ b/commands.go
--- a/commands_test.go
+++ b/commands_test.go
@@ -3,8 +3,9 @@ package docker
 import (
 	"bufio"
 	"fmt"
+	"github.com/dotcloud/docker/rcli"
 	"io"
-	_ "io/ioutil"
+	"io/ioutil"
 	"strings"
 	"testing"
 	"time"
@@ -58,7 +59,6 @@ func assertPipe(input, output string, r io.Reader, w io.Writer, count int) error
 	return nil
 }

-/*TODO
 func cmdWait(srv *Server, container *Container) error {
 	stdout, stdoutPipe := io.Pipe()

@@ -73,77 +73,6 @@ func cmdWait(srv *Server, container *Container) error {
 	return closeWrap(stdout, stdoutPipe)
 }

-func cmdImages(srv *Server, args ...string) (string, error) {
-	stdout, stdoutPipe := io.Pipe()
-
-	go func() {
-		if err := srv.CmdImages(nil, stdoutPipe, args...); err != nil {
-			return
-		}
-
-		// force the pipe closed, so that the code below gets an EOF
-		stdoutPipe.Close()
-	}()
-
-	output, err := ioutil.ReadAll(stdout)
-	if err != nil {
-		return "", err
-	}
-
-	// Cleanup pipes
-	return string(output), closeWrap(stdout, stdoutPipe)
-}
-
-// TestImages checks that 'docker images' displays information correctly
-func TestImages(t *testing.T) {
-
-	runtime, err := newTestRuntime()
-	if err != nil {
-		t.Fatal(err)
-	}
-	defer nuke(runtime)
-
-	srv := &Server{runtime: runtime}
-
-	output, err := cmdImages(srv)
-
-	if !strings.Contains(output, "REPOSITORY") {
-		t.Fatal("'images' should have a header")
-	}
-	if !strings.Contains(output, "docker-ut") {
-		t.Fatal("'images' should show the docker-ut image")
-	}
-	if !strings.Contains(output, "e9aa60c60128") {
-		t.Fatal("'images' should show the docker-ut image id")
-	}
-
-	output, err = cmdImages(srv, "-q")
-
-	if strings.Contains(output, "REPOSITORY") {
-		t.Fatal("'images -q' should not have a header")
-	}
-	if strings.Contains(output, "docker-ut") {
-		t.Fatal("'images' should not show the docker-ut image name")
-	}
-	if !strings.Contains(output, "e9aa60c60128") {
-		t.Fatal("'images' should show the docker-ut image id")
-	}
-
-	output, err = cmdImages(srv, "-viz")
-
-	if !strings.HasPrefix(output, "digraph docker {") {
-		t.Fatal("'images -v' should start with the dot header")
-	}
-	if !strings.HasSuffix(output, "}\n") {
-		t.Fatal("'images -v' should end with a '}'")
-	}
-	if !strings.Contains(output, "base -> \"e9aa60c60128\" [style=invis]") {
-		t.Fatal("'images -v' should have the docker-ut image id node")
-	}
-
-	// todo: add checks for -a
-}
-
 // TestRunHostname checks that 'docker run -h' correctly sets a custom hostname
 func TestRunHostname(t *testing.T) {
 	runtime, err := newTestRuntime()
@@ -410,10 +339,9 @@ func TestAttachDisconnect(t *testing.T) {

 	srv := &Server{runtime: runtime}

-	container, err := NewBuilder(runtime).Create(
+	container, err := runtime.Create(
 		&Config{
 			Image:     GetTestImage(runtime).Id,
-			CpuShares: 1000,
 			Memory:    33554432,
 			Cmd:       []string{"/bin/cat"},
 			OpenStdin: true,
@@ -466,6 +394,4 @@ func TestAttachDisconnect(t *testing.T) {
 	// Try to avoid the timeoout in destroy. Best effort, don't check error
 	cStdin, _ := container.StdinPipe()
 	cStdin.Close()
-	container.Wait()
 }
-*/
--- a/container.go
+++ b/container.go
@@ -2,10 +2,8 @@ package docker

 import (
 	"encoding/json"
-	"flag"
 	"fmt"
-	"github.com/dotcloud/docker/term"
-	"github.com/dotcloud/docker/utils"
+	"github.com/dotcloud/docker/rcli"
 	"github.com/kr/pty"
 	"io"
 	"io/ioutil"
@@ -41,8 +39,8 @@ type Container struct {
 	ResolvConfPath string

 	cmd       *exec.Cmd
-	stdout    *utils.WriteBroadcaster
-	stderr    *utils.WriteBroadcaster
+	stdout    *writeBroadcaster
+	stderr    *writeBroadcaster
 	stdin     io.ReadCloser
 	stdinPipe io.WriteCloser
 	ptyMaster io.Closer
@@ -50,7 +48,6 @@ type Container struct {
 	runtime *Runtime

 	waitLock chan struct{}
-	Volumes  map[string]string
 }

 type Config struct {
@@ -58,7 +55,6 @@ type Config struct {
 	User         string
 	Memory       int64 // Memory limit (in bytes)
 	MemorySwap   int64 // Total memory usage (memory + swap); set `-1' to disable swap
-	CpuShares    int64 // CPU shares (relative weight vs. other containers)
 	AttachStdin  bool
 	AttachStdout bool
 	AttachStderr bool
@@ -70,12 +66,10 @@ type Config struct {
 	Cmd          []string
 	Dns          []string
 	Image        string // Name of the image as it was passed by the operator (eg. could be symbolic)
-	Volumes      map[string]struct{}
-	VolumesFrom  string
 }

-func ParseRun(args []string, capabilities *Capabilities) (*Config, *flag.FlagSet, error) {
-	cmd := Subcmd("run", "[OPTIONS] IMAGE COMMAND [ARG...]", "Run a command in a new container")
+func ParseRun(args []string, stdout io.Writer, capabilities *Capabilities) (*Config, error) {
+	cmd := rcli.Subcmd(stdout, "run", "[OPTIONS] IMAGE COMMAND [ARG...]", "Run a command in a new container")
 	if len(args) > 0 && args[0] != "--help" {
 		cmd.SetOutput(ioutil.Discard)
 	}
@@ -89,13 +83,11 @@ func ParseRun(args []string, capabilities *Capabilities) (*Config, *flag.FlagSet
 	flTty := cmd.Bool("t", false, "Allocate a pseudo-tty")
 	flMemory := cmd.Int64("m", 0, "Memory limit (in bytes)")

-	if capabilities != nil && *flMemory > 0 && !capabilities.MemoryLimit {
-		//fmt.Fprintf(stdout, "WARNING: Your kernel does not support memory limit capabilities. Limitation discarded.\n")
+	if *flMemory > 0 && !capabilities.MemoryLimit {
+		fmt.Fprintf(stdout, "WARNING: Your kernel does not support memory limit capabilities. Limitation discarded.\n")
 		*flMemory = 0
 	}

-	flCpuShares := cmd.Int64("c", 0, "CPU shares (relative weight)")
-
 	var flPorts ListOpts
 	cmd.Var(&flPorts, "p", "Expose a container's port to the host (use 'docker port' to see the actual mapping)")

@@ -105,16 +97,11 @@ func ParseRun(args []string, capabilities *Capabilities) (*Config, *flag.FlagSet
 	var flDns ListOpts
 	cmd.Var(&flDns, "dns", "Set custom dns servers")

-	flVolumes := NewPathOpts()
-	cmd.Var(flVolumes, "v", "Attach a data volume")
-
-	flVolumesFrom := cmd.String("volumes-from", "", "Mount volumes from the specified container")
-
 	if err := cmd.Parse(args); err != nil {
-		return nil, cmd, err
+		return nil, err
 	}
 	if *flDetach && len(flAttach) > 0 {
-		return nil, cmd, fmt.Errorf("Conflicting options: -a and -d")
+		return nil, fmt.Errorf("Conflicting options: -a and -d")
 	}
 	// If neither -d or -a are set, attach to everything by default
 	if len(flAttach) == 0 && !*flDetach {
@@ -142,7 +129,6 @@ func ParseRun(args []string, capabilities *Capabilities) (*Config, *flag.FlagSet
 		Tty:          *flTty,
 		OpenStdin:    *flStdin,
 		Memory:       *flMemory,
-		CpuShares:    *flCpuShares,
 		AttachStdin:  flAttach.Get("stdin"),
 		AttachStdout: flAttach.Get("stdout"),
 		AttachStderr: flAttach.Get("stderr"),
@@ -150,12 +136,10 @@ func ParseRun(args []string, capabilities *Capabilities) (*Config, *flag.FlagSet
 		Cmd:          runCmd,
 		Dns:          flDns,
 		Image:        image,
-		Volumes:      flVolumes,
-		VolumesFrom:  *flVolumesFrom,
 	}

-	if capabilities != nil && *flMemory > 0 && !capabilities.SwapLimit {
-		//fmt.Fprintf(stdout, "WARNING: Your kernel does not support swap limit capabilities. Limitation discarded.\n")
+	if *flMemory > 0 && !capabilities.SwapLimit {
+		fmt.Fprintf(stdout, "WARNING: Your kernel does not support swap limit capabilities. Limitation discarded.\n")
 		config.MemorySwap = -1
 	}

@@ -163,7 +147,7 @@ func ParseRun(args []string, capabilities *Capabilities) (*Config, *flag.FlagSet
 	if config.OpenStdin && config.AttachStdin {
 		config.StdinOnce = true
 	}
-	return config, cmd, nil
+	return config, nil
 }

 type NetworkSettings struct {
@@ -253,9 +237,9 @@ func (container *Container) startPty() error {
 	// Copy the PTYs to our broadcasters
 	go func() {
 		defer container.stdout.CloseWriters()
-		utils.Debugf("[startPty] Begin of stdout pipe")
+		Debugf("[startPty] Begin of stdout pipe")
 		io.Copy(container.stdout, ptyMaster)
-		utils.Debugf("[startPty] End of stdout pipe")
+		Debugf("[startPty] End of stdout pipe")
 	}()

 	// stdin
@@ -264,9 +248,9 @@ func (container *Container) startPty() error {
 		container.cmd.SysProcAttr = &syscall.SysProcAttr{Setctty: true, Setsid: true}
 		go func() {
 			defer container.stdin.Close()
-			utils.Debugf("[startPty] Begin of stdin pipe")
+			Debugf("[startPty] Begin of stdin pipe")
 			io.Copy(ptyMaster, container.stdin)
-			utils.Debugf("[startPty] End of stdin pipe")
+			Debugf("[startPty] End of stdin pipe")
 		}()
 	}
 	if err := container.cmd.Start(); err != nil {
@@ -286,9 +270,9 @@ func (container *Container) start() error {
 		}
 		go func() {
 			defer stdin.Close()
-			utils.Debugf("Begin of stdin pipe [start]")
+			Debugf("Begin of stdin pipe [start]")
 			io.Copy(stdin, container.stdin)
-			utils.Debugf("End of stdin pipe [start]")
+			Debugf("End of stdin pipe [start]")
 		}()
 	}
 	return container.cmd.Start()
@@ -305,8 +289,8 @@ func (container *Container) Attach(stdin io.ReadCloser, stdinCloser io.Closer, s
 			errors <- err
 		} else {
 			go func() {
-				utils.Debugf("[start] attach stdin\n")
-				defer utils.Debugf("[end] attach stdin\n")
+				Debugf("[start] attach stdin\n")
+				defer Debugf("[end] attach stdin\n")
 				// No matter what, when stdin is closed (io.Copy unblock), close stdout and stderr
 				if cStdout != nil {
 					defer cStdout.Close()
@@ -318,12 +302,12 @@ func (container *Container) Attach(stdin io.ReadCloser, stdinCloser io.Closer, s
 					defer cStdin.Close()
 				}
 				if container.Config.Tty {
-					_, err = utils.CopyEscapable(cStdin, stdin)
+					_, err = CopyEscapable(cStdin, stdin)
 				} else {
 					_, err = io.Copy(cStdin, stdin)
 				}
 				if err != nil {
-					utils.Debugf("[error] attach stdin: %s\n", err)
+					Debugf("[error] attach stdin: %s\n", err)
 				}
 				// Discard error, expecting pipe error
 				errors <- nil
@@ -337,8 +321,8 @@ func (container *Container) Attach(stdin io.ReadCloser, stdinCloser io.Closer, s
 		} else {
 			cStdout = p
 			go func() {
-				utils.Debugf("[start] attach stdout\n")
-				defer utils.Debugf("[end]  attach stdout\n")
+				Debugf("[start] attach stdout\n")
+				defer Debugf("[end]  attach stdout\n")
 				// If we are in StdinOnce mode, then close stdin
 				if container.Config.StdinOnce {
 					if stdin != nil {
@@ -350,7 +334,7 @@ func (container *Container) Attach(stdin io.ReadCloser, stdinCloser io.Closer, s
 				}
 				_, err := io.Copy(stdout, cStdout)
 				if err != nil {
-					utils.Debugf("[error] attach stdout: %s\n", err)
+					Debugf("[error] attach stdout: %s\n", err)
 				}
 				errors <- err
 			}()
@@ -363,8 +347,8 @@ func (container *Container) Attach(stdin io.ReadCloser, stdinCloser io.Closer, s
 		} else {
 			cStderr = p
 			go func() {
-				utils.Debugf("[start] attach stderr\n")
-				defer utils.Debugf("[end]  attach stderr\n")
+				Debugf("[start] attach stderr\n")
+				defer Debugf("[end]  attach stderr\n")
 				// If we are in StdinOnce mode, then close stdin
 				if container.Config.StdinOnce {
 					if stdin != nil {
@@ -376,13 +360,13 @@ func (container *Container) Attach(stdin io.ReadCloser, stdinCloser io.Closer, s
 				}
 				_, err := io.Copy(stderr, cStderr)
 				if err != nil {
-					utils.Debugf("[error] attach stderr: %s\n", err)
+					Debugf("[error] attach stderr: %s\n", err)
 				}
 				errors <- err
 			}()
 		}
 	}
-	return utils.Go(func() error {
+	return Go(func() error {
 		if cStdout != nil {
 			defer cStdout.Close()
 		}
@@ -392,14 +376,14 @@ func (container *Container) Attach(stdin io.ReadCloser, stdinCloser io.Closer, s
 		// FIXME: how do clean up the stdin goroutine without the unwanted side effect
 		// of closing the passed stdin? Add an intermediary io.Pipe?
 		for i := 0; i < nJobs; i += 1 {
-			utils.Debugf("Waiting for job %d/%d\n", i+1, nJobs)
+			Debugf("Waiting for job %d/%d\n", i+1, nJobs)
 			if err := <-errors; err != nil {
-				utils.Debugf("Job %d returned error %s. Aborting all jobs\n", i+1, err)
+				Debugf("Job %d returned error %s. Aborting all jobs\n", i+1, err)
 				return err
 			}
-			utils.Debugf("Job %d completed successfully\n", i+1)
+			Debugf("Job %d completed successfully\n", i+1)
 		}
-		utils.Debugf("All jobs completed successfully\n")
+		Debugf("All jobs completed successfully\n")
 		return nil
 	})
 }
@@ -427,40 +411,10 @@ func (container *Container) Start() error {
 		log.Printf("WARNING: Your kernel does not support swap limit capabilities. Limitation discarded.\n")
 		container.Config.MemorySwap = -1
 	}
-	container.Volumes = make(map[string]string)
-
-	// Create the requested volumes volumes
-	for volPath := range container.Config.Volumes {
-		if c, err := container.runtime.volumes.Create(nil, container, "", "", nil); err != nil {
-			return err
-		} else {
-			if err := os.MkdirAll(path.Join(container.RootfsPath(), volPath), 0755); err != nil {
-				return nil
-			}
-			container.Volumes[volPath] = c.Id
-		}
-	}
-
-	if container.Config.VolumesFrom != "" {
-		c := container.runtime.Get(container.Config.VolumesFrom)
-		if c == nil {
-			return fmt.Errorf("Container %s not found. Impossible to mount its volumes", container.Id)
-		}
-		for volPath, id := range c.Volumes {
-			if _, exists := container.Volumes[volPath]; exists {
-				return fmt.Errorf("The requested volume %s overlap one of the volume of the container %s", volPath, c.Id)
-			}
-			if err := os.MkdirAll(path.Join(container.RootfsPath(), volPath), 0755); err != nil {
-				return nil
-			}
-			container.Volumes[volPath] = id
-		}
-	}

 	if err := container.generateLXCConfig(); err != nil {
 		return err
 	}
-
 	params := []string{
 		"-n", container.Id,
 		"-f", container.lxcConfigPath(),
@@ -519,7 +473,6 @@ func (container *Container) Start() error {

