Packets with the given firewall mark are accepted by the bridge
driver's filter-FORWARD rules.
The value can either be an integer mark, or it can include a
mask in the format "<mark>/<mask>".
Signed-off-by: Rob Murray <rob.murray@docker.com>
Per-network option com.docker.network.bridge.trusted-host-interfaces
accepts a list of interfaces that are allowed to route
directly to a container's published ports in a bridge
network with nat enabled.
This daemon level option disables direct access filtering,
enabling direct access to published ports on container
addresses in all bridge networks, via all host interfaces.
It overlaps with short-term env-var workaround:
DOCKER_INSECURE_NO_IPTABLES_RAW=1
- it does not allow packets sent from outside the host to reach
ports published only to 127.0.0.1
- it will outlive iptables (the workaround was initially intended
for hosts that do not have kernel support for the "raw" iptables
table).
Signed-off-by: Rob Murray <rob.murray@docker.com>
commit 1932091e21 removed support
for the --allow-nondistributable-artifacts, but forgot to remove
this section.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Non-distributable artifacts (foreign layers) were introduced in commit
05bd04350b to accommodate Windows images,
for which the EULA did not allow layers to be distributed through registries
other than those hosted by Microsoft. The concept of foreign / non-distributable
layers was adopted by the OCI distribution spec in [oci#233].
These restrictions were relaxed later to allow distributing these images
through non-public registries, for which a configuration was added in the
daemon in 67fdf574d5. In 2022, Microsoft updated
the EULA and [removed these restrictions altogether][1], and the OCI distribution
spec deprecated the functionality in [oci#965].
In 2023, Microsoft [removed the use of foreign data layers][2] for their images,
making this functionality obsolete.
This patch:
- Deprecates the `--allow-nondistributable-artifacts` daemon flag and corresponding
`allow-nondistributable-artifacts` field in `daemon.json`. Setting either
option will no longer take an effect, but a deprecation warning log is added
to raise awareness about the deprecation. This warning is planned to become
an error in the next release.
- Deprecates the `RegistryConfig.AllowNondistributableArtifactsCIDRs` and
`RegistryConfig.AllowNondistributableArtifactsHostnames` fields in the
`GET /info` API response. For API version v1.48 and lower, the fields are
still included in the response, but always `null`. In API version v1.49 and
higher, the field will be omitted entirely.
- Deprecates the `api/types/registry/ServiceConfig.AllowNondistributableArtifactsCIDRs`
field.
- Deprecates the `api/types/registry/ServiceConfig.AllowNondistributableArtifactsHostnames`
field.
- Deprecates the `registry.ServiceOptions.AllowNondistributableArtifacts` field.
[oci#233]: https://github.com/opencontainers/image-spec/pull/233
[oci#965]: https://github.com/opencontainers/image-spec/pull/965
[1]: https://techcommunity.microsoft.com/blog/containers/announcing-windows-container-base-image-redistribution-rights-change/3645201
[2]: https://techcommunity.microsoft.com/blog/containers/announcing-removal-of-foreign-layers-from-windows-container-images/3846833
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use the same logic to generate IPAMConf for IPv6 as for IPv4.
- When no fixed-cidr-v6 is specified, rather than error out, use
the default address pools (as for an IPv4 default bridge with no
fixed-cidr, and as for user-defined networks).
- Add daemon option --bip6, similar to --bip.
- Necessary because it's the only way to override an old address
on docker0 (daemon-managed default bridge), as illustrated by
test cases.
- For a user-managed default bridge (--bridge), use IPv6 addresses
on the user's bridge to determine the pool, sub-pool and gateway.
Following the same rules as IPv4.
- Don't set up IPv6 IPAMConf if IPv6 is not enabled.
Signed-off-by: Rob Murray <rob.murray@docker.com>
The daemon no longer depends on the iptables/ip6tables filter-FORWARD
chain's policy being DROP in order to implement its port filtering
rules.
However, if the daemon enables IP forwarding in the host's system
config, by default it will set the policy to DROP to avoid potential
security issues for other applications/networks.
