These comments were added to enforce using the correct import path for
our packages ("github.com/docker/docker", not "github.com/moby/moby").
However, when working in go module mode (not GOPATH / vendor), they have
no effect, so their impact is limited.
Remove these imports in preparation of migrating our code to become an
actual go module.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Prevent accidentally shadowing these errors, which are used in defers, and
while at it, also fixed some linting warnings about unhandled errors.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
daemon/graphdriver/fuse-overlayfs/fuseoverlayfs.go:527:2: naked return in func `fusermountU` with 25 lines of code (nakedret)
return
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 2ce811e632 migrated the use of the
userns package to the github.com/moby/sys/user module.
After further discussion with maintainers, it was decided to move the
userns package to a separate module, as it has no direct relation with
"user" operations (other than having "user" in its name).
This patch migrates our code to use the new module.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The userns package in libcontainer was integrated into the moby/sys/user
module at commit [3778ae603c706494fd1e2c2faf83b406e38d687d][1].
The userns package is used in many places, and currently either depends
on runc/libcontainer, or on containerd, both of which have a complex
dependency tree. This patch is part of a series of patches to unify the
implementations, and to migrate toward that implementation to simplify
the dependency tree.
[1]: 3778ae603c
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The RefCounter is used in both graphdrivers and snapshotters. Move it
to a separate package to help decoupling snapshotters and graphdrivers,
and make it internal, as it's not intended to be used as a generic utility
package (we can still make it public if there would be a need).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The Checker interface was introduced in 1ba05cdb6a
as an optimization to allow passing a simplified check for situations that
don't require mountinfo.Mounted to be executed (as that may result in parsing
`/proc/self/mountinfo`).
The Checker was defined as an interface with a single `IsMounted` method,
possibly with the intent to allow for additional kind of checks to be added.
No new additions were made since its inception 9 Years ago, and if a need would
arrive, could probably be implemented as part of the check.
This patch simplifies the definition to a function, removing the need to
implement a wrapper struct just to satisfy the interface. The `Checker`
type definition is somewhat redundant, but is kept to have a place to
provide GoDoc.
The `NewFsChecker` and `NewDefaultChecker` utilities are removed as part
of this change, favoring a local definition for storage-drivers that
used them.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These utilities were used in both graphdrivers and snapshotters. Move them
to a separate package, to help decoupling snapshotters and graphdrivers,
and make it internal, as it's not intended to be used as a generic utility
package (we can still make it public if there would be a need).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The only external consumer are the `graphdriver` and `graphdriver/shim`
packages in github.com/docker/go-plugins-helpers, which depended on
[ContainerFS][1], which was removed in 9ce2b30b81.
graphdriver-plugins were deprecated in 6da604aa6a,
and support for them removed in 555dac5e14,
so removing this should not be an issue.
Ideally this package would've been moved inside `daemon/internal`, but it's used
by the `daemon` (cleanupContainer), `plugin` package, and by `graphdrivers`,
so needs to be in the top-level `internal/` package.
[1]: 6eecb7beb6/graphdriver/api.go (L218)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The github.com/containerd/containerd/log package was moved to a separate
module, which will also be used by upcoming (patch) releases of containerd.
This patch moves our own uses of the package to use the new module.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Now that most uses of reexec have been replaced with non-reexec
solutions, most of the reexec.Init() calls peppered throughout the test
suites are unnecessary. Furthermore, most of the reexec.Init() calls in
test code neglects to check the return value to determine whether to
exit, which would result in the reexec'ed subprocesses proceeding to run
the tests, which would reexec another subprocess which would proceed to
run the tests, recursively. (That would explain why every reexec
callback used to unconditionally call os.Exit() instead of returning...)
Remove unneeded reexec.Init() calls from test and example code which no
longer needs it, and fix the reexec.Init() calls which are not inert to
exit after a reexec callback is invoked.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Finish the refactor which was partially completed with commit
34536c498d, passing around IdentityMapping structs instead of pairs of
[]IDMap slices.
Existing code which uses []IDMap relies on zero-valued fields to be
valid, empty mappings. So in order to successfully finish the
refactoring without introducing bugs, their replacement therefore also
needs to have a useful zero value which represents an empty mapping.
Change IdentityMapping to be a pass-by-value type so that there are no
nil pointers to worry about.
The functionality provided by the deprecated NewIDMappingsFromMaps
function is required by unit tests to to construct arbitrary
IdentityMapping values. And the daemon will always need to access the
mappings to pass them to the Linux kernel. Accommodate these use cases
by exporting the struct fields instead. BuildKit currently depends on
the UIDs and GIDs methods so we cannot get rid of them yet.