 	// Init the lock
 	container.waitLock = make(chan struct{})
-
 	container.ToDisk()
 	go container.monitor()
 	return nil
@@ -557,13 +510,13 @@ func (container *Container) StdinPipe() (io.WriteCloser, error) {
 func (container *Container) StdoutPipe() (io.ReadCloser, error) {
 	reader, writer := io.Pipe()
 	container.stdout.AddWriter(writer)
-	return utils.NewBufReader(reader), nil
+	return newBufReader(reader), nil
 }

 func (container *Container) StderrPipe() (io.ReadCloser, error) {
 	reader, writer := io.Pipe()
 	container.stderr.AddWriter(writer)
-	return utils.NewBufReader(reader), nil
+	return newBufReader(reader), nil
 }

 func (container *Container) allocateNetwork() error {
@@ -611,20 +564,20 @@ func (container *Container) waitLxc() error {

 func (container *Container) monitor() {
 	// Wait for the program to exit
-	utils.Debugf("Waiting for process")
+	Debugf("Waiting for process")

 	// If the command does not exists, try to wait via lxc
 	if container.cmd == nil {
 		if err := container.waitLxc(); err != nil {
-			utils.Debugf("%s: Process: %s", container.Id, err)
+			Debugf("%s: Process: %s", container.Id, err)
 		}
 	} else {
 		if err := container.cmd.Wait(); err != nil {
 			// Discard the error as any signals or non 0 returns will generate an error
-			utils.Debugf("%s: Process: %s", container.Id, err)
+			Debugf("%s: Process: %s", container.Id, err)
 		}
 	}
-	utils.Debugf("Process finished")
+	Debugf("Process finished")

 	var exitCode int = -1
 	if container.cmd != nil {
@@ -635,19 +588,19 @@ func (container *Container) monitor() {
 	container.releaseNetwork()
 	if container.Config.OpenStdin {
 		if err := container.stdin.Close(); err != nil {
-			utils.Debugf("%s: Error close stdin: %s", container.Id, err)
+			Debugf("%s: Error close stdin: %s", container.Id, err)
 		}
 	}
 	if err := container.stdout.CloseWriters(); err != nil {
-		utils.Debugf("%s: Error close stdout: %s", container.Id, err)
+		Debugf("%s: Error close stdout: %s", container.Id, err)
 	}
 	if err := container.stderr.CloseWriters(); err != nil {
-		utils.Debugf("%s: Error close stderr: %s", container.Id, err)
+		Debugf("%s: Error close stderr: %s", container.Id, err)
 	}

 	if container.ptyMaster != nil {
 		if err := container.ptyMaster.Close(); err != nil {
-			utils.Debugf("%s: Error closing Pty master: %s", container.Id, err)
+			Debugf("%s: Error closing Pty master: %s", container.Id, err)
 		}
 	}

@@ -755,26 +708,10 @@ func (container *Container) Wait() int {
 	return container.State.ExitCode
 }

-func (container *Container) Resize(h, w int) error {
-	pty, ok := container.ptyMaster.(*os.File)
-	if !ok {
-		return fmt.Errorf("ptyMaster does not have Fd() method")
-	}
-	return term.SetWinsize(pty.Fd(), &term.Winsize{Height: uint16(h), Width: uint16(w)})
-}
-
 func (container *Container) ExportRw() (Archive, error) {
 	return Tar(container.rwPath(), Uncompressed)
 }

-func (container *Container) RwChecksum() (string, error) {
-	rwData, err := Tar(container.rwPath(), Xz)
-	if err != nil {
-		return "", err
-	}
-	return utils.HashData(rwData)
-}
-
 func (container *Container) Export() (Archive, error) {
 	if err := container.EnsureMounted(); err != nil {
 		return nil, err
@@ -843,7 +780,7 @@ func (container *Container) Unmount() error {
 // In case of a collision a lookup with Runtime.Get() will fail, and the caller
 // will need to use a langer prefix, or the full-length container Id.
 func (container *Container) ShortId() string {
-	return utils.TruncateId(container.Id)
+	return TruncateId(container.Id)
 }

 func (container *Container) logPath(name string) string {
@@ -867,22 +804,6 @@ func (container *Container) RootfsPath() string {
 	return path.Join(container.root, "rootfs")
 }

-func (container *Container) GetVolumes() (map[string]string, error) {
-	ret := make(map[string]string)
-	for volPath, id := range container.Volumes {
-		volume, err := container.runtime.volumes.Get(id)
-		if err != nil {
-			return nil, err
-		}
-		root, err := volume.root()
-		if err != nil {
-			return nil, err
-		}
-		ret[volPath] = path.Join(root, "layer")
-	}
-	return ret, nil
-}
-
 func (container *Container) rwPath() string {
 	return path.Join(container.root, "rw")
 }
--- a/container_test.go
+++ b/container_test.go
@@ -20,10 +20,11 @@ func TestIdFormat(t *testing.T) {
 		t.Fatal(err)
 	}
 	defer nuke(runtime)
-	container1, err := NewBuilder(runtime).Create(
+	container1, err := runtime.Create(
 		&Config{
-			Image: GetTestImage(runtime).Id,
-			Cmd:   []string{"/bin/sh", "-c", "echo hello world"},
+			Image:  GetTestImage(runtime).Id,
+			Cmd:    []string{"/bin/sh", "-c", "echo hello world"},
+			Memory: 33554432,
 		},
 	)
 	if err != nil {
@@ -44,11 +45,12 @@ func TestMultipleAttachRestart(t *testing.T) {
 		t.Fatal(err)
 	}
 	defer nuke(runtime)
-	container, err := NewBuilder(runtime).Create(
+	container, err := runtime.Create(
 		&Config{
 			Image: GetTestImage(runtime).Id,
 			Cmd: []string{"/bin/sh", "-c",
 				"i=1; while [ $i -le 5 ]; do i=`expr $i + 1`;  echo hello; done"},
+			Memory: 33554432,
 		},
 	)
 	if err != nil {
@@ -114,8 +116,8 @@ func TestMultipleAttachRestart(t *testing.T) {
 	if err := container.Start(); err != nil {
 		t.Fatal(err)
 	}
-
-	setTimeout(t, "Timeout reading from the process", 3*time.Second, func() {
+	timeout := make(chan bool)
+	go func() {
 		l1, err = bufio.NewReader(stdout1).ReadString('\n')
 		if err != nil {
 			t.Fatal(err)
@@ -137,8 +139,15 @@ func TestMultipleAttachRestart(t *testing.T) {
 		if strings.Trim(l3, " \r\n") != "hello" {
 			t.Fatalf("Unexpected output. Expected [%s], received [%s]", "hello", l3)
 		}
-	})
-	container.Wait()
+		timeout <- false
+	}()
+	go func() {
+		time.Sleep(3 * time.Second)
+		timeout <- true
+	}()
+	if <-timeout {
+		t.Fatalf("Timeout reading from the process")
+	}
 }

 func TestDiff(t *testing.T) {
@@ -148,10 +157,8 @@ func TestDiff(t *testing.T) {
 	}
 	defer nuke(runtime)

-	builder := NewBuilder(runtime)
-
 	// Create a container and remove a file
-	container1, err := builder.Create(
+	container1, err := runtime.Create(
 		&Config{
 			Image: GetTestImage(runtime).Id,
 			Cmd:   []string{"/bin/rm", "/etc/passwd"},
@@ -186,13 +193,13 @@ func TestDiff(t *testing.T) {
 	if err != nil {
 		t.Error(err)
 	}
-	img, err := runtime.graph.Create(rwTar, container1, "unit test commited image - diff", "", nil)
+	img, err := runtime.graph.Create(rwTar, container1, "unit test commited image - diff", "")
 	if err != nil {
 		t.Error(err)
 	}

 	// Create a new container from the commited image
-	container2, err := builder.Create(
+	container2, err := runtime.Create(
 		&Config{
 			Image: img.Id,
 			Cmd:   []string{"cat", "/etc/passwd"},
@@ -217,116 +224,6 @@ func TestDiff(t *testing.T) {
 			t.Fatalf("/etc/passwd should not be present in the diff after commit.")
 		}
 	}
-
-	// Create a new containere
-	container3, err := builder.Create(
-		&Config{
-			Image: GetTestImage(runtime).Id,
-			Cmd:   []string{"rm", "/bin/httpd"},
-		},
-	)
-	if err != nil {
-		t.Fatal(err)
-	}
-	defer runtime.Destroy(container3)
-
-	if err := container3.Run(); err != nil {
-		t.Fatal(err)
-	}
-
-	// Check the changelog
-	c, err = container3.Changes()
-	if err != nil {
-		t.Fatal(err)
-	}
-	success = false
-	for _, elem := range c {
-		if elem.Path == "/bin/httpd" && elem.Kind == 2 {
-			success = true
-		}
-	}
-	if !success {
-		t.Fatalf("/bin/httpd should be present in the diff after commit.")
-	}
-}
-
-func TestCommitAutoRun(t *testing.T) {
-	runtime, err := newTestRuntime()
-	if err != nil {
-		t.Fatal(err)
-	}
-	defer nuke(runtime)
-
-	builder := NewBuilder(runtime)
-	container1, err := builder.Create(
-		&Config{
-			Image: GetTestImage(runtime).Id,
-			Cmd:   []string{"/bin/sh", "-c", "echo hello > /world"},
-		},
-	)
-	if err != nil {
-		t.Fatal(err)
-	}
-	defer runtime.Destroy(container1)
-
-	if container1.State.Running {
-		t.Errorf("Container shouldn't be running")
-	}
-	if err := container1.Run(); err != nil {
-		t.Fatal(err)
-	}
-	if container1.State.Running {
-		t.Errorf("Container shouldn't be running")
-	}
-
-	rwTar, err := container1.ExportRw()
-	if err != nil {
-		t.Error(err)
-	}
-	img, err := runtime.graph.Create(rwTar, container1, "unit test commited image", "", &Config{Cmd: []string{"cat", "/world"}})
-	if err != nil {
-		t.Error(err)
-	}
-
-	// FIXME: Make a TestCommit that stops here and check docker.root/layers/img.id/world
-	container2, err := builder.Create(
-		&Config{
-			Image: img.Id,
-		},
-	)
-	if err != nil {
-		t.Fatal(err)
-	}
-	defer runtime.Destroy(container2)
-	stdout, err := container2.StdoutPipe()
-	if err != nil {
-		t.Fatal(err)
-	}
-	stderr, err := container2.StderrPipe()
-	if err != nil {
-		t.Fatal(err)
-	}
-	if err := container2.Start(); err != nil {
-		t.Fatal(err)
-	}
-	container2.Wait()
-	output, err := ioutil.ReadAll(stdout)
-	if err != nil {
-		t.Fatal(err)
-	}
-	output2, err := ioutil.ReadAll(stderr)
-	if err != nil {
-		t.Fatal(err)
-	}
-	if err := stdout.Close(); err != nil {
-		t.Fatal(err)
-	}
-	if err := stderr.Close(); err != nil {
-		t.Fatal(err)
-	}
-	if string(output) != "hello\n" {
-		t.Fatalf("Unexpected output. Expected %s, received: %s (err: %s)", "hello\n", output, output2)
-	}
 }

 func TestCommitRun(t *testing.T) {
@@ -335,13 +232,11 @@ func TestCommitRun(t *testing.T) {
 		t.Fatal(err)
 	}
 	defer nuke(runtime)
-
-	builder := NewBuilder(runtime)
-
-	container1, err := builder.Create(
+	container1, err := runtime.Create(
 		&Config{
-			Image: GetTestImage(runtime).Id,
-			Cmd:   []string{"/bin/sh", "-c", "echo hello > /world"},
+			Image:  GetTestImage(runtime).Id,
+			Cmd:    []string{"/bin/sh", "-c", "echo hello > /world"},
+			Memory: 33554432,
 		},
 	)
 	if err != nil {
@@ -363,17 +258,18 @@ func TestCommitRun(t *testing.T) {
 	if err != nil {
 		t.Error(err)
 	}
-	img, err := runtime.graph.Create(rwTar, container1, "unit test commited image", "", nil)
+	img, err := runtime.graph.Create(rwTar, container1, "unit test commited image", "")
 	if err != nil {
 		t.Error(err)
 	}

 	// FIXME: Make a TestCommit that stops here and check docker.root/layers/img.id/world

-	container2, err := builder.Create(
+	container2, err := runtime.Create(
 		&Config{
-			Image: img.Id,
-			Cmd:   []string{"cat", "/world"},
+			Image:  img.Id,
+			Memory: 33554432,
+			Cmd:    []string{"cat", "/world"},
 		},
 	)
 	if err != nil {
@@ -417,11 +313,10 @@ func TestStart(t *testing.T) {
 		t.Fatal(err)
 	}
 	defer nuke(runtime)
-	container, err := NewBuilder(runtime).Create(
+	container, err := runtime.Create(
 		&Config{
 			Image:     GetTestImage(runtime).Id,
 			Memory:    33554432,
-			CpuShares: 1000,
 			Cmd:       []string{"/bin/cat"},
 			OpenStdin: true,
 		},
@@ -431,11 +326,6 @@ func TestStart(t *testing.T) {
 	}
 	defer runtime.Destroy(container)

-	cStdin, err := container.StdinPipe()
-	if err != nil {
-		t.Fatal(err)
-	}
-
 	if err := container.Start(); err != nil {
 		t.Fatal(err)
 	}
@@ -451,6 +341,7 @@ func TestStart(t *testing.T) {
 	}