If docker does need to enable IP forwarding, but other applications
on the host require filter-FORWARD's policies to be ACCEPT, this
option can be used to tell the daemon to leave the policy unchanged.
(Equivalent to enabling IP forwarding before starting the daemon,
but without needing to do that.)
Signed-off-by: Rob Murray <rob.murray@docker.com>
This option was added in a08abec9f8,
as part of Docker v25.0, but did not update the docs and manpage.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The --feature flag allows the boolean value to be omitted.
If only a name is provided, the default is "true".
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Mostly, this makes sure that literals (such as true, false, host,
private, examples of options usage etc.) are typeset in bold, except for
filenames, which are typeset in italic.
While at it,
- remove some default values from synopsis as it should not
be there;
- fix man pages references (page name in bold, volume number in
regular).
This is not a complete fix, but a step in the right direction.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Escape asterisks and underscores, that have special meaning in
Markdown. While most markdown processors are smart enough to
distinguish whether it's a literal * or _ or a formatting directive,
escaping makes things more explicit.
2. Fix using wrong level of headings in some dm options (most are ####,
but some were #####).
3. Do not use sub-heading for examples in some dm options (this is how
it's done in the rest of the man page).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This fix tries to address issues raised in moby/moby#44346.
The max-concurrent-downloads and max-concurrent-uploads limits are applied for the whole engine and not for each pull/push command.
Signed-off-by: Luis Henrique Mulinari <luis.mulinari@gmail.com>
- the `--disable-legacy-registry` daemon flag was removed
- duplicate keys with conflicting values for engine labels
now produce an error instead of a warning.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fix 19 typos, grammatical errors and duplicated words.
These fixes have minimal impact on the code as these are either in the
doc files or in comments inside the code files.
Signed-off-by: Abdur Rehman <abdur_rehman@mentor.com>
This builds (and depends) on https://github.com/moby/moby/pull/34087
Version 2:
- remove --ipc argument validation (it is now done by daemon)
- add/document 'none' value
- docs/reference/run.md: add a table with better modes description
- dockerd(8) typesetting fixes
Version 3:
- remove ipc mode tests from cli/command/container/opts_test.go
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This is a new option added specifically to allow for debugging of bugs
in Docker's storage drivers or libdm itself.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Prepare to move the dockerd man page back to this repository from
docker/cli, retaining history.
This partially reverts commit b5579a4ce3.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The --allow-nondistributable-artifacts daemon option specifies
registries to which foreign layers should be pushed. (By default,
foreign layers are not pushed to registries.)
Additionally, to make this option effective, foreign layers are now
pulled from the registry if possible, falling back to the URLs in the
image manifest otherwise.
This option is useful when pushing images containing foreign layers to a
registry on an air-gapped network so hosts on that network can pull the
images without connecting to another server.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
Instead of forcing users to manually configure a block device to use
with devmapper, this gives the user the option to let the devmapper
driver configure a device for them.
Adds several new options to the devmapper storage-opts:
- dm.directlvm_device="" - path to the block device to configure for
direct-lvm
- dm.thinp_percent=95 - sets the percentage of space to use for
storage from the passed in block device
- dm.thinp_metapercent=1 - sets the percentage of space to for metadata
storage from the passed in block device
- dm.thinp_autoextend_threshold=80 - sets the threshold for when `lvm`
should automatically extend the thin pool as a percentage of the total
storage space
- dm.thinp_autoextend_percent=20 - sets the percentage to increase the
thin pool by when an autoextend is triggered.
Defaults are taken from
[here](https://docs.docker.com/engine/userguide/storagedriver/device-mapper-driver/#/configure-direct-lvm-mode-for-production)
The only option that is required is `dm.directlvm_device` for docker to
set everything up.
Changes to these settings are not currently supported and will error
out.
Future work could support allowing changes to these values.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix fixes issue raised in 29492 where it was not
possible to specify a default `--default-shm-size` in daemon
configuration for each `docker run``.
The flag `--default-shm-size` which is reloadable, has been
added to the daemon configuation.
Related docs has been updated.
This fix fixes 29492.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
