These comments were added to enforce using the correct import path for
our packages ("github.com/docker/docker", not "github.com/moby/moby").
However, when working in go module mode (not GOPATH / vendor), they have
no effect, so their impact is limited.
Remove these imports in preparation of migrating our code to become an
actual go module.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "local" client does not use containerd, but implements the same interface,
many args are not used though, so remove these to make it more clear what's
actually in use.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "local" client does not use containerd, but implements the same interface,
many args are not used though, so remove these to make it more clear what's
actually in use.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Also remove an intermediate var, and remove a "WithError" in favor of
adding the error field to the "WithFields".
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Noticed this log in CI on Windows, which wasn't clear if it was an error
in Windows or in Docker;
2025-02-25T03:21:35.9273942Z [Error] Handler for POST /v1.48/containers/1713bc845f9bde79aa0017c16613fbfc8810b3272b31dbb2535d3fb1a3550f9c/pause returned error: cannot pause container 1713bc845f9bde79aa0017c16613fbfc8810b3272b31dbb2535d3fb1a3550f9c: Unimplemented: not implemented
Looks like it's a feature that's not implemented when using process-isolation,
so updating the error-message to make it more identifiable as an error
produced by us.
I kept the type to be a "not implemented", which will be converted to a
501 HTTP status (so still logged as error); alternatively, we could make
this a "invalid parameter".
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Update to containerd 1.7.18, which now migrated to the errdefs module. The
existing errdefs package is now an alias for the module, and should no longer
be used directly.
This patch:
- updates the containerd dependency: https://github.com/containerd/containerd/compare/v1.7.17...v1.7.18
- replaces uses of the old package in favor of the new module
- adds a linter check to prevent accidental re-introduction of the old package
- adds a linter check to prevent using the "log" package, which was also
migrated to a separate module.
There are still some uses of the old package in (indirect) dependencies,
which should go away over time.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Split task creation and start into two separate method calls in the
libcontainerd API. Clients now have the opportunity to inspect the
freshly-created task and customize its runtime environment before
starting execution of the user-specified binary.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The github.com/containerd/containerd/log package was moved to a separate
module, which will also be used by upcoming (patch) releases of containerd.
This patch moves our own uses of the package to use the new module.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Synchronize the code to do the same thing as Exec.
reap doesn't need to be called before the start event was sent.
There's already a defer block which cleans up the process in case where
an error occurs.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Error check in defer block used wrong error variable which is always nil
if the flow reaches the defer. This caused the `newProcess.Kill` to be
never called if the subsequent attemp to attach to the stdio failed.
Although this only happens in Exec (as Start does overwrite the error),
this also adjusts the Start to also use the returned error to avoid this
kind of mistake in future changes.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
The signatures of functions in containerd's errdefs packages are very
similar to those in our own, and it's easy to accidentally use the wrong
package.
This patch uses a consistent alias for all occurrences of this import.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
ContainerD unconditionally sets the ID of a task to its container's ID.
Emulate this behaviour in the libcontainerd local_windows implementation
so that the daemon can use ProcessID == ContainerID (in libcontainerd
terminology) to identify that an exit event is for the container's task
and not for another process (i.e. an exec) in the same container.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The containerd client is very chatty at the best of times. Because the
libcontained API is stateless and references containers and processes by
string ID for every method call, the implementation is essentially
forced to use the containerd client in a way which amplifies the number
of redundant RPCs invoked to perform any operation. The libcontainerd
remote implementation has to reload the containerd container, task
and/or process metadata for nearly every operation. This in turn
amplifies the number of context switches between dockerd and containerd
to perform any container operation or handle a containerd event,
increasing the load on the system which could otherwise be allocated to
workloads.
Overhaul the libcontainerd interface to reduce the impedance mismatch
with the containerd client so that the containerd client can be used
more efficiently. Split the API out into container, task and process
interfaces which the consumer is expected to retain so that
libcontainerd can retain state---especially the analogous containerd
client objects---without having to manage any state-store inside the
libcontainerd client.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Older versions of Go don't format comments, so committing this as
a separate commit, so that we can already make these changes before
we upgrade to Go 1.19.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows the postContainersKill() handler to pass values as-is. As part of
the rewrite, I also moved the daemon.GetContainer(name) call later in the
function, so that we can fail early if an invalid signal is passed, before
doing the (heavier) fetching of the container.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Arbitrary here does not include '', best to catch that one early as it's
almost certainly a mistake (possibly an attempt to pass a POSIX path
through this API)
Signed-off-by: Paul "TBBle" Hampson <Paul.Hampson@Pobox.com>
Windows Server 2016 (RS1) reached end of support, and Docker Desktop requires
Windows 10 V19H2 (version 1909, build 18363) as a minimum.
This patch makes Windows Server RS5 / ltsc2019 (build 17763) the minimum version
to run the daemon, and removes some hacks for older versions of Windows.
There is one check remaining that checks for Windows RS3 for a workaround
on older versions, but recent changes in Windows seemed to have regressed
on the same issue, so I kept that code for now to check if we may need that
workaround (again);
085c6a98d5/daemon/graphdriver/windows/windows.go (L319-L341)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
These were added in 94d70d8355 for Windows TP4,
but no longer used after 331c8a86d4 removed
support for TP4.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
In dockerd we already have a concept of a "runtime", which specifies the
OCI runtime to use (e.g. runc).
This PR extends that config to add containerd shim configuration.
This option is only exposed within the daemon itself (cannot be
configured in daemon.json).
This is due to issues in supporting unknown shims which will require
more design work.
What this change allows us to do is keep all the runtime config in one
place.
So the default "runc" runtime will just have it's already existing shim
config codified within the runtime config alone.
I've also added 2 more "stock" runtimes which are basically runc+shimv1
and runc+shimv2.
These new runtime configurations are:
- io.containerd.runtime.v1.linux - runc + v1 shim using the V1 shim API
- io.containerd.runc.v2 - runc + shim v2
These names coincide with the actual names of the containerd shims.
This allows the user to essentially control what shim is going to be
used by either specifying these as a `--runtime` on container create or
by setting `--default-runtime` on the daemon.
For custom/user-specified runtimes, the default shim config (currently
shim v1) is used.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Trying to start a container that is already running is not an
error condition, so a `304 Not Modified` should be returned instead
of a `409 Conflict`.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