 	// Try to avoid the timeoout in destroy. Best effort, don't check error
+	cStdin, _ := container.StdinPipe()
 	cStdin.Close()
 	container.WaitTimeout(2 * time.Second)
 }
@@ -461,10 +352,11 @@ func TestRun(t *testing.T) {
 		t.Fatal(err)
 	}
 	defer nuke(runtime)
-	container, err := NewBuilder(runtime).Create(
+	container, err := runtime.Create(
 		&Config{
-			Image: GetTestImage(runtime).Id,
-			Cmd:   []string{"ls", "-al"},
+			Image:  GetTestImage(runtime).Id,
+			Memory: 33554432,
+			Cmd:    []string{"ls", "-al"},
 		},
 	)
 	if err != nil {
@@ -489,7 +381,7 @@ func TestOutput(t *testing.T) {
 		t.Fatal(err)
 	}
 	defer nuke(runtime)
-	container, err := NewBuilder(runtime).Create(
+	container, err := runtime.Create(
 		&Config{
 			Image: GetTestImage(runtime).Id,
 			Cmd:   []string{"echo", "-n", "foobar"},
@@ -514,7 +406,7 @@ func TestKillDifferentUser(t *testing.T) {
 		t.Fatal(err)
 	}
 	defer nuke(runtime)
-	container, err := NewBuilder(runtime).Create(&Config{
+	container, err := runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"tail", "-f", "/etc/resolv.conf"},
 		User:  "daemon",
@@ -562,7 +454,7 @@ func TestKill(t *testing.T) {
 		t.Fatal(err)
 	}
 	defer nuke(runtime)
-	container, err := NewBuilder(runtime).Create(&Config{
+	container, err := runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"cat", "/dev/zero"},
 	},
@@ -608,9 +500,7 @@ func TestExitCode(t *testing.T) {
 	}
 	defer nuke(runtime)

-	builder := NewBuilder(runtime)
-
-	trueContainer, err := builder.Create(&Config{
+	trueContainer, err := runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"/bin/true", ""},
 	})
@@ -625,7 +515,7 @@ func TestExitCode(t *testing.T) {
 		t.Errorf("Unexpected exit code %d (expected 0)", trueContainer.State.ExitCode)
 	}

-	falseContainer, err := builder.Create(&Config{
+	falseContainer, err := runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"/bin/false", ""},
 	})
@@ -647,7 +537,7 @@ func TestRestart(t *testing.T) {
 		t.Fatal(err)
 	}
 	defer nuke(runtime)
-	container, err := NewBuilder(runtime).Create(&Config{
+	container, err := runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"echo", "-n", "foobar"},
 	},
@@ -680,7 +570,7 @@ func TestRestartStdin(t *testing.T) {
 		t.Fatal(err)
 	}
 	defer nuke(runtime)
-	container, err := NewBuilder(runtime).Create(&Config{
+	container, err := runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"cat"},

@@ -759,10 +649,8 @@ func TestUser(t *testing.T) {
 	}
 	defer nuke(runtime)

-	builder := NewBuilder(runtime)
-
 	// Default user must be root
-	container, err := builder.Create(&Config{
+	container, err := runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"id"},
 	},
@@ -780,7 +668,7 @@ func TestUser(t *testing.T) {
 	}

 	// Set a username
-	container, err = builder.Create(&Config{
+	container, err = runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"id"},

@@ -800,7 +688,7 @@ func TestUser(t *testing.T) {
 	}

 	// Set a UID
-	container, err = builder.Create(&Config{
+	container, err = runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"id"},

@@ -820,7 +708,7 @@ func TestUser(t *testing.T) {
 	}

 	// Set a different user by uid
-	container, err = builder.Create(&Config{
+	container, err = runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"id"},

@@ -842,7 +730,7 @@ func TestUser(t *testing.T) {
 	}

 	// Set a different user by username
-	container, err = builder.Create(&Config{
+	container, err = runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"id"},

@@ -869,9 +757,7 @@ func TestMultipleContainers(t *testing.T) {
 	}
 	defer nuke(runtime)

-	builder := NewBuilder(runtime)
-
-	container1, err := builder.Create(&Config{
+	container1, err := runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"cat", "/dev/zero"},
 	},
@@ -881,7 +767,7 @@ func TestMultipleContainers(t *testing.T) {
 	}
 	defer runtime.Destroy(container1)

-	container2, err := builder.Create(&Config{
+	container2, err := runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"cat", "/dev/zero"},
 	},
@@ -927,7 +813,7 @@ func TestStdin(t *testing.T) {
 		t.Fatal(err)
 	}
 	defer nuke(runtime)
-	container, err := NewBuilder(runtime).Create(&Config{
+	container, err := runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"cat"},

@@ -974,7 +860,7 @@ func TestTty(t *testing.T) {
 		t.Fatal(err)
 	}
 	defer nuke(runtime)
-	container, err := NewBuilder(runtime).Create(&Config{
+	container, err := runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"cat"},

@@ -1021,7 +907,7 @@ func TestEnv(t *testing.T) {
 		t.Fatal(err)
 	}
 	defer nuke(runtime)
-	container, err := NewBuilder(runtime).Create(&Config{
+	container, err := runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"/usr/bin/env"},
 	},
@@ -1095,17 +981,12 @@ func TestLXCConfig(t *testing.T) {
 	memMin := 33554432
 	memMax := 536870912
 	mem := memMin + rand.Intn(memMax-memMin)
-	// CPU shares as well
-	cpuMin := 100
-	cpuMax := 10000
-	cpu := cpuMin + rand.Intn(cpuMax-cpuMin)
-	container, err := NewBuilder(runtime).Create(&Config{
+	container, err := runtime.Create(&Config{
 		Image: GetTestImage(runtime).Id,
 		Cmd:   []string{"/bin/true"},

-		Hostname:  "foobar",
-		Memory:    int64(mem),
-		CpuShares: int64(cpu),
+		Hostname: "foobar",
+		Memory:   int64(mem),
 	},
 	)
 	if err != nil {
@@ -1127,7 +1008,7 @@ func BenchmarkRunSequencial(b *testing.B) {
 	}
 	defer nuke(runtime)
 	for i := 0; i < b.N; i++ {
-		container, err := NewBuilder(runtime).Create(&Config{
+		container, err := runtime.Create(&Config{
 			Image: GetTestImage(runtime).Id,
 			Cmd:   []string{"echo", "-n", "foo"},
 		},
@@ -1162,7 +1043,7 @@ func BenchmarkRunParallel(b *testing.B) {
 		complete := make(chan error)
 		tasks = append(tasks, complete)
 		go func(i int, complete chan error) {
-			container, err := NewBuilder(runtime).Create(&Config{
+			container, err := runtime.Create(&Config{
 				Image: GetTestImage(runtime).Id,
 				Cmd:   []string{"echo", "-n", "foo"},
 			},
--- a/contrib/MAINTAINERS
+++ b/contrib/MAINTAINERS
@@ -1 +0,0 @@
-# Maintainer wanted! Enroll on #docker@freenode
--- a/contrib/crashTest.go
+++ b/contrib/crashTest.go
@@ -1,22 +1,17 @@
 package main

 import (
-	"fmt"
 	"io"
 	"log"
-	"net"
 	"os"
 	"os/exec"
-	"path"
 	"time"
 )

-var DOCKER_PATH string = path.Join(os.Getenv("DOCKERPATH"), "docker")
+const DOCKER_PATH = "/home/creack/dotcloud/docker/docker/docker"

-// WARNING: this crashTest will 1) crash your host, 2) remove all containers
 func runDaemon() (*exec.Cmd, error) {
 	os.Remove("/var/run/docker.pid")
-	exec.Command("rm", "-rf", "/var/lib/docker/containers").Run()
 	cmd := exec.Command(DOCKER_PATH, "-d")
 	outPipe, err := cmd.StdoutPipe()
 	if err != nil {
@@ -43,43 +38,19 @@ func crashTest() error {
 		return err
 	}

-	var endpoint string
-	if ep := os.Getenv("TEST_ENDPOINT"); ep == "" {
-		endpoint = "192.168.56.1:7979"
-	} else {
-		endpoint = ep
-	}
-
-	c := make(chan bool)
-	var conn io.Writer
-
-	go func() {
-		conn, _ = net.Dial("tcp", endpoint)
-		c <- false
-	}()
-	go func() {
-		time.Sleep(2 * time.Second)
-		c <- true
-	}()
-	<-c
-
-	restartCount := 0
-	totalTestCount := 1
 	for {
 		daemon, err := runDaemon()
 		if err != nil {
 			return err
 		}
-		restartCount++
 		//		time.Sleep(5000 * time.Millisecond)
 		var stop bool
 		go func() error {
 			stop = false
-			for i := 0; i < 100 && !stop; {
+			for i := 0; i < 100 && !stop; i++ {
 				func() error {
-					cmd := exec.Command(DOCKER_PATH, "run", "base", "echo", fmt.Sprintf("%d", totalTestCount))
-					i++
-					totalTestCount++
+					cmd := exec.Command(DOCKER_PATH, "run", "base", "echo", "hello", "world")
+					log.Printf("%d", i)
 					outPipe, err := cmd.StdoutPipe()
 					if err != nil {
 						return err
@@ -91,10 +62,9 @@ func crashTest() error {
 					if err := cmd.Start(); err != nil {
 						return err
 					}
-					if conn != nil {
-						go io.Copy(conn, outPipe)
-					}
-
+					go func() {
+						io.Copy(os.Stdout, outPipe)
+					}()
 					// Expecting error, do not check
 					inPipe.Write([]byte("hello world!!!!!\n"))
 					go inPipe.Write([]byte("hello world!!!!!\n"))
--- a/contrib/docker-build/MAINTAINERS
+++ b/contrib/docker-build/MAINTAINERS
@@ -1 +0,0 @@
-Solomon Hykes <solomon@dotcloud.com>
--- a/contrib/docker-build/docker-build
+++ b/contrib/docker-build/docker-build
@@ -49,39 +49,26 @@ def docker(args, stdin=None):
 def image_exists(img):
 	return docker(["inspect", img]).read().strip() != ""

-def image_config(img):
-	return json.loads(docker(["inspect", img]).read()).get("config", {})
-
-def run_and_commit(img_in, cmd, stdin=None, author=None, run=None):
+def run_and_commit(img_in, cmd, stdin=None):
 	run_id = docker(["run"] + (["-i", "-a", "stdin"] if stdin else ["-d"]) + [img_in, "/bin/sh", "-c", cmd], stdin=stdin).read().rstrip()
 	print "---> Waiting for " + run_id
 	result=int(docker(["wait", run_id]).read().rstrip())
 	if result != 0:
 		print "!!! '{}' return non-zero exit code '{}'. Aborting.".format(cmd, result)
 		sys.exit(1)
-	return docker(["commit"] + (["-author", author] if author else []) + (["-run", json.dumps(run)] if run is not None else []) + [run_id]).read().rstrip()
+	return docker(["commit", run_id]).read().rstrip()

-def insert(base, src, dst, author=None):
+def insert(base, src, dst):
 	print "COPY {} to {} in {}".format(src, dst, base)
 	if dst == "":
 		raise Exception("Missing destination path")
 	stdin = file(src)
 	stdin.seek(0)
-	return run_and_commit(base, "cat > {0}; chmod +x {0}".format(dst), stdin=stdin, author=author)
-
-def add(base, src, dst, author=None):
-	print "PUSH to {} in {}".format(dst, base)
-	if src == ".":
-		tar = subprocess.Popen(["tar", "-c", "."], stdout=subprocess.PIPE).stdout
-	else:
-		tar = subprocess.Popen(["curl", src], stdout=subprocess.PIPE).stdout
-	if dst == "":
-		raise Exception("Missing argument to push")
-	return run_and_commit(base, "mkdir -p '{0}' && tar -C '{0}' -x".format(dst), stdin=tar, author=author)
+	return run_and_commit(base, "cat > {0}; chmod +x {0}".format(dst), stdin=stdin)
+	

 def main():
 	base=""
-	maintainer=""
 	steps = []
 	try:
 		for line in sys.stdin.readlines():
@@ -89,48 +76,23 @@ def main():
 			# Skip comments and empty lines
 			if line == "" or line[0] == "#":
 				continue
-			op, param = line.split(None, 1)
-			print op.upper() + " " + param
+			op, param = line.split("	", 1)
 			if op == "from":
+				print "FROM " + param
 				base = param
 				steps.append(base)
-			elif op == "maintainer":
-				maintainer = param
 			elif op == "run":
-				result = run_and_commit(base, param, author=maintainer)
+				print "RUN " + param
+				result = run_and_commit(base, param)
 				steps.append(result)
 				base = result
 				print "===> " + base
 			elif op == "copy":
 				src, dst = param.split("	", 1)
-				result = insert(base, src, dst, author=maintainer)
+				result = insert(base, src, dst)
 				steps.append(result)
 				base = result
 				print "===> " + base
-			elif op == "add":
-				src, dst = param.split("	", 1)
-				result = add(base, src, dst, author=maintainer)
-				steps.append(result)
-				base=result
-				print "===> " + base
-			elif op == "expose":
-				config = image_config(base)
-				if config.get("PortSpecs") is None:
-					config["PortSpecs"] = []
-				portspec = param.strip()
-				config["PortSpecs"].append(portspec)
-				result = run_and_commit(base, "# (nop) expose port {}".format(portspec), author=maintainer, run=config)
-				steps.append(result)
-				base=result
-				print "===> " + base
-			elif op == "cmd":
-				config  = image_config(base)
-				cmd = list(json.loads(param))
-				config["Cmd"] = cmd
-				result = run_and_commit(base, "# (nop) set default command to '{}'".format(" ".join(cmd)), author=maintainer, run=config)
-				steps.append(result)
-				base=result
-				print "===> " + base
 			else:
 				print "Skipping uknown op " + op
 	except:
--- a/contrib/docker-build/example.changefile
+++ b/contrib/docker-build/example.changefile
@@ -1,13 +1,11 @@
 # Start build from a know base image
-maintainer	Solomon Hykes <solomon@dotcloud.com>
 from	base:ubuntu-12.10
 # Update ubuntu sources
 run	echo 'deb http://archive.ubuntu.com/ubuntu quantal main universe multiverse' > /etc/apt/sources.list
 run	apt-get update
 # Install system packages
 run	DEBIAN_FRONTEND=noninteractive apt-get install -y -q git
-run	DEBIAN_FRONTEND=noninteractive apt-get install -y -q curl
-run	DEBIAN_FRONTEND=noninteractive apt-get install -y -q golang
+run DEBIAN_FRONTEND=noninteractive apt-get install -y -q curl
+run DEBIAN_FRONTEND=noninteractive apt-get install -y -q golang
 # Insert files from the host (./myscript must be present in the current directory)
-copy	myscript	/usr/local/bin/myscript
-push	/src
+copy	myscript /usr/local/bin/myscript
--- a/contrib/docker-build/myscript
+++ b/contrib/docker-build/myscript
@@ -1,3 +0,0 @@
-#!/bin/sh
-
-echo hello, world!
--- a/contrib/install.sh
+++ b/contrib/install.sh
@@ -36,9 +36,9 @@ else
 fi

 echo "Downloading docker binary and uncompressing into /usr/local/bin..."
-curl -s http://get.docker.io/builds/$(uname -s)/$(uname -m)/docker-latest.tgz |
+curl -s http://get.docker.io/builds/$(uname -s)/$(uname -m)/docker-master.tgz |
 tar -C /usr/local/bin --strip-components=1 -zxf- \
-docker-latest/docker
+docker-master/docker

 if [ -f /etc/init/dockerd.conf ]
 then
--- a/contrib/mkimage-debian.sh
+++ b/contrib/mkimage-debian.sh
@@ -1,55 +0,0 @@
-#!/bin/bash
-set -e
-
-# these should match the names found at http://www.debian.org/releases/
-stableSuite='wheezy'
-testingSuite='jessie'
-unstableSuite='sid'
-
-variant='minbase'
-include='iproute,iputils-ping'
-
-repo="$1"
-suite="${2:-$stableSuite}"
-mirror="${3:-}" # stick to the default debootstrap mirror if one is not provided
-
-if [ ! "$repo" ]; then
-	echo >&2 "usage: $0 repo [suite [mirror]]"
-	echo >&2 "   ie: $0 tianon/debian squeeze"
-	exit 1
-fi
-
-target="/tmp/docker-rootfs-debian-$suite-$$-$RANDOM"
-
-cd "$(dirname "$(readlink -f "$BASH_SOURCE")")"
-returnTo="$(pwd -P)"
-
-set -x
-
-# bootstrap
-mkdir -p "$target"
-sudo debootstrap --verbose --variant="$variant" --include="$include" "$suite" "$target" "$mirror"
-
-cd "$target"
-
-# create the image
-img=$(sudo tar -c . | docker import -)
-
-# tag suite
-docker tag $img $repo $suite
-
-# test the image
-docker run -i -t $repo:$suite echo success
-
-if [ "$suite" = "$stableSuite" -o "$suite" = 'stable' ]; then
-	# tag latest
-	docker tag $img $repo latest
-	
-	# tag the specific debian release version
-	ver=$(docker run $repo:$suite cat /etc/debian_version)
-	docker tag $img $repo $ver
-fi
-
-# cleanup
-cd "$returnTo"
-sudo rm -rf "$target"
--- a/docker/docker.go
+++ b/docker/docker.go
@@ -4,13 +4,14 @@ import (
 	"flag"
 	"fmt"
 	"github.com/dotcloud/docker"
-	"github.com/dotcloud/docker/utils"
+	"github.com/dotcloud/docker/rcli"
+	"github.com/dotcloud/docker/term"
+	"io"
 	"io/ioutil"
 	"log"
 	"os"
 	"os/signal"
 	"strconv"
-	"strings"
 	"syscall"
 )