Signed-off-by: Cory Snider <csnider@mirantis.com>
pkg/system historically has been a bit of a kitchen-sink of things that were
somewhat "system" related, but didn't have a good place for. EnsureRemoveAll()
is one of those utilities. EnsureRemoveAll() is used to both unmount and remove
a path, for which it depends on both github.com/moby/sys/mount, which in turn
depends on github.com/moby/sys/mountinfo.
pkg/system is imported in the CLI, but neither EnsureRemoveAll(), nor any of its
moby/sys dependencies are used on the client side, so let's move this function
somewhere else, to remove those dependencies from the CLI.
I looked for plausible locations that were related; it's used in:
- daemon
- daemon/graphdriver/XXX/
- plugin
I considered moving it into a (e.g.) "utils" package within graphdriver (but not
a huge fan of "utils" packages), and given that it felt (mostly) related to
cleaning up container filesystems, I decided to move it there.
Some things to follow-up on after this:
- Verify if this function is still needed (it feels a bit like a big hammer in
a "YOLO, let's try some things just in case it fails")
- Perhaps it should be integrated in `containerfs.Remove()` (so that it's used
automatically)
- Look if there's other implementations (and if they should be consolidated),
although (e.g.) the one in containerd is a copy of ours:
https://github.com/containerd/containerd/blob/v1.5.9/pkg/cri/server/helpers_linux.go#L200
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
daemon/graphdriver/fuse-overlayfs/fuseoverlayfs.go:101:63: SA9002: file mode '700' evaluates to 01274; did you mean '0700'? (staticcheck)
if err := idtools.MkdirAllAndChown(path.Join(home, linkDir), 700, currentID); err != nil {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Do not use 0701 perms.
0701 dir perms allows anyone to traverse the docker dir.
It happens to allow any user to execute, as an example, suid binaries
from image rootfs dirs because it allows traversal AND critically
container users need to be able to do execute things.
0701 on lower directories also happens to allow any user to modify
things in, for instance, the overlay upper dir which neccessarily
has 0755 permissions.
This changes to use 0710 which allows users in the group to traverse.
In userns mode the UID owner is (real) root and the GID is the remapped
root's GID.
This prevents anyone but the remapped root to traverse our directories
(which is required for userns with runc).
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit ef7237442147441a7cadcda0600be1186d81ac73)
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 93ac040bf0)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Various dirs in /var/lib/docker contain data that needs to be mounted
into a container. For this reason, these dirs are set to be owned by the
remapped root user, otherwise there can be permissions issues.
However, this uneccessarily exposes these dirs to an unprivileged user
on the host.
Instead, set the ownership of these dirs to the real root (or rather the
UID/GID of dockerd) with 0701 permissions, which allows the remapped
root to enter the directories but not read/write to them.
The remapped root needs to enter these dirs so the container's rootfs
can be configured... e.g. to mount /etc/resolve.conf.
This prevents an unprivileged user from having read/write access to
these dirs on the host.
The flip side of this is now any user can enter these directories.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit e908cc3901)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The implementation in libcontainer/system is quite complicated,
and we only use it to detect if user-namespaces are enabled.
In addition, the implementation in containerd uses a sync.Once,
so that detection (and reading/parsing `/proc/self/uid_map`) is
only performed once.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Switch to moby/sys/mount and mountinfo. Keep the pkg/mount for potential
outside users.
This commit was generated by the following bash script:
```
set -e -u -o pipefail
for file in $(git grep -l 'docker/docker/pkg/mount"' | grep -v ^pkg/mount); do
sed -i -e 's#/docker/docker/pkg/mount"#/moby/sys/mount"#' \
-e 's#mount\.\(GetMounts\|Mounted\|Info\|[A-Za-z]*Filter\)#mountinfo.\1#g' \
$file
goimports -w $file
done
```
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
`fuse-overlayfs` provides rootless overlayfs functionality without depending
on any kernel patch.
Aside from rootless, `fuse-overlayfs` could be potentially used for eliminating
`chown()` calls that happen in userns-remap mode, because `fuse-overlayfs` also
provides shiftfs functionality.
System requirements:
* fuse-overlayfs needs to be installed. Tested with 0.7.6.
* kernel >= 4.18
Unit test: `go test -exec sudo -v ./daemon/graphdriver/fuse-overlayfs`
The implementation is based on Podman's `overlay` driver which supports
both kernel-mode overlayfs and fuse-overlayfs in the single driver instance:
https://github.com/containers/storage/blob/39a8d5ed/drivers/overlay/overlay.go
However, Moby's implementation aims to decouple `fuse-overlayfs` driver from the
kernel-mode driver (`overlay2`) for simplicity.
Fix#40218
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