@@ -19,43 +20,22 @@ var (
 )

 func main() {
-	if utils.SelfPath() == "/sbin/init" {
+	if docker.SelfPath() == "/sbin/init" {
 		// Running in init mode
 		docker.SysInit()
 		return
 	}
-	host := "127.0.0.1"
-	port := 4243
 	// FIXME: Switch d and D ? (to be more sshd like)
 	flDaemon := flag.Bool("d", false, "Daemon mode")
 	flDebug := flag.Bool("D", false, "Debug mode")
-	flAutoRestart := flag.Bool("r", false, "Restart previously running containers")
 	bridgeName := flag.String("b", "", "Attach containers to a pre-existing network bridge")
 	pidfile := flag.String("p", "/var/run/docker.pid", "File containing process PID")
-	flHost := flag.String("H", fmt.Sprintf("%s:%d", host, port), "Host:port to bind/connect to")
 	flag.Parse()
 	if *bridgeName != "" {
 		docker.NetworkBridgeIface = *bridgeName
 	} else {
 		docker.NetworkBridgeIface = docker.DefaultNetworkBridge
 	}
-
-	if strings.Contains(*flHost, ":") {
-		hostParts := strings.Split(*flHost, ":")
-		if len(hostParts) != 2 {
-			log.Fatal("Invalid bind address format.")
-			os.Exit(-1)
-		}
-		if hostParts[0] != "" {
-			host = hostParts[0]
-		}
-		if p, err := strconv.Atoi(hostParts[1]); err == nil {
-			port = p
-		}
-	} else {
-		host = *flHost
-	}
-
 	if *flDebug {
 		os.Setenv("DEBUG", "1")
 	}
@@ -65,14 +45,12 @@ func main() {
 			flag.Usage()
 			return
 		}
-		if err := daemon(*pidfile, host, port, *flAutoRestart); err != nil {
+		if err := daemon(*pidfile); err != nil {
 			log.Fatal(err)
-			os.Exit(-1)
 		}
 	} else {
-		if err := docker.ParseCommands(host, port, flag.Args()...); err != nil {
+		if err := runCommand(flag.Args()); err != nil {
 			log.Fatal(err)
-			os.Exit(-1)
 		}
 	}
 }
@@ -104,10 +82,7 @@ func removePidFile(pidfile string) {
 	}
 }

-func daemon(pidfile, addr string, port int, autoRestart bool) error {
-	if addr != "127.0.0.1" {
-		log.Println("/!\\ DON'T BIND ON ANOTHER IP ADDRESS THAN 127.0.0.1 IF YOU DON'T KNOW WHAT YOU'RE DOING /!\\")
-	}
+func daemon(pidfile string) error {
 	if err := createPidFile(pidfile); err != nil {
 		log.Fatal(err)
 	}
@@ -122,10 +97,50 @@ func daemon(pidfile, addr string, port int, autoRestart bool) error {
 		os.Exit(0)
 	}()

-	server, err := docker.NewServer(autoRestart)
+	service, err := docker.NewServer()
 	if err != nil {
 		return err
 	}
-
-	return docker.ListenAndServe(fmt.Sprintf("%s:%d", addr, port), server, true)
+	return rcli.ListenAndServe("tcp", "127.0.0.1:4242", service)
+}
+
+func runCommand(args []string) error {
+	// FIXME: we want to use unix sockets here, but net.UnixConn doesn't expose
+	// CloseWrite(), which we need to cleanly signal that stdin is closed without
+	// closing the connection.
+	// See http://code.google.com/p/go/issues/detail?id=3345
+	if conn, err := rcli.Call("tcp", "127.0.0.1:4242", args...); err == nil {
+		options := conn.GetOptions()
+		if options.RawTerminal &&
+			term.IsTerminal(int(os.Stdin.Fd())) &&
+			os.Getenv("NORAW") == "" {
+			if oldState, err := rcli.SetRawTerminal(); err != nil {
+				return err
+			} else {
+				defer rcli.RestoreTerminal(oldState)
+			}
+		}
+		receiveStdout := docker.Go(func() error {
+			_, err := io.Copy(os.Stdout, conn)
+			return err
+		})
+		sendStdin := docker.Go(func() error {
+			_, err := io.Copy(conn, os.Stdin)
+			if err := conn.CloseWrite(); err != nil {
+				log.Printf("Couldn't send EOF: " + err.Error())
+			}
+			return err
+		})
+		if err := <-receiveStdout; err != nil {
+			return err
+		}
+		if !term.IsTerminal(int(os.Stdin.Fd())) {
+			if err := <-sendStdin; err != nil {
+				return err
+			}
+		}
+	} else {
+		return fmt.Errorf("Can't connect to docker daemon. Is 'docker -d' running on this host?")
+	}
+	return nil
 }
--- a/docs/MAINTAINERS
+++ b/docs/MAINTAINERS
@@ -1,2 +0,0 @@
-Andy Rothfusz <andy@dotcloud.com>
-Ken Cochrane <ken@dotcloud.com>
--- a/docs/Makefile
+++ b/docs/Makefile
@@ -6,7 +6,6 @@ SPHINXOPTS    =
 SPHINXBUILD   = sphinx-build
 PAPER         =
 BUILDDIR      = _build
-PYTHON        = python

 # Internal variables.
 PAPEROPT_a4     = -D latex_paper_size=a4
@@ -39,37 +38,38 @@ help:
 #	@echo "  linkcheck  to check all external links for integrity"
 #	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
 	@echo "  docs       to build the docs and copy the static files to the outputdir"
-	@echo "  server     to serve the docs in your browser under \`http://localhost:8000\`"
 	@echo "  publish    to publish the app to dotcloud"

 clean:
 	-rm -rf $(BUILDDIR)/*

 docs:
-	#-rm -rf $(BUILDDIR)/*
+	-rm -rf $(BUILDDIR)/*
 	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/html
+	cp sources/index.html $(BUILDDIR)/html/
+	cp -r sources/gettingstarted $(BUILDDIR)/html/
+	cp sources/dotcloud.yml $(BUILDDIR)/html/
+	cp sources/CNAME $(BUILDDIR)/html/
+	cp sources/.nojekyll $(BUILDDIR)/html/
+	cp sources/nginx.conf $(BUILDDIR)/html/
 	@echo
-	@echo "Build finished. The documentation pages are now in $(BUILDDIR)/html."
-
-server:
-	@cd $(BUILDDIR)/html; $(PYTHON) -m SimpleHTTPServer 8000
-
-site:
-	cp -r website $(BUILDDIR)/
-	cp -r theme/docker/static/ $(BUILDDIR)/website/
-	@echo
-	@echo "The Website pages are in $(BUILDDIR)/site."
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."

 connect:
-	@echo connecting dotcloud to www.docker.io website, make sure to use user 1
-	@cd _build/website/ ; \
-	dotcloud connect dockerwebsite ;
-	dotcloud list
+	@echo pushing changes to staging site
+	@cd _build/html/ ; \
+	@dotcloud list ; \
+	dotcloud connect dockerwebsite

 push:
-	@cd _build/website/ ; \
+	@cd _build/html/ ; \
 	dotcloud push

+github-deploy: docs
+	rm -fr github-deploy
+	git clone ssh://git@github.com/dotcloud/docker github-deploy
+	cd github-deploy && git checkout -f gh-pages && git rm -r * && rsync -avH ../_build/html/ ./ && touch .nojekyll && echo "docker.io" > CNAME && git add * && git commit -m "Updating docs"
+
 $(VERSIONS):
 	@echo "Hello world"

--- a/docs/README.md
+++ b/docs/README.md
@@ -14,22 +14,19 @@ Installation
 ------------

 * Work in your own fork of the code, we accept pull requests.
-* Install sphinx: `pip install sphinx`
-    * Mac OS X: `[sudo] pip-2.7 install sphinx`)
-* Install sphinx httpdomain contrib package: `pip install sphinxcontrib-httpdomain`
-    * Mac OS X: `[sudo] pip-2.7 install sphinxcontrib-httpdomain`
+* Install sphinx: ``pip install sphinx``
 * If pip is not available you can probably install it using your favorite package manager as **python-pip**

 Usage
 -----
-* Change the `.rst` files with your favorite editor to your liking.
-* Run `make docs` to clean up old files and generate new ones.
-* Your static website can now be found in the `_build` directory.
-* To preview what you have generated run `make server` and open <http://localhost:8000/> in your favorite browser.
+* change the .rst files with your favorite editor to your liking
+* run *make docs* to clean up old files and generate new ones
+* your static website can now be found in the _build dir
+* to preview what you have generated, cd into _build/html and then run 'python -m SimpleHTTPServer 8000'

-Working using GitHub's file editor
+Working using github's file editor
 ----------------------------------
-Alternatively, for small changes and typo's you might want to use GitHub's built in file editor. It allows
+Alternatively, for small changes and typo's you might want to use github's built in file editor. It allows
 you to preview your changes right online. Just be carefull not to create many commits.

 Images
@@ -74,4 +71,4 @@ Guides on using sphinx

 * Code examples

-  Start without $, so it's easy to copy and paste.
+  Start without $, so it's easy to copy and paste.
--- a/docs/requirements.txt
+++ b/docs/requirements.txt
@@ -1,2 +0,0 @@
-Sphinx==1.1.3
-sphinxcontrib-httpdomain==1.1.8
--- a/docs/sources/.nojekyll
+++ b/docs/sources/.nojekyll
--- a/docs/sources/CNAME
+++ b/docs/sources/CNAME
@@ -0,0 +1 @@
+docker.io
--- a/docs/sources/api/MAINTAINERS
+++ b/docs/sources/api/MAINTAINERS
@@ -1 +0,0 @@
-Solomon Hykes <solomon@dotcloud.com>
--- a/docs/sources/api/docker_remote_api.rst
+++ b/docs/sources/api/docker_remote_api.rst
--- a/docs/sources/api/index.rst
+++ b/docs/sources/api/index.rst
@@ -1,17 +0,0 @@
-:title: API Documentation
-:description: docker documentation
-:keywords: docker, ipa, documentation
-
-APIs
-====
-
-This following :
-
-.. toctree::
-  :maxdepth: 3
-
-  registry_api
-  index_search_api
-  docker_remote_api
-
-
--- a/docs/sources/api/index_search_api.rst
+++ b/docs/sources/api/index_search_api.rst
@@ -1,43 +0,0 @@
-:title: Docker Index documentation
-:description: Documentation for docker Index
-:keywords: docker, index, api
-
-
-=======================
-Docker Index Search API
-=======================
-
-Search
------
-
-.. http:get:: /v1/search
-
-   Search the Index given a search term. It accepts :http:method:`get` only.
-
-   **Example request**:
-
-   .. sourcecode:: http
-
-      GET /v1/search?q=search_term HTTP/1.1
-      Host: example.com
-      Accept: application/json
-
-   **Example response**:
-
-   .. sourcecode:: http
-
-      HTTP/1.1 200 OK
-      Vary: Accept
-      Content-Type: application/json
-
-      {"query":"search_term",
-        "num_results": 2,
-        "results" : [
-           {"name": "dotcloud/base", "description": "A base ubuntu64  image..."},
-           {"name": "base2", "description": "A base ubuntu64  image..."},
-         ]
-       }
-
-   :query q: what you want to search for
-   :statuscode 200: no error
-   :statuscode 500: server error
--- a/docs/sources/api/registry_api.rst
+++ b/docs/sources/api/registry_api.rst
@@ -1,477 +0,0 @@
-:title: Registry Documentation
-:description: Documentation for docker Registry and Registry API
-:keywords: docker, registry, api, index
-
-
-===================
-Docker Registry API
-===================
-
-.. contents:: Table of Contents
-
-1. The 3 roles
-===============
-
-1.1 Index
---------
-
-The Index is responsible for centralizing information about:
- User accounts
- Checksums of the images
- Public namespaces
-
-The Index has different components:
- Web UI
- Meta-data store (comments, stars, list public repositories)
- Authentication service
- Tokenization
-
-The index is authoritative for those information.
-
-We expect that there will be only one instance of the index, run and managed by dotCloud.
-
-1.2 Registry
------------
- It stores the images and the graph for a set of repositories
- It does not have user accounts data
- It has no notion of user accounts or authorization
- It delegates authentication and authorization to the Index Auth service using tokens
- It supports different storage backends (S3, cloud files, local FS)
- It doesn’t have a local database
- It will be open-sourced at some point
-
-We expect that there will be multiple registries out there. To help to grasp the context, here are some examples of registries:
-
- **sponsor registry**: such a registry is provided by a third-party hosting infrastructure as a convenience for their customers and the docker community as a whole. Its costs are supported by the third party, but the management and operation of the registry are supported by dotCloud. It features read/write access, and delegates authentication and authorization to the Index.
- **mirror registry**: such a registry is provided by a third-party hosting infrastructure but is targeted at their customers only. Some mechanism (unspecified to date) ensures that public images are pulled from a sponsor registry to the mirror registry, to make sure that the customers of the third-party provider can “docker pull” those images locally.
- **vendor registry**: such a registry is provided by a software vendor, who wants to distribute docker images. It would be operated and managed by the vendor. Only users authorized by the vendor would be able to get write access. Some images would be public (accessible for anyone), others private (accessible only for authorized users). Authentication and authorization would be delegated to the Index. The goal of vendor registries is to let someone do “docker pull basho/riak1.3” and automatically push from the vendor registry (instead of a sponsor registry); i.e. get all the convenience of a sponsor registry, while retaining control on the asset distribution.
- **private registry**: such a registry is located behind a firewall, or protected by an additional security layer (HTTP authorization, SSL client-side certificates, IP address authorization...). The registry is operated by a private entity, outside of dotCloud’s control. It can optionally delegate additional authorization to the Index, but it is not mandatory.
-
-.. note::
-
-    Mirror registries and private registries which do not use the Index don’t even need to run the registry code. They can be implemented by any kind of transport implementing HTTP GET and PUT. Read-only registries can be powered by a simple static HTTP server.
-
-.. note::
-
-    The latter implies that while HTTP is the protocol of choice for a registry, multiple schemes are possible (and in some cases, trivial):
-        - HTTP with GET (and PUT for read-write registries);
-        - local mount point;
-        - remote docker addressed through SSH.
-
-The latter would only require two new commands in docker, e.g. “registryget” and “registryput”, wrapping access to the local filesystem (and optionally doing consistency checks). Authentication and authorization are then delegated to SSH (e.g. with public keys).
-
-1.3 Docker
----------
-
-On top of being a runtime for LXC, Docker is the Registry client. It supports:
- Push / Pull on the registry
- Client authentication on the Index
-
-2. Workflow
-===========
-
-2.1 Pull
--------
-
-.. image:: /static_files/docker_pull_chart.png
-
-1. Contact the Index to know where I should download “samalba/busybox”
-2. Index replies:
-   a. “samalba/busybox” is on Registry A
-   b. here are the checksums for “samalba/busybox” (for all layers)
-   c. token
-3. Contact Registry A to receive the layers for “samalba/busybox” (all of them to the base image). Registry A is authoritative for “samalba/busybox” but keeps a copy of all inherited layers and serve them all from the same location.
-4. registry contacts index to verify if token/user is allowed to download images
-5. Index returns true/false lettings registry know if it should proceed or error out
-6. Get the payload for all layers
-
-It’s possible to run docker pull \https://<registry>/repositories/samalba/busybox. In this case, docker bypasses the Index. However the security is not guaranteed (in case Registry A is corrupted) because there won’t be any checksum checks.
-
-Currently registry redirects to s3 urls for downloads, going forward all downloads need to be streamed through the registry. The Registry will then abstract the calls to S3 by a top-level class which implements sub-classes for S3 and local storage.
-
-Token is only returned when the 'X-Docker-Token' header is sent with request.
-
-Basic Auth is required to pull private repos. Basic auth isn't required for pulling public repos, but if one is provided, it needs to be valid and for an active account.
-
-API (pulling repository foo/bar):
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-1. (Docker -> Index) GET /v1/repositories/foo/bar/images
-    **Headers**:
-        Authorization: Basic QWxhZGRpbjpvcGVuIHNlc2FtZQ==
-        X-Docker-Token: true
-    **Action**:
-        (looking up the foo/bar in db and gets images and checksums for that repo (all if no tag is specified, if tag, only checksums for those tags) see part 4.4.1)
-
-2. (Index -> Docker) HTTP 200 OK
-
-    **Headers**:
-        - Authorization: Token signature=123abc,repository=”foo/bar”,access=write
-        - X-Docker-Endpoints: registry.docker.io [, registry2.docker.io]
-    **Body**:
-        Jsonified checksums (see part 4.4.1)
-
-3. (Docker -> Registry) GET /v1/repositories/foo/bar/tags/latest
-    **Headers**:
-        Authorization: Token signature=123abc,repository=”foo/bar”,access=write
-
-4. (Registry -> Index) GET /v1/repositories/foo/bar/images
-
-    **Headers**:
-        Authorization: Token signature=123abc,repository=”foo/bar”,access=read
-
-    **Body**:
-        <ids and checksums in payload>
-
-    **Action**:
-        ( Lookup token see if they have access to pull.)
-
-        If good:
-            HTTP 200 OK
-            Index will invalidate the token
-        If bad:
-            HTTP 401 Unauthorized
-
-5. (Docker -> Registry) GET /v1/images/928374982374/ancestry
-    **Action**:
-        (for each image id returned in the registry, fetch /json + /layer)
-
-.. note::
-
-    If someone makes a second request, then we will always give a new token, never reuse tokens.
-
-2.2 Push
--------
-
-.. image:: /static_files/docker_push_chart.png
-
-1. Contact the index to allocate the repository name “samalba/busybox” (authentication required with user credentials)
-2. If authentication works and namespace available, “samalba/busybox” is allocated and a temporary token is returned (namespace is marked as initialized in index)
-3. Push the image on the registry (along with the token)
-4. Registry A contacts the Index to verify the token (token must corresponds to the repository name)
-5. Index validates the token. Registry A starts reading the stream pushed by docker and store the repository (with its images)
-6. docker contacts the index to give checksums for upload images
-
-.. note::
-
-    **It’s possible not to use the Index at all!** In this case, a deployed version of the Registry is deployed to store and serve images. Those images are not authentified and the security is not guaranteed.
-
-.. note::
-
-    **Index can be replaced!** For a private Registry deployed, a custom Index can be used to serve and validate token according to different policies.
-
-Docker computes the checksums and submit them to the Index at the end of the push. When a repository name does not have checksums on the Index, it means that the push is in progress (since checksums are submitted at the end).
-
-API (pushing repos foo/bar):
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-1. (Docker -> Index) PUT /v1/repositories/foo/bar/
-    **Headers**:
-        Authorization: Basic sdkjfskdjfhsdkjfh==
-        X-Docker-Token: true
-
-    **Action**::
-        - in index, we allocated a new repository, and set to initialized
-
-    **Body**::
-        (The body contains the list of images that are going to be pushed, with empty checksums. The checksums will be set at the end of the push)::
-
-        [{“id”: “9e89cc6f0bc3c38722009fe6857087b486531f9a779a0c17e3ed29dae8f12c4f”}]
-
-2. (Index -> Docker) 200 Created
-    **Headers**:
-        - WWW-Authenticate: Token signature=123abc,repository=”foo/bar”,access=write
-        - X-Docker-Endpoints: registry.docker.io [, registry2.docker.io]
-
-3. (Docker -> Registry) PUT /v1/images/98765432_parent/json
-    **Headers**:
-        Authorization: Token signature=123abc,repository=”foo/bar”,access=write
-
-4. (Registry->Index) GET /v1/repositories/foo/bar/images
-    **Headers**:
-        Authorization: Token signature=123abc,repository=”foo/bar”,access=write
-    **Action**::
-        - Index:
-            will invalidate the token.
-        - Registry:
-            grants a session (if token is approved) and fetches the images id
-
-5. (Docker -> Registry) PUT /v1/images/98765432_parent/json
-    **Headers**::
-        - Authorization: Token signature=123abc,repository=”foo/bar”,access=write
-        - Cookie: (Cookie provided by the Registry)
-
-6. (Docker -> Registry) PUT /v1/images/98765432/json
-    **Headers**:
-        Cookie: (Cookie provided by the Registry)
-
-7. (Docker -> Registry) PUT /v1/images/98765432_parent/layer
-    **Headers**:
-        Cookie: (Cookie provided by the Registry)
-
-8. (Docker -> Registry) PUT /v1/images/98765432/layer
-    **Headers**:
-        X-Docker-Checksum: sha256:436745873465fdjkhdfjkgh
-
-9. (Docker -> Registry) PUT /v1/repositories/foo/bar/tags/latest
-    **Headers**:
-        Cookie: (Cookie provided by the Registry)
-    **Body**:
-        “98765432”
-
-10. (Docker -> Index) PUT /v1/repositories/foo/bar/images
-
-    **Headers**:
-        Authorization: Basic 123oislifjsldfj==
-        X-Docker-Endpoints: registry1.docker.io (no validation on this right now)
-
-    **Body**:
-        (The image, id’s, tags and checksums)
-
-        [{“id”: “9e89cc6f0bc3c38722009fe6857087b486531f9a779a0c17e3ed29dae8f12c4f”,
-        “checksum”: “b486531f9a779a0c17e3ed29dae8f12c4f9e89cc6f0bc3c38722009fe6857087”}]
-
-    **Return** HTTP 204
-
-.. note::
-
-     If push fails and they need to start again, what happens in the index, there will already be a record for the namespace/name, but it will be initialized. Should we allow it, or mark as name already used? One edge case could be if someone pushes the same thing at the same time with two different shells.
-
-     If it's a retry on the Registry, Docker has a cookie (provided by the registry after token validation). So the Index won’t have to provide a new token.
-
-3. How to use the Registry in standalone mode
-=============================================
-
-The Index has two main purposes (along with its fancy social features):
-
- Resolve short names (to avoid passing absolute URLs all the time)
-   - username/projectname -> \https://registry.docker.io/users/<username>/repositories/<projectname>/
- Authenticate a user as a repos owner (for a central referenced repository)
-
-3.1 Without an Index
--------------------
-Using the Registry without the Index can be useful to store the images on a private network without having to rely on an external entity controlled by dotCloud.
-
-In this case, the registry will be launched in a special mode (--standalone? --no-index?). In this mode, the only thing which changes is that Registry will never contact the Index to verify a token. It will be the Registry owner responsibility to authenticate the user who pushes (or even pulls) an image using any mechanism (HTTP auth, IP based, etc...).
-
-In this scenario, the Registry is responsible for the security in case of data corruption since the checksums are not delivered by a trusted entity.
-
-As hinted previously, a standalone registry can also be implemented by any HTTP server handling GET/PUT requests (or even only GET requests if no write access is necessary).
-
-3.2 With an Index
-----------------
-
-The Index data needed by the Registry are simple:
- Serve the checksums
- Provide and authorize a Token
-
-In the scenario of a Registry running on a private network with the need of centralizing and authorizing, it’s easy to use a custom Index.
-
-The only challenge will be to tell Docker to contact (and trust) this custom Index. Docker will be configurable at some point to use a specific Index, it’ll be the private entity responsibility (basically the organization who uses Docker in a private environment) to maintain the Index and the Docker’s configuration among its consumers.
-
-4. The API
-==========
-
-The first version of the api is available here: https://github.com/jpetazzo/docker/blob/acd51ecea8f5d3c02b00a08176171c59442df8b3/docs/images-repositories-push-pull.md
-
-4.1 Images
----------
-
-The format returned in the images is not defined here (for layer and json), basically because Registry stores exactly the same kind of information as Docker uses to manage them.
-
-The format of ancestry is a line-separated list of image ids, in age order. I.e. the image’s parent is on the last line, the parent of the parent on the next-to-last line, etc.; if the image has no parent, the file is empty.
-
-GET /v1/images/<image_id>/layer
-PUT /v1/images/<image_id>/layer
-GET /v1/images/<image_id>/json
-PUT /v1/images/<image_id>/json
-GET /v1/images/<image_id>/ancestry
-PUT /v1/images/<image_id>/ancestry
-
-4.2 Users
---------
-
-4.2.1 Create a user (Index)
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-POST /v1/users
-
-**Body**:
-    {"email": "sam@dotcloud.com", "password": "toto42", "username": "foobar"'}
-
-**Validation**:
-    - **username** : min 4 character, max 30 characters, must match the regular expression [a-z0-9_].
-    - **password**: min 5 characters
-
-**Valid**: return HTTP 200
-
-Errors: HTTP 400 (we should create error codes for possible errors)
- invalid json
- missing field
- wrong format (username, password, email, etc)
- forbidden name
- name already exists
-
-.. note::
-
-    A user account will be valid only if the email has been validated (a validation link is sent to the email address).
-
-4.2.2 Update a user (Index)
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-PUT /v1/users/<username>
-
-**Body**:
-    {"password": "toto"}
-
-.. note::
-
-    We can also update email address, if they do, they will need to reverify their new email address.
-
-4.2.3 Login (Index)
-^^^^^^^^^^^^^^^^^^^
-Does nothing else but asking for a user authentication. Can be used to validate credentials. HTTP Basic Auth for now, maybe change in future.
-
-GET /v1/users
-
-**Return**:
-    - Valid: HTTP 200
-    - Invalid login: HTTP 401
-    - Account inactive: HTTP 403 Account is not Active
-
-4.3 Tags (Registry)
-------------------
-
-The Registry does not know anything about users. Even though repositories are under usernames, it’s just a namespace for the registry. Allowing us to implement organizations or different namespaces per user later, without modifying the Registry’s API.
-
-The following naming restrictions apply:
-
- Namespaces must match the same regular expression as usernames (See 4.2.1.)
- Repository names must match the regular expression [a-zA-Z0-9-_.]
-
-4.3.1 Get all tags
-^^^^^^^^^^^^^^^^^^
-
-GET /v1/repositories/<namespace>/<repository_name>/tags
-
-**Return**: HTTP 200
-    {
-    "latest": "9e89cc6f0bc3c38722009fe6857087b486531f9a779a0c17e3ed29dae8f12c4f",
-    “0.1.1”:  “b486531f9a779a0c17e3ed29dae8f12c4f9e89cc6f0bc3c38722009fe6857087”
-    }
-
-4.3.2 Read the content of a tag (resolve the image id)
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-GET /v1/repositories/<namespace>/<repo_name>/tags/<tag>
-
-**Return**:
-    "9e89cc6f0bc3c38722009fe6857087b486531f9a779a0c17e3ed29dae8f12c4f"
-
-4.3.3 Delete a tag (registry)
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-DELETE /v1/repositories/<namespace>/<repo_name>/tags/<tag>
-
-4.4 Images (Index)
------------------
-
-For the Index to “resolve” the repository name to a Registry location, it uses the X-Docker-Endpoints header. In other terms, this requests always add a “X-Docker-Endpoints” to indicate the location of the registry which hosts this repository.
-
-4.4.1 Get the images
-^^^^^^^^^^^^^^^^^^^^^
-
-GET /v1/repositories/<namespace>/<repo_name>/images
-
-**Return**: HTTP 200
-    [{“id”: “9e89cc6f0bc3c38722009fe6857087b486531f9a779a0c17e3ed29dae8f12c4f”, “checksum”: “md5:b486531f9a779a0c17e3ed29dae8f12c4f9e89cc6f0bc3c38722009fe6857087”}]
-
-
-4.4.2 Add/update the images
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-You always add images, you never remove them.
-
-PUT /v1/repositories/<namespace>/<repo_name>/images
-
-**Body**:
-    [ {“id”: “9e89cc6f0bc3c38722009fe6857087b486531f9a779a0c17e3ed29dae8f12c4f”, “checksum”: “sha256:b486531f9a779a0c17e3ed29dae8f12c4f9e89cc6f0bc3c38722009fe6857087”} ]
-
-**Return** 204
-
-5. Chaining Registries
-======================
-
-It’s possible to chain Registries server for several reasons:
- Load balancing
- Delegate the next request to another server
-
-When a Registry is a reference for a repository, it should host the entire images chain in order to avoid breaking the chain during the download.
-
-The Index and Registry use this mechanism to redirect on one or the other.
-
-Example with an image download:
-On every request, a special header can be returned:
-
-X-Docker-Endpoints: server1,server2
-
-On the next request, the client will always pick a server from this list.
-
-6. Authentication & Authorization
-=================================
-
-6.1 On the Index
-----------------
-
-The Index supports both “Basic” and “Token” challenges. Usually when there is a “401 Unauthorized”, the Index replies this::
-
-    401 Unauthorized
-    WWW-Authenticate: Basic realm="auth required",Token
-
-You have 3 options:
-
-1. Provide user credentials and ask for a token
-
-    **Header**:
-        - Authorization: Basic QWxhZGRpbjpvcGVuIHNlc2FtZQ==
-        - X-Docker-Token: true
-
-    In this case, along with the 200 response, you’ll get a new token (if user auth is ok):
-    If authorization isn't correct you get a 401 response.
-    If account isn't active you will get a 403 response.
-
-    **Response**:
-        - 200 OK
-        - X-Docker-Token: Token signature=123abc,repository=”foo/bar”,access=read
-
-2. Provide user credentials only
-
-    **Header**:
-        Authorization: Basic QWxhZGRpbjpvcGVuIHNlc2FtZQ==
-
-3. Provide Token
-
-    **Header**:
-        Authorization: Token signature=123abc,repository=”foo/bar”,access=read
-
-6.2 On the Registry
-------------------
-
-The Registry only supports the Token challenge::
-
-    401 Unauthorized
-    WWW-Authenticate: Token
-
-The only way is to provide a token on “401 Unauthorized” responses::
-
-    Authorization: Token signature=123abc,repository=”foo/bar”,access=read
-
-Usually, the Registry provides a Cookie when a Token verification succeeded. Every time the Registry passes a Cookie, you have to pass it back the same cookie.::
-
-    200 OK
-    Set-Cookie: session="wD/J7LqL5ctqw8haL10vgfhrb2Q=?foo=UydiYXInCnAxCi4=&timestamp=RjEzNjYzMTQ5NDcuNDc0NjQzCi4="; Path=/; HttpOnly
-
-Next request::
-
-    GET /(...)
-    Cookie: session="wD/J7LqL5ctqw8haL10vgfhrb2Q=?foo=UydiYXInCnAxCi4=&timestamp=RjEzNjYzMTQ5NDcuNDc0NjQzCi4="
--- a/docs/sources/commandline/basics.rst
+++ b/docs/sources/commandline/basics.rst
@@ -1,10 +1,10 @@
-:title: Basic Commands
+:title: Base commands
 :description: Common usage and commands
-:keywords: Examples, Usage, basic commands, docker, documentation, examples
+:keywords: Examples, Usage


-The Basics
-==========
+The basics
+=============

 Starting Docker
 ---------------
@@ -33,19 +33,6 @@ Running an interactive shell
  # allocate a tty, attach stdin and stdout
  docker run -i -t base /bin/bash

-Bind Docker to another host/port
--------------------------------
-
-If you want Docker to listen to another port and bind to another ip
-use -host and -port on both deamon and client
-
-.. code-block:: bash
-
-   # Run docker in daemon mode
-   sudo <path to>/docker -H 0.0.0.0:5555 &
-   # Download a base image
-   docker -H :5555 pull base
-

 Starting a long-running worker process
 --------------------------------------
@@ -89,8 +76,8 @@ Expose a service on a TCP port
  echo "Daemon received: $(docker logs $JOB)"


-Committing (saving) a container state
-------------------------------------
+Committing (saving) an image
+-----------------------------

 Save your containers state to a container image, so the state can be re-used.

--- a/docs/sources/commandline/cli.rst
+++ b/docs/sources/commandline/cli.rst
@@ -4,7 +4,7 @@

 .. _cli:

-Overview
+Command Line Interface
 ======================

 Docker Usage
@@ -14,8 +14,7 @@ To list available commands, either run ``docker`` with no parameters or execute
 ``docker help``::

  $ docker
-    Usage: docker [OPTIONS] COMMAND [arg...]
-      -H="127.0.0.1:4243": Host:port to bind/connect to
+    Usage: docker COMMAND [arg...]

    A self-sufficient runtime for linux containers.

@@ -25,10 +24,9 @@ Available Commands
 ~~~~~~~~~~~~~~~~~~

 .. toctree::
-   :maxdepth: 2
+   :maxdepth: 1

   command/attach
-   command/build
   command/commit
   command/diff
   command/export
@@ -48,7 +46,6 @@ Available Commands
   command/rm
   command/rmi
   command/run
-   command/search
   command/start
   command/stop
   command/tag
--- a/docs/sources/commandline/command/attach.rst
+++ b/docs/sources/commandline/command/attach.rst
@@ -1,7 +1,3 @@
-:title: Attach Command
-:description: Attach to a running container
-:keywords: attach, container, docker, documentation
-
 ===========================================
 ``attach`` -- Attach to a running container
 ===========================================
--- a/docs/sources/commandline/command/build.rst
+++ b/docs/sources/commandline/command/build.rst
@@ -1,28 +0,0 @@
-:title: Build Command
-:description: Build a new image from the Dockerfile passed via stdin
-:keywords: build, docker, container, documentation
-
-================================================
-``build`` -- Build a container from a Dockerfile
-================================================
-
-::
-
-    Usage: docker build [OPTIONS] PATH | -
-    Build a new container image from the source code at PATH
-      -t="": Tag to be applied to the resulting image in case of success.
-
-Examples
--------
-
-.. code-block:: bash
-
-    docker build .
-
-This will take the local Dockerfile
-
-.. code-block:: bash
-
-    docker build -
-
-This will read a Dockerfile form Stdin without context
--- a/docs/sources/commandline/command/commit.rst
+++ b/docs/sources/commandline/command/commit.rst
@@ -1,7 +1,3 @@
-:title: Commit Command
-:description: Create a new image from a container's changes
-:keywords: commit, docker, container, documentation
-
 ===========================================================
 ``commit`` -- Create a new image from a container's changes
 ===========================================================
@@ -13,20 +9,3 @@
    Create a new image from a container's changes

      -m="": Commit message
-      -author="": Author (eg. "John Hannibal Smith <hannibal@a-team.com>"
-      -run="": Config automatically applied when the image is run. "+`(ex: {"Cmd": ["cat", "/world"], "PortSpecs": ["22"]}')
-
-Full -run example::
-
-    {"Hostname": "",
-     "User": "",
-     "CpuShares": 0,
-     "Memory": 0,
-     "MemorySwap": 0,
-     "PortSpecs": ["22", "80", "443"],
-     "Tty": true,
-     "OpenStdin": true,
-     "StdinOnce": true,
-     "Env": ["FOO=BAR", "FOO2=BAR2"],
-     "Cmd": ["cat", "-e", "/etc/resolv.conf"],
-     "Dns": ["8.8.8.8", "8.8.4.4"]}
--- a/docs/sources/commandline/command/diff.rst
+++ b/docs/sources/commandline/command/diff.rst
@@ -1,7 +1,3 @@
-:title: Diff Command
-:description: Inspect changes on a container's filesystem
-:keywords: diff, docker, container, documentation
-
 =======================================================
 ``diff`` -- Inspect changes on a container's filesystem
 =======================================================
--- a/docs/sources/commandline/command/export.rst
+++ b/docs/sources/commandline/command/export.rst
@@ -1,7 +1,3 @@
-:title: Export Command
-:description: Export the contents of a filesystem as a tar archive
-:keywords: export, docker, container, documentation
-
 =================================================================
 ``export`` -- Stream the contents of a container as a tar archive
 =================================================================
--- a/docs/sources/commandline/command/history.rst
+++ b/docs/sources/commandline/command/history.rst
@@ -1,7 +1,3 @@
-:title: History Command
-:description: Show the history of an image
-:keywords: history, docker, container, documentation
-
 ===========================================
 ``history`` -- Show the history of an image
 ===========================================
--- a/docs/sources/commandline/command/images.rst
+++ b/docs/sources/commandline/command/images.rst
@@ -1,7 +1,3 @@
-:title: Images Command
-:description: List images
-:keywords: images, docker, container, documentation
-
 =========================
 ``images`` -- List images
 =========================
@@ -14,13 +10,3 @@

      -a=false: show all images
      -q=false: only show numeric IDs
-      -viz=false: output in graphviz format
-
-Displaying images visually
--------------------------
-
-::
-
-    docker images -viz | dot -Tpng -o docker.png
-
-.. image:: images/docker_images.gif
--- a/docs/sources/commandline/command/images/docker_images.gif
+++ b/docs/sources/commandline/command/images/docker_images.gif
--- a/docs/sources/commandline/command/import.rst
+++ b/docs/sources/commandline/command/import.rst
@@ -1,7 +1,3 @@
-:title: Import Command
-:description: Create a new filesystem image from the contents of a tarball
-:keywords: import, tarball, docker, url, documentation
-
 ==========================================================================
 ``import`` -- Create a new filesystem image from the contents of a tarball
 ==========================================================================
--- a/docs/sources/commandline/command/info.rst
+++ b/docs/sources/commandline/command/info.rst
@@ -1,7 +1,3 @@
-:title: Info Command
-:description: Display system-wide information.
-:keywords: info, docker, information, documentation
-
 ===========================================
 ``info`` -- Display system-wide information
 ===========================================
--- a/docs/sources/commandline/command/inspect.rst
+++ b/docs/sources/commandline/command/inspect.rst
@@ -1,7 +1,3 @@
-:title: Inspect Command
-:description: Return low-level information on a container
-:keywords: inspect, container, docker, documentation
-
 ==========================================================
 ``inspect`` -- Return low-level information on a container
 ==========================================================
--- a/docs/sources/commandline/command/kill.rst
+++ b/docs/sources/commandline/command/kill.rst
@@ -1,7 +1,3 @@
-:title: Kill Command
-:description: Kill a running container
-:keywords: kill, container, docker, documentation
-
 ====================================
 ``kill`` -- Kill a running container
 ====================================
--- a/docs/sources/commandline/command/login.rst
+++ b/docs/sources/commandline/command/login.rst
@@ -1,7 +1,3 @@
-:title: Login Command
-:description: Register or Login to the docker registry server
-:keywords: login, docker, documentation
-
 ============================================================
 ``login`` -- Register or Login to the docker registry server
 ============================================================
--- a/docs/sources/commandline/command/logs.rst
+++ b/docs/sources/commandline/command/logs.rst
@@ -1,7 +1,3 @@
-:title: Logs Command
-:description: Fetch the logs of a container
-:keywords: logs, container, docker, documentation
-
 =========================================
 ``logs`` -- Fetch the logs of a container
 =========================================
--- a/docs/sources/commandline/command/port.rst
+++ b/docs/sources/commandline/command/port.rst
@@ -1,7 +1,3 @@
-:title: Port Command
-:description: Lookup the public-facing port which is NAT-ed to PRIVATE_PORT
-:keywords: port, docker, container, documentation
-
 =========================================================================
 ``port`` -- Lookup the public-facing port which is NAT-ed to PRIVATE_PORT
 =========================================================================
--- a/docs/sources/commandline/command/ps.rst
+++ b/docs/sources/commandline/command/ps.rst
@@ -1,7 +1,3 @@
-:title: Ps Command
-:description: List containers
-:keywords: ps, docker, documentation, container
-
 =========================
 ``ps`` -- List containers
 =========================
--- a/docs/sources/commandline/command/pull.rst
+++ b/docs/sources/commandline/command/pull.rst
@@ -1,7 +1,3 @@
-:title: Pull Command
-:description: Pull an image or a repository from the registry
-:keywords: pull, image, repo, repository, documentation, docker
-
 =========================================================================
 ``pull`` -- Pull an image or a repository from the docker registry server
 =========================================================================
--- a/docs/sources/commandline/command/push.rst
+++ b/docs/sources/commandline/command/push.rst
@@ -1,7 +1,3 @@
-:title: Push Command
-:description: Push an image or a repository to the registry
-:keywords: push, docker, image, repository, documentation, repo
-
 =======================================================================
 ``push`` -- Push an image or a repository to the docker registry server
 =======================================================================
--- a/docs/sources/commandline/command/restart.rst
+++ b/docs/sources/commandline/command/restart.rst
@@ -1,7 +1,3 @@
-:title: Restart Command
-:description: Restart a running container
-:keywords: restart, container, docker, documentation
-
 ==========================================
 ``restart`` -- Restart a running container
 ==========================================
--- a/docs/sources/commandline/command/rm.rst
+++ b/docs/sources/commandline/command/rm.rst
@@ -1,7 +1,3 @@
-:title: Rm Command
-:description: Remove a container
-:keywords: remove, container, docker, documentation, rm
-
 ============================
 ``rm`` -- Remove a container
 ============================
--- a/docs/sources/commandline/command/rmi.rst
+++ b/docs/sources/commandline/command/rmi.rst
@@ -1,7 +1,3 @@
-:title: Rmi Command
-:description: Remove an image
-:keywords: rmi, remove, image, docker, documentation
-
 ==========================
 ``rmi`` -- Remove an image
 ==========================
--- a/docs/sources/commandline/command/run.rst
+++ b/docs/sources/commandline/command/run.rst
@@ -1,7 +1,3 @@
-:title: Run Command
-:description: Run a command in a new container
-:keywords: run, container, docker, documentation 
-
 ===========================================
 ``run`` -- Run a command in a new container
 ===========================================
@@ -13,7 +9,6 @@
    Run a command in a new container

      -a=map[]: Attach to stdin, stdout or stderr.
-      -c=0: CPU shares (relative weight)
      -d=false: Detached mode: leave the container running in the background
      -e=[]: Set environment variables
      -h="": Container host name
@@ -22,6 +17,3 @@
      -p=[]: Map a network port to the container
      -t=false: Allocate a pseudo-tty
      -u="": Username or UID
-      -d=[]: Set custom dns servers for the container
-      -v=[]: Creates a new volume and mounts it at the specified path.
-      -volumes-from="": Mount all volumes from the given container.
--- a/docs/sources/commandline/command/search.rst
+++ b/docs/sources/commandline/command/search.rst
@@ -1,14 +0,0 @@
-:title: Search Command
-:description: Searches for the TERM parameter on the Docker index and prints out a list of repositories that match.
-:keywords: search, docker, image, documentation 
-
-===================================================================
-``search`` -- Search for an image in the docker index
-===================================================================
-
-::
-
-    Usage: docker search TERM
-
-    Searches for the TERM parameter on the Docker index and prints out a list of repositories
-    that match.
--- a/docs/sources/commandline/command/start.rst
+++ b/docs/sources/commandline/command/start.rst
@@ -1,7 +1,3 @@
-:title: Start Command
-:description: Start a stopped container
-:keywords: start, docker, container, documentation
-
 ======================================
 ``start`` -- Start a stopped container
 ======================================
--- a/docs/sources/commandline/command/stop.rst
+++ b/docs/sources/commandline/command/stop.rst
@@ -1,7 +1,3 @@
-:title: Stop Command
-:description: Stop a running container
-:keywords: stop, container, docker, documentation
-
 ====================================
 ``stop`` -- Stop a running container
 ====================================
--- a/docs/sources/commandline/command/tag.rst
+++ b/docs/sources/commandline/command/tag.rst
@@ -1,7 +1,3 @@
-:title: Tag Command
-:description: Tag an image into a repository
-:keywords: tag, docker, image, repository, documentation, repo
-
 =========================================
 ``tag`` -- Tag an image into a repository
 =========================================
--- a/docs/sources/commandline/command/version.rst
+++ b/docs/sources/commandline/command/version.rst
@@ -1,7 +1,3 @@
-:title: Version Command
-:description: 
-:keywords: version, docker, documentation
-
 ==================================================
 ``version`` -- Show the docker version information
 ==================================================
--- a/docs/sources/commandline/command/wait.rst
+++ b/docs/sources/commandline/command/wait.rst
@@ -1,7 +1,3 @@
-:title: Wait Command
-:description: Block until a container stops, then print its exit code.
-:keywords: wait, docker, container, documentation
-
 ===================================================================
 ``wait`` -- Block until a container stops, then print its exit code
 ===================================================================
--- a/docs/sources/commandline/index.rst
+++ b/docs/sources/commandline/index.rst
@@ -1,6 +1,6 @@
-:title: Commands
+:title: docker documentation
 :description: -- todo: change me
-:keywords: todo, commands, command line, help, docker, documentation
+:keywords: todo: change me


 Commands
@@ -9,33 +9,8 @@ Commands
 Contents:

 .. toctree::
-  :maxdepth: 1
+  :maxdepth: 2

-  cli
-  attach  <command/attach>
-  build   <command/build>
-  commit  <command/commit>
-  diff    <command/diff>
-  export  <command/export>
-  history <command/history>
-  images  <command/images>
-  import  <command/import>
-  info    <command/info>
-  inspect <command/inspect>
-  kill    <command/kill>
-  login   <command/login>
-  logs    <command/logs>
-  port    <command/port>
-  ps      <command/ps>
-  pull    <command/pull>
-  push    <command/push>
-  restart <command/restart>
-  rm      <command/rm>
-  rmi     <command/rmi>
-  run     <command/run>
-  search  <command/search>
-  start   <command/start>
-  stop    <command/stop>
-  tag     <command/tag>
-  version <command/version>
-  wait    <command/wait>
+  basics
+  workingwithrepository
+  cli
--- a/docs/sources/commandline/workingwithrepository.rst
+++ b/docs/sources/commandline/workingwithrepository.rst
@@ -0,0 +1,42 @@
+.. _working_with_the_repository:
+
+Working with the repository
+============================
+
+Connecting to the repository
+----------------------------
+
+You create a user on the central docker repository by running
+
+.. code-block:: bash
+
+    docker login
+
+
+If your username does not exist it will prompt you to also enter a password and your e-mail address. It will then
+automatically log you in.
+
+
+Committing a container to a named image
+---------------------------------------
+
+In order to commit to the repository it is required to have committed your container to an image with your namespace.
+
+.. code-block:: bash
+
+    # for example docker commit $CONTAINER_ID dhrp/kickassapp
+    docker commit <container_id> <your username>/<some_name>
+
+
+Pushing a container to the repository
+-----------------------------------------
+
+In order to push an image to the repository you need to have committed your container to a named image (see above)
+
+Now you can commit this image to the repository
+
+.. code-block:: bash
+
+    # for example docker push dhrp/kickassapp
+    docker push <image-name>
+
--- a/docs/sources/concepts/buildingblocks.rst
+++ b/docs/sources/concepts/buildingblocks.rst
@@ -0,0 +1,25 @@
+:title: Building blocks
+:description: An introduction to docker and standard containers?
+:keywords: containers, lxc, concepts, explanation
+
+
+Building blocks
+===============
+
+.. _images:
+
+Images
+------
+An original container image. These are stored on disk and are comparable with what you normally expect from a stopped virtual machine image. Images are stored (and retrieved from) repository
+
+Images are stored on your local file system under /var/lib/docker/images
+
+
+.. _containers:
+
+Containers
+----------
+A container is a local version of an image. It can be running or stopped, The equivalent would be a virtual machine instance.
+
+Containers are stored on your local file system under /var/lib/docker/containers
+
--- a/docs/sources/concepts/containers.rst
+++ b/docs/sources/concepts/containers.rst
@@ -1,8 +1,128 @@
 :title: Introduction
 :description: An introduction to docker and standard containers?
-:keywords: containers, lxc, concepts, explanation, docker, documentation
+:keywords: containers, lxc, concepts, explanation


 :note: This version of the introduction is temporary, just to make sure we don't break the links from the website when the documentation is updated

-This document has been moved to  :ref:`introduction`, please update your bookmarks.
+
+Introduction
+============
+
+Docker - The Linux container runtime
+------------------------------------
+
+Docker complements LXC with a high-level API which operates at the process level. It runs unix processes with strong guarantees of isolation and repeatability across servers.
+
+Docker is a great building block for automating distributed systems: large-scale web deployments, database clusters, continuous deployment systems, private PaaS, service-oriented architectures, etc.
+
+
+- **Heterogeneous payloads** Any combination of binaries, libraries, configuration files, scripts, virtualenvs, jars, gems, tarballs, you name it. No more juggling between domain-specific tools. Docker can deploy and run them all.
+- **Any server** Docker can run on any x64 machine with a modern linux kernel - whether it's a laptop, a bare metal server or a VM. This makes it perfect for multi-cloud deployments.
+- **Isolation** docker isolates processes from each other and from the underlying host, using lightweight containers.
+- **Repeatability** Because containers are isolated in their own filesystem, they behave the same regardless of where, when, and alongside what they run.
+
+
+
+What is a Standard Container?
+-----------------------------
+
+Docker defines a unit of software delivery called a Standard Container. The goal of a Standard Container is to encapsulate a software component and all its dependencies in
+a format that is self-describing and portable, so that any compliant runtime can run it without extra dependency, regardless of the underlying machine and the contents of the container.
+
+The spec for Standard Containers is currently work in progress, but it is very straightforward. It mostly defines 1) an image format, 2) a set of standard operations, and 3) an execution environment.
+
+A great analogy for this is the shipping container. Just like Standard Containers are a fundamental unit of software delivery, shipping containers (http://bricks.argz.com/ins/7823-1/12) are a fundamental unit of physical delivery.
+
+Standard operations
+~~~~~~~~~~~~~~~~~~~
+
+Just like shipping containers, Standard Containers define a set of STANDARD OPERATIONS. Shipping containers can be lifted, stacked, locked, loaded, unloaded and labelled. Similarly, standard containers can be started, stopped, copied, snapshotted, downloaded, uploaded and tagged.
+
+
+Content-agnostic
+~~~~~~~~~~~~~~~~~~~
+
+Just like shipping containers, Standard Containers are CONTENT-AGNOSTIC: all standard operations have the same effect regardless of the contents. A shipping container will be stacked in exactly the same way whether it contains Vietnamese powder coffee or spare Maserati parts. Similarly, Standard Containers are started or uploaded in the same way whether they contain a postgres database, a php application with its dependencies and application server, or Java build artifacts.
+
+
+Infrastructure-agnostic
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Both types of containers are INFRASTRUCTURE-AGNOSTIC: they can be transported to thousands of facilities around the world, and manipulated by a wide variety of equipment. A shipping container can be packed in a factory in Ukraine, transported by truck to the nearest routing center, stacked onto a train, loaded into a German boat by an Australian-built crane, stored in a warehouse at a US facility, etc. Similarly, a standard container can be bundled on my laptop, uploaded to S3, downloaded, run and snapshotted by a build server at Equinix in Virginia, uploaded to 10 staging servers in a home-made Openstack cluster, then sent to 30 production instances across 3 EC2 regions.
+
+
+Designed for automation
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Because they offer the same standard operations regardless of content and infrastructure, Standard Containers, just like their physical counterpart, are extremely well-suited for automation. In fact, you could say automation is their secret weapon.
+
+Many things that once required time-consuming and error-prone human effort can now be programmed. Before shipping containers, a bag of powder coffee was hauled, dragged, dropped, rolled and stacked by 10 different people in 10 different locations by the time it reached its destination. 1 out of 50 disappeared. 1 out of 20 was damaged. The process was slow, inefficient and cost a fortune - and was entirely different depending on the facility and the type of goods.
+
+Similarly, before Standard Containers, by the time a software component ran in production, it had been individually built, configured, bundled, documented, patched, vendored, templated, tweaked and instrumented by 10 different people on 10 different computers. Builds failed, libraries conflicted, mirrors crashed, post-it notes were lost, logs were misplaced, cluster updates were half-broken. The process was slow, inefficient and cost a fortune - and was entirely different depending on the language and infrastructure provider.
+
+
+Industrial-grade delivery
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+There are 17 million shipping containers in existence, packed with every physical good imaginable. Every single one of them can be loaded on the same boats, by the same cranes, in the same facilities, and sent anywhere in the World with incredible efficiency. It is embarrassing to think that a 30 ton shipment of coffee can safely travel half-way across the World in *less time* than it takes a software team to deliver its code from one datacenter to another sitting 10 miles away.
+
+With Standard Containers we can put an end to that embarrassment, by making INDUSTRIAL-GRADE DELIVERY of software a reality.
+
+
+Standard Container Specification
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+(TODO)
+
+Image format
+~~~~~~~~~~~~
+
+Standard operations
+~~~~~~~~~~~~~~~~~~~
+
+-  Copy
+-  Run
+-  Stop
+-  Wait
+-  Commit
+-  Attach standard streams
+-  List filesystem changes
+-  ...
+
+Execution environment
+~~~~~~~~~~~~~~~~~~~~~
+
+Root filesystem
+^^^^^^^^^^^^^^^
+
+Environment variables
+^^^^^^^^^^^^^^^^^^^^^
+
+Process arguments
+^^^^^^^^^^^^^^^^^
+
+Networking
+^^^^^^^^^^
+
+Process namespacing
+^^^^^^^^^^^^^^^^^^^
+
+Resource limits
+^^^^^^^^^^^^^^^
+
+Process monitoring
+^^^^^^^^^^^^^^^^^^
+
+Logging
+^^^^^^^
+
+Signals
+^^^^^^^
+
+Pseudo-terminal allocation
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Security
+^^^^^^^^
+
--- a/docs/sources/concepts/index.rst
+++ b/docs/sources/concepts/index.rst
@@ -1,6 +1,6 @@
-:title: Concepts
+:title: docker documentation
 :description: -- todo: change me
-:keywords: concepts, documentation, docker, containers
+:keywords: todo: change me



@@ -12,5 +12,6 @@ Contents:
 .. toctree::
   :maxdepth: 1

-   ../index
+   introduction
+   buildingblocks

--- a/docs/sources/concepts/introduction.rst
+++ b/docs/sources/concepts/introduction.rst
@@ -2,11 +2,13 @@
 :description: An introduction to docker and standard containers?
 :keywords: containers, lxc, concepts, explanation

+
+
 Introduction
 ============

-Docker -- The Linux container runtime
-------------------------------------
+Docker - The Linux container runtime
+------------------------------------

 Docker complements LXC with a high-level API which operates at the process level. It runs unix processes with strong guarantees of isolation and repeatability across servers.

@@ -18,7 +20,7 @@ Docker is a great building block for automating distributed systems: large-scale
 - **Isolation** docker isolates processes from each other and from the underlying host, using lightweight containers.
 - **Repeatability** Because containers are isolated in their own filesystem, they behave the same regardless of where, when, and alongside what they run.

-.. image:: images/lego_docker.jpg
+.. image:: http://www.docker.io/_static/lego_docker.jpg


 What is a Standard Container?
--- a/docs/sources/conf.py
+++ b/docs/sources/conf.py
@@ -25,7 +25,7 @@ import sys, os

 # Add any Sphinx extension module names here, as strings. They can be extensions
 # coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
-extensions = ['sphinxcontrib.httpdomain']
+extensions = []

 # Add any paths that contain templates here, relative to this directory.
 templates_path = ['_templates']
@@ -41,7 +41,7 @@ html_add_permalinks = None


 # The master toctree document.
-master_doc = 'toctree'
+master_doc = 'index'

 # General information about the project.
 project = u'Docker'
--- a/docs/sources/contributing/contributing.rst
+++ b/docs/sources/contributing/contributing.rst
@@ -1,9 +1,101 @@
-:title: Contribution Guidelines
-:description: Contribution guidelines: create issues, convetions, pull requests
-:keywords: contributing, docker, documentation, help, guideline
-
 Contributing to Docker
 ======================

-Want to hack on Docker? Awesome! The repository includes `all the instructions you need to get started <https://github.com/dotcloud/docker/blob/master/CONTRIBUTING.md>`.
+Want to hack on Docker? Awesome! There are instructions to get you
+started on the website: http://docker.io/gettingstarted.html

+They are probably not perfect, please let us know if anything feels
+wrong or incomplete.
+
+Contribution guidelines
+-----------------------
+
+Pull requests are always welcome
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+We are always thrilled to receive pull requests, and do our best to
+process them as fast as possible. Not sure if that typo is worth a pull
+request? Do it! We will appreciate it.
+
+If your pull request is not accepted on the first try, don't be
+discouraged! If there's a problem with the implementation, hopefully you
+received feedback on what to improve.
+
+We're trying very hard to keep Docker lean and focused. We don't want it
+to do everything for everybody. This means that we might decide against
+incorporating a new feature. However, there might be a way to implement
+that feature *on top of* docker.
+
+Discuss your design on the mailing list
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+We recommend discussing your plans `on the mailing
+list <https://groups.google.com/forum/?fromgroups#!forum/docker-club>`__
+before starting to code - especially for more ambitious contributions.
+This gives other contributors a chance to point you in the right
+direction, give feedback on your design, and maybe point out if someone
+else is working on the same thing.
+
+Create issues...
+~~~~~~~~~~~~~~~~
+
+Any significant improvement should be documented as `a github
+issue <https://github.com/dotcloud/docker/issues>`__ before anybody
+starts working on it.
+
+...but check for existing issues first!
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Please take a moment to check that an issue doesn't already exist
+documenting your bug report or improvement proposal. If it does, it
+never hurts to add a quick "+1" or "I have this problem too". This will
+help prioritize the most common problems and requests.
+
+Conventions
+~~~~~~~~~~~
+
+Fork the repo and make changes on your fork in a feature branch:
+
+- If it's a bugfix branch, name it XXX-something where XXX is the number of the
+  issue
+- If it's a feature branch, create an enhancement issue to announce your
+  intentions, and name it XXX-something where XXX is the number of the issue.
+
+Submit unit tests for your changes.  Go has a great test framework built in; use
+it! Take a look at existing tests for inspiration. Run the full test suite on
+your branch before submitting a pull request.
+
+Make sure you include relevant updates or additions to documentation when
+creating or modifying features.
+
+Write clean code. Universally formatted code promotes ease of writing, reading,
+and maintenance. Always run ``go fmt`` before committing your changes. Most
+editors have plugins that do this automatically, and there's also a git
+pre-commit hook:
+
+.. code-block:: bash
+
+    curl -o .git/hooks/pre-commit https://raw.github.com/edsrzf/gofmt-git-hook/master/fmt-check && chmod +x .git/hooks/pre-commit
+
+
+Pull requests descriptions should be as clear as possible and include a
+reference to all the issues that they address.
+
+Code review comments may be added to your pull request. Discuss, then make the
+suggested modifications and push additional commits to your feature branch. Be
+sure to post a comment after pushing. The new commits will show up in the pull
+request automatically, but the reviewers will not be notified unless you
+comment.
+
+Before the pull request is merged, make sure that you squash your commits into
+logical units of work using ``git rebase -i`` and ``git push -f``. After every
+commit the test suite should be passing. Include documentation changes in the
+same commit so that a revert would remove all traces of the feature or fix.
+
+Commits that fix or close an issue should include a reference like ``Closes #XXX``
+or ``Fixes #XXX``, which will automatically close the issue when merged.
+
+Add your name to the AUTHORS file, but make sure the list is sorted and your
+name and email address match your git configuration. The AUTHORS file is
+regenerated occasionally from the git commit history, so a mismatch may result
+in your changes being overwritten.
--- a/docs/sources/contributing/devenvironment.rst
+++ b/docs/sources/contributing/devenvironment.rst
@@ -1,8 +1,8 @@
-:title: Setting Up a Dev Environment
+:title: Setting up a dev environment
 :description: Guides on how to contribute to docker
 :keywords: Docker, documentation, developers, contributing, dev environment

-Setting Up a Dev Environment
+Setting up a dev environment
 ============================

 Instructions that have been verified to work on Ubuntu 12.10,
@@ -16,7 +16,7 @@ Instructions that have been verified to work on Ubuntu 12.10,

    mkdir -p $GOPATH/src/github.com/dotcloud
    cd $GOPATH/src/github.com/dotcloud
-    git clone git://github.com/dotcloud/docker.git
+    git clone git@github.com:dotcloud/docker.git
    cd docker

    go get -v github.com/dotcloud/docker/...
--- a/docs/sources/dotcloud.yml
+++ b/docs/sources/dotcloud.yml
--- a/docs/sources/examples/couchdb_data_volumes.rst
+++ b/docs/sources/examples/couchdb_data_volumes.rst
@@ -1,53 +0,0 @@
-:title: Sharing data between 2 couchdb databases
-:description: Sharing data between 2 couchdb databases
-:keywords: docker, example, package installation, networking, couchdb, data volumes
-
-.. _running_couchdb_service:
-
-CouchDB Service
-===============
-
-.. include:: example_header.inc
-
-Here's an example of using data volumes to share the same data between 2 couchdb containers.
-This could be used for hot upgrades, testing different versions of couchdb on the same data, etc.
-
-Create first database
---------------------
-
-Note that we're marking /var/lib/couchdb as a data volume.
-
-.. code-block:: bash
-
-    COUCH1=$(docker run -d -v /var/lib/couchdb shykes/couchdb:2013-05-03)
-
-Add data to the first database
------------------------------
-
-We're assuming your docker host is reachable at `localhost`. If not, replace `localhost` with the public IP of your docker host.
-
-.. code-block:: bash
-
-    HOST=localhost
-    URL="http://$HOST:$(docker port $COUCH1 5984)/_utils/"
-    echo "Navigate to $URL in your browser, and use the couch interface to add data"
-
-Create second database
----------------------
-
-This time, we're requesting shared access to $COUCH1's volumes.
-
-.. code-block:: bash
-
-    COUCH2=$(docker run -d -volumes-from $COUCH1) shykes/couchdb:2013-05-03)
-
-Browse data on the second database
----------------------------------
-
-.. code-block:: bash
-
-    HOST=localhost
-    URL="http://$HOST:$(docker port $COUCH2 5984)/_utils/"
-    echo "Navigate to $URL in your browser. You should see the same data as in the first database!"
-
-Congratulations, you are running 2 Couchdb containers, completely isolated from each other *except* for their data.
--- a/docs/sources/examples/index.rst
+++ b/docs/sources/examples/index.rst
@@ -1,6 +1,6 @@
 :title: Docker Examples
 :description: Examples on how to use Docker
-:keywords: docker, hello world, node, nodejs, python, couch, couchdb, redis, ssh, sshd, examples
+:keywords: docker, hello world, examples



@@ -16,7 +16,5 @@ Contents:
   hello_world
   hello_world_daemon
   python_web_app
-   nodejs_web_app
   running_redis_service
   running_ssh_service
-   couchdb_data_volumes
--- a/docs/sources/examples/nodejs_web_app.rst
+++ b/docs/sources/examples/nodejs_web_app.rst
@@ -1,236 +0,0 @@
-:title: Running a Node.js app on CentOS
-:description: Installing and running a Node.js app on CentOS
-:keywords: docker, example, package installation, node, centos
-
-.. _nodejs_web_app:
-
-Node.js Web App
-===============
-
-.. include:: example_header.inc
-
-The goal of this example is to show you how you can build your own docker images
-from a parent image using a ``Dockerfile`` . We will do that by making a simple
-Node.js hello world web application running on CentOS. You can get the full
-source code at https://github.com/gasi/docker-node-hello.
-
-Create Node.js app
-++++++++++++++++++
-
-First, create a ``package.json`` file that describes your app and its
-dependencies:
-
-.. code-block:: json
-
-    {
-      "name": "docker-centos-hello",
-      "private": true,
-      "version": "0.0.1",
-      "description": "Node.js Hello World app on CentOS using docker",
-      "author": "Daniel Gasienica <daniel@gasienica.ch>",
-      "dependencies": {
-        "express": "3.2.4"
-      }
-    }
-
-Then, create an ``index.js`` file that defines a web app using the
-`Express.js <http://expressjs.com/>`_ framework:
-
-.. code-block:: javascript
-
-    var express = require('express');
-
-    // Constants
-    var PORT = 8080;
-
-    // App
-    var app = express();
-    app.get('/', function (req, res) {
-      res.send('Hello World\n');
-    });
-
-    app.listen(PORT)
-    console.log('Running on http://localhost:' + PORT);
-
-
-In the next steps, we’ll look at how you can run this app inside a CentOS
-container using docker. First, you’ll need to build a docker image of your app.
-
-Creating a ``Dockerfile``
-+++++++++++++++++++++++++
-
-Create an empty file called ``Dockerfile``:
-
-.. code-block:: bash
-
-    touch Dockerfile
-
-Open the ``Dockerfile`` in your favorite text editor and add the following line
-that defines the version of docker the image requires to build
-(this example uses docker 0.3.4):
-
-.. code-block:: bash
-
-    # DOCKER-VERSION 0.3.4
-
-Next, define the parent image you want to use to build your own image on top of.
-Here, we’ll use `CentOS <https://index.docker.io/_/centos/>`_ (tag: ``6.4``)
-available on the `docker index`_:
-
-.. code-block:: bash
-
-    FROM    centos:6.4
-
-Since we’re building a Node.js app, you’ll have to install Node.js as well as
-npm on your CentOS image. Node.js is required to run your app and npm to install
-your app’s dependencies defined in ``package.json``.
-To install the right package for CentOS, we’ll use the instructions from the
-`Node.js wiki`_:
-
-.. code-block:: bash
-
-    # Enable EPEL for Node.js
-    RUN     rpm -Uvh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm
-    # Install Node.js and npm
-    RUN     yum install -y npm-1.2.17-5.el6
-
-To bundle your app’s source code inside the docker image, use the ``ADD``
-command:
-
-.. code-block:: bash
-
-    # Bundle app source
-    ADD . /src
-
-Install your app dependencies using npm:
-
-.. code-block:: bash
-
-    # Install app dependencies
-    RUN cd /src; npm install
-
-Your app binds to port ``8080`` so you’ll use the ``EXPOSE`` command to have it
-mapped by the docker daemon:
-
-.. code-block:: bash
-
-    EXPOSE  8080
-
-Last but not least, define the command to run your app using ``CMD`` which
-defines your runtime, i.e. ``node``, and the path to our app, i.e.
-``src/index.js`` (see the step where we added the source to the container):
-
-.. code-block:: bash
-
-    CMD ["node", "/src/index.js"]
-
-Your ``Dockerfile`` should now look like this:
-
-.. code-block:: bash
-
-
-    # DOCKER-VERSION 0.3.4
-    FROM    centos:6.4
-
-    # Enable EPEL for Node.js
-    RUN     rpm -Uvh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm
-    # Install Node.js and npm
-    RUN     yum install -y npm-1.2.17-5.el6
-
-    # Bundle app source
-    ADD . /src
-    # Install app dependencies
-    RUN cd /src; npm install
-
-    EXPOSE  8080
-    CMD ["node", "/src/index.js"]
-
-
-Building your image
-+++++++++++++++++++
-
-Go to the directory that has your ``Dockerfile`` and run the following command
-to build a docker image. The ``-t`` flag let’s you tag your image so it’s easier
-to find later using the ``docker images`` command:
-
-.. code-block:: bash
-
-    docker build -t <your username>/centos-node-hello .
-
-Your image will now be listed by docker:
-
-.. code-block:: bash
-
-    docker images
-
-    > # Example
-    > REPOSITORY                 TAG       ID              CREATED
-    > centos                     6.4       539c0211cd76    8 weeks ago
-    > gasi/centos-node-hello     latest    d64d3505b0d2    2 hours ago
-
-
-Run the image
-+++++++++++++
-
-Running your image with ``-d`` runs the container in detached mode, leaving the
-container running in the background. Run the image you previously built:
-
-.. code-block:: bash
-
-    docker run -d <your username>/centos-node-hello
-
-Print the output of your app:
-
-.. code-block:: bash
-
-    # Get container ID
-    docker ps
-
-    # Print app output
-    docker logs <container id>
-
-    > # Example
-    > Running on http://localhost:8080
-
-
-Test
-++++
-
-To test your app, get the the port of your app that docker mapped:
-
-.. code-block:: bash
-
-    docker ps
-
-    > # Example
-    > ID            IMAGE                          COMMAND              ...   PORTS
-    > ecce33b30ebf  gasi/centos-node-hello:latest  node /src/index.js         49160->8080
-
-In the example above, docker mapped the ``8080`` port of the container to
-``49160``.
-
-Now you can call your app using ``curl`` (install if needed via:
-``sudo apt-get install curl``):
-
-.. code-block:: bash
-
-    curl -i localhost:49160
-
-    > HTTP/1.1 200 OK
-    > X-Powered-By: Express
-    > Content-Type: text/html; charset=utf-8
-    > Content-Length: 12
-    > Date: Sun, 02 Jun 2013 03:53:22 GMT
-    > Connection: keep-alive
-    >
-    > Hello World
-
-We hope this tutorial helped you get up and running with Node.js and CentOS on
-docker. You can get the full source code at
-https://github.com/gasi/docker-node-hello.
-
-Continue to :ref:`running_redis_service`.
-
-
-.. _Node.js wiki: https://github.com/joyent/node/wiki/Installing-Node.js-via-package-manager#rhelcentosscientific-linux-6
-.. _docker index: https://index.docker.io/
--- a/docs/sources/examples/python_web_app.rst
+++ b/docs/sources/examples/python_web_app.rst
@@ -4,8 +4,8 @@

 .. _python_web_app:

-Python Web App
-==============
+Building a python web app
+=========================

 .. include:: example_header.inc

@@ -40,7 +40,7 @@ We attach to the new container to see what is going on. Ctrl-C to disconnect

 .. code-block:: bash

-    BUILD_IMG=$(docker commit $BUILD_JOB _/builds/github.com/shykes/helloflask/master)
+    BUILD_IMG=$(docker commit $BUILD_JOB _/builds/github.com/hykes/helloflask/master)

 Save the changed we just made in the container to a new image called "_/builds/github.com/hykes/helloflask/master" and save the image id in the BUILD_IMG variable name.

@@ -70,8 +70,7 @@ lookup the public-facing port which is NAT-ed store the private port used by the

 .. code-block:: bash

-    # install curl if necessary, then ...
-    curl http://127.0.0.1:$WEB_PORT
+    curl http://`hostname`:$WEB_PORT
      Hello world!

 access the web app using curl. If everything worked as planned you should see the line "Hello world!" inside of your console.
--- a/docs/sources/examples/running_examples.rst
+++ b/docs/sources/examples/running_examples.rst
@@ -4,7 +4,7 @@

 .. _running_examples:

-Running the Examples
+Running The Examples
 --------------------

 All the examples assume your machine is running the docker daemon. To run the docker daemon in the background, simply type:
--- a/docs/sources/examples/running_redis_service.rst
+++ b/docs/sources/examples/running_redis_service.rst
@@ -4,8 +4,8 @@

 .. _running_redis_service:

-Redis Service
-=============
+Create a redis service
+======================

 .. include:: example_header.inc

@@ -34,7 +34,7 @@ Snapshot the installation

 .. code-block:: bash

-    docker ps -a  # grab the container id (this will be the first one in the list)
+    docker ps -a  # grab the container id (this will be the last one in the list)
    docker commit <container_id> <your username>/redis

 Run the service
--- a/docs/sources/examples/running_ssh_service.rst
+++ b/docs/sources/examples/running_ssh_service.rst
@@ -4,8 +4,8 @@

 .. _running_ssh_service:

-SSH Daemon Service
-==================
+Create an ssh daemon service
+============================

 .. include:: example_header.inc

@@ -20,7 +20,8 @@ minutes and not entirely smooth, but gives you a good idea.
    <div style="margin-top:10px;">
      <iframe width="800" height="400" src="http://ascii.io/a/2637/raw" frameborder="0"></iframe>
    </div>
-	
+
+
 You can also get this sshd container by using
 ::

@@ -29,49 +30,3 @@ You can also get this sshd container by using

 The password is 'screencast'

-**Video's Transcription:**
-
-.. code-block:: bash
-
-	 # Hello! We are going to try and install openssh on a container and run it as a servic 
-	 # let's pull base to get a base ubuntu image. 
-	 $ docker pull base
-	 # I had it so it was quick
-	 # now let's connect using -i for interactive and with -t for terminal 
-	 # we execute /bin/bash to get a prompt.
-	 $ docker run -i -t base /bin/bash
-	 # now let's commit it 
-	 # which container was it?
-	 $ docker ps -a |more
-	 $ docker commit a30a3a2f2b130749995f5902f079dc6ad31ea0621fac595128ec59c6da07feea dhrp/sshd 
-	 # I gave the name dhrp/sshd for the container
-	 # now we can run it again 
-	 $ docker run -d dhrp/sshd /usr/sbin/sshd -D # D for daemon mode 
-	 # is it running?
-	 $ docker ps
-	 # yes!
-	 # let's stop it 
-	 $ docker stop 0ebf7cec294755399d063f4b1627980d4cbff7d999f0bc82b59c300f8536a562
-	 $ docker ps
-	 # and reconnect, but now open a port to it
-	 $ docker run -d -p 22 dhrp/sshd /usr/sbin/sshd -D 
-	 $ docker port b2b407cf22cf8e7fa3736fa8852713571074536b1d31def3fdfcd9fa4fd8c8c5 22
-	 # it has now given us a port to connect to
-	 # we have to connect using a public ip of our host
-	 $ hostname
-	 $ ifconfig
-	 $ ssh root@192.168.33.10 -p 49153
-	 # Ah! forgot to set root passwd
-	 $ docker commit b2b407cf22cf8e7fa3736fa8852713571074536b1d31def3fdfcd9fa4fd8c8c5 dhrp/sshd 
-	 $ docker ps -a
-	 $ docker run -i -t dhrp/sshd /bin/bash
-	 $ passwd
-	 $ exit
-	 $ docker commit 9e863f0ca0af31c8b951048ba87641d67c382d08d655c2e4879c51410e0fedc1 dhrp/sshd
-	 $ docker run -d -p 22 dhrp/sshd /usr/sbin/sshd -D
-	 $ docker port a0aaa9558c90cf5c7782648df904a82365ebacce523e4acc085ac1213bfe2206 22
-	 $ ifconfig
-	 $ ssh root@192.168.33.10 -p 49154
-	 # Thanks for watching, Thatcher thatcher@dotcloud.com
-
-
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Guillaume J. Charmes	38b8373434	Implement the COPY operator within the builder	2013-04-24 14:28:51 -07:00
Guillaume J. Charmes	03b5f8a585	Make sure the destination directory exists when using docker insert	2013-04-24 13:51:28 -07:00
Guillaume J. Charmes	bc260f0225	Add insert command in order to insert external files within an image	2013-04-24 13:37:00 -07:00
Guillaume J. Charmes	45dcd1125b	Add a Builder.Commit method	2013-04-24 13:35:57 -07:00
Guillaume J. Charmes	d2e063d9e1	make builder.Run public it now runs only given arguments without sh -c	2013-04-24 12:31:20 -07:00
Guillaume J. Charmes	567a484b66	Clear the containers/images upon failure	2013-04-24 12:02:00 -07:00
Guillaume J. Charmes	5d4b886ad6	Add build command	2013-04-24 11:03:01 -07:00
				`@@ -1 +0,0 @@`
				`# Maintainer wanted! Enroll on #docker@freenode`